I'm trying to account for the date and have it change if the original falls on a weekend. I wrote it using the Weekday function, which I believe is a worksheet function and not a VBA one, as I keep getting a run-time error 5 (invalid procedure, call, or argument). Either that or I have something programmed wrong in it.
View 8 RepliesI've got a long formula here. If the resulting expression is equal to "0-0" I want it to go blank as if it was an error, and if it isn't, I want it to show the resulting expression as normal.
View 11 Replies View Relatedif there is an eomonth() equivalent in VBA?
View 9 Replies View RelatedI have 4 lengths in four columns in a random order, and need to compare them to see whether they are equal lengths.
I Have figured out how to order them so I can compare them, but can't think of a formula to show whether they are equivilent (eg 1000m = 1km) True or False outcome is fine.
I need a loop function (i guess a do while or do until code) so whenever the word 'Non-Current' appears in colum A enter a 1 in colum E until the word 'Total Non-C' is reached at which point the loop must end.
Such as:
A B C D E
NON-CURRENT 6 4 5 1*
ABSA 4 5 2 1*
BARCLAYS 3 2 8 1*
NED 0 8 6 1*
TOTAL NON-C 4 6 7 0
I've been learnig VB applying it to automating some excel workbooks. What I'd like to know is if there's an equivalent funtion in VB to the IN function in Pascal. The In function in Pascal used to work like this:
If I used the KeyPress (Function in Pascal), I could evaluate which key was pressed and compare it to an array of options. For Example:
HTML Code:
if Chr(KeyPressed) IN ["0".."9",".","+","-","*","/"] then
Expression = Expression + Chr(KeyPressed)
Instead of Comparing each option separadtly. Now my question is whether or not there's an equivalent function in VB.
I have two worksheets: "Report" & "Hou Jobs". In Report worksheet, I need a code equivalent to following formula so that it returns value in cell D5.
If the values in cells B5 & B8 change, the value should update itself.
=VLOOKUP(B5,'HOU Jobs'!A4:B667,2,FALSE)
When I tried len(nYear) where nYear is a number like 2006, I don't get the number of characters in the number. I know that's confusing strings with numbers, but...
Is there a VBA function that returns the number of numbers deep in an integer; ex. if nYear = 2006, the function would return 4?
I could easily do a < or > line of code, but I'm just curious if there's another way to do it.
i am trying to finish a spreadsheet off using cos functions. I want to convert 26 degrees into 0.8988. when i use my hand calculator i type 26 in then press cos and it converts it to 0.8988 which is correct, but when i try to use the excel cos function it gives 0.646919322 which is in-correct.
View 5 Replies View RelatedI have a worksheet (named Deduction Worksheet) that is a running record of all part removals. A removal is denoted by a row entry that contains removal particulars. The first column (Column A) in each row contains a unique number for each part. Column K shows how many part units were removed in that removal:
Column A
... Columns ... B to J ...
Column K
Unq001
various
[Code]....
In the code above 'crng' is the criteria range, 'sValue' the criteria and 'srng' the sum range (which follows the normal SUMIF function within a worksheet). Both the 'crng" and 'sValue' values contain text, / and numbers.
note that other elements on the userform code look at data on other worksheets (not sure if this will effect this).
I've searched the boards & haven't found anything as uncomplicated as what I'm looking for. I know I could use Sumproduct, but for something this simple is there anything I can do with Sumif? This in effect is my worksheet.
AB
1AD200=SUMIF('Sheet2’!B:B, A1, 'Sheet2’!C:C)
All I want to do is change the criteria to be the equivalent of A1 OR B2 (ie checking the range for either match. No way to do that in a sumif? I'm looking for the least complicated, easiest to adjust/edit formula possible.
I have to sets of data, each in a sheet with the first column as identical for both sheets. Sheet2 contains two series of 6 rows, each for a specific first column (""B Code").
Now I want to find the values of "TCT-C" column in sheet1 (for each range of 6 rows that the "B Code" is match) which corresponds to the row number that "TCT" in sheet2 is maximum (again for 6 rows). The point is, I need to shift to another series of 6 rows in sheet2 once the "B Code" does not match.
When I need to return numerical data with multiple criteria, I use the SUMIFS and it works fine. But when I need to return a text string, the function is not called for. What function can I use to make this happen? I've tried SUMPRODUCT, which I've had success with in the past, but it's not working this time. Maybe I'm laying it out wrong, but this is how I currently have it:
=SUMPRODUCT(column of text to be returned,((column of criteria1)=criteria1)*((column of criteria2)=criteria2))
Do I need to fix this formula or use something else?
Does anyone know the VBA equivalent to using the Shift-Arrow keys on the keyboard? I am wanting a macro to do this for me. Specifically I am wanting to use Shift-Arrow Right.
View 9 Replies View RelatedI am in need of some excel advice relating to date calculations. Basically I need a function that is the equivalent of WORKDAY but for hours instead. I have a series of events that take a certain length of time to complete, most of them less than a day but some more than. By way of example see the screenshot below:
In reality the last three operations would have to take place on the 27th of April, with the Welding operation starting on the end of the 25th around 7pm. The plant is running a 24 hour day, and works 5 days a week. How can I calculate the times in hours offset rather than going day by day? I need to account for
* Weekends
* Fixed Holidays
* Operations running as seamlessly as possible
Any advice welcome. I have attempted to use WORKDAY with the number of days to deduct rounded to the nearest day and then subtracting the operation time but this results in errors where operations would cumulatively go over a working day. The objective is by knowing when the end product is needed and knowing how long each operation takes it is possible to discover when to start manufacture. VBA or Formula code is fine as this will be integrated into a VBA project.
I need the equivalent of a double conditional in the Function SUMIF.
In my example (a test file is attached), I have used hypothetical stock trades as a test case.
Column B has the type of order (Buy or Sell).
Column C has the stock trading symbol.
Column F has the net amount of the transaction on that line.
I want to populate Columns I & J, where I & J are the total Buy and Sell cost for each stock listed in Column H.
So, for example I need to calculate the total "Net Amount" of "Buy" transactions for Stock ABC, and put it in Cell I2. I also need to put the the total "Net Amount" of "Sell" transactions for Stock ABC, and put it in Cell J2.
I'm sure that looking at the attached sample EXCEL workbook, will make it clearer than all my verbiage.
So, conceptually, I need to evaluate Columns B, C and F and put the sum of transactions in Cell I2 for those cases with "Buy" in Column B AND "ABC" in Column C.
If there is no syntax for a double conditional in SUMIF, then I'd be happy with any formula for Cell I2 that accomplished the tax.
I'm not terribly familiar with array formulas, but have used them on occasion if that's what's required to emulate a double conditional in SUMIF.
There is a way to use SQL sentences to do queries in a table in Sheet1 (A to F) to put the output in Sheet2 the values in columns A, B and E from table in Sheet1 when values in column B are equal to 5?
I mean, is possible to do this within the same workbook? or a equivalent VBA code?
I am new to Excel but not programming and I am looking for a recommendation for the following. I have a spreadsheet that simply takes the length and width of an area and computes the square feet and yardage and other sundry items. I am entering the feet/inches as follows:
Example: 11.3 (equals 11/ft 3/inches)
The correct decimal conversion should be 11.25 but, obviously, it does not know that the number to the right of the decimal point is an indicator of inches. (ex.: .5=.42, .7=.58, .9=.75, .11=.92)
I have approached this from the stand point of an IF condition, finding the position of the "." and grabbing everything to the right (+1) but I understand that the limitation is 7 nested IFs.
Can someone get me kick-started on what the best approach would be to get my entry to convert to the true decimal equivalent? Currently, I am simply doing the conversion from memory but I would rather automate this sometimes errant approach.
I know the formula =large but my problem is the formula for the equivalent value for it. Note: In my xcel file attached you can see there are multiple items with the same total numbers and also blanks
View 3 Replies View RelatedDates in Column A
Currency in Column B (expressed as EUR, CHF or GBP)
Amount in Column C
And I'm trying to get the USD equivalent in column D based on the exchange rate at the time.
In Sheet 2 I have a table of the historical exchange rates like this:
DateEURGBPCHF
08/05/20060.786270.538151.2277
09/05/20060.784470.536751.2224
10/05/20060.781360.536271.2185
11/05/20060.778050.530761.2108
12/05/20060.775880.528811.2019
15/05/20060.779780.530911.2089
I have the formula where i can change a date to its equivalent in terms of quarters system with a date:
=CHOOSE(MATCH(MONTH(A2),{1,4,7,10}),"Winter","Spring","Summer","Fall")&YEAR(A2)
This is a school year configuration.
ex.
A2 = 10/1/2005: with the formula up there it turns into Fall 2005
i want to be able to add any number of years and the formula will still come up with the quarters system
also i would like A2 to be stationary and create a list of quarters for each year i add on
ex.
A2= 10/1/2005 B2=Fall 2005
B3=Winter 2006
B3=Spring 2006
B5=Summer 2006
B6=Fall 2006
etc.
If this is all possible lastly I would like to negate summer quarters
I am looking for a conditional formula that can be applied to a cell so that when I enter a number with a positive value, it:
1) Converts it to its negative equivalent value.
2) Displays in the value in the cell with parentheses around the number to indicate that the value is negative.
I am trying to do this without having to reference another cell to provide the entry or display the outcome.
how can i make a worksheet/formula that automatically look for the equivalent score in a given transmutation table.
example: i have an exam of 10 items, what will be my formula to so that it will automatically look for the equivalent score under the transmutation table of 10 items
I need to set up something that "calculates" an orders next delivery date. We deliver on Tuesdays, Wednesdays, and Thursdays for different stores. IE.
Store 1 - Today's Date-Wednesday 10/28/09 = Next delivery date is Tuesday 11/3/09.
Store 2 - Today's Date-Wednesday 10/28/09 = Next delivery date is Wednesday 11/4/09.
Store 3 - Today's Date-Wednesday 10/28/09 = Next delivery date is Thursday 10/29/09.
looking for for some help on a fairly simple problem: i've attached a worksheet, and in column B (Due to Supply Chain) i'd like to insert a formula that will subtract 21 days from the date in column Z (Pub Date), and then round that date to the nearest wednesday. is this possible?
fyi: the dates in column Z are in a yyyy-mm-dd format; they don't have to remain that way.
I'm trying to do an IF function involving the date. Basically if the current day is a weekday then I want the cell value to be 30. If the current date is a weekend then I want the cell value to be 50. I'm pretty lost on how to write the formula.
View 3 Replies View RelatedIm working on a spreadsheet which has a column of dates formatted in "dd/mm/yy" there are always 365 days listed but these could be between any period. I am trying to create a table which looks up all mondays, tuesdays etc ....
I need a formula to find the first monday in the list and then to fill the rest of the tables. So far I manually input the monday and the rows below use =previous row + 7 to fill the following mondays, then in the next section it will refer to the monday and +1 to populate tuesday then the +7 in the rows below.
Ideally i would like a system which would log these dates automatically, the trouble is, sometimes the Thursday or another day will be first ( eg if the raw data is between 01/01/09 - 30/12/09 then the 01/01/09 is a thursday so the first thursday is 01 but the first monday will be 04/01/09.
I have a running schedule with mutlile tasks scheduled for different day # or the same and would like to have the dates auto fill in once I enter the start
date.
example:
4/20/06 task 1 day 1
? task 2 day 2
? task 3 day 2
? task 4 day 3
Keeping in mind that I don't want to include weekends and that I'll need to delete a range of holiday dates.
this formula in a cell. But I noticed it doesn't work if the day is friday because the next working day would be Monday.
I tried to replace the Today with weekday but I'm not doing something right.
I am receiving the data from the client , I want the serial no with the day of the date ... like this .. i ope u got it..
Like
thu01 20-Sep 2007
thu02 20-Sep 2007
thu03 20-Sep 2007
thu04 20-Sep 2007
Fri01 21 Sep 2007
Fri02 21 Sep 2007
Fri03 21 Sep 2007
Fri04 21 Sep 2007
Mon01 23 sep2007
mon02 23 sep 2007
I may receive more that 100 mails in a day .. so the serial should get updated of its own.