IsProtected.ActiveWorkbook.Sheets(1)
Jul 3, 2006How can I tell if a Sheet is protected (via VBA) ? (Excel 2003)
Something like: "If IsProtected. ActiveWorkbook.Sheets(1)..."
Returnig True or False will be fine.
How can I tell if a Sheet is protected (via VBA) ? (Excel 2003)
Something like: "If IsProtected. ActiveWorkbook.Sheets(1)..."
Returnig True or False will be fine.
I noticed all the code that i have on a userform using activeworkbook will relate to whatever the last active workbook was "who would have guessed hay" Seeing thisworkbook used a lot i decided to go through the whole project and change all activeworkbook too thisworkbook.sheet1 During this i also made a few other changes that i was confident in, When i run it now it errors on the thisworkbook.sheet1.
Is this the wrong way of using thisworkbook to make sure the code always deals with the correct file. (will this ever be affected if the file goes through a Save As)
Or is it during my over conifedents that i have made a error somewhere else and the debuger is point me here cos it hates me.
I have a userform that presents the user with 4 choices and once they click on one choice a macro runs that filters and formats the data and when the user clicks on the button start over it will reopen the file they were just using prior to the changes occurring. The reason for this is the same spreadsheet is printed up to 4 times with different information (remember the part where the data was filtered?). So basically the user clicks on option 1 the macro runs formating the page and then the user clicks start over (different userform then the first one) and the spreadsheet closes and reopens before the changes.
The way I have excel reopening the file now is by having the user input the file name into a text box and clicking OK this passes the file name to the open code in VBA. How can I tell the code the name of the sheet after the sheet is no longer active (because a userform was made active)? Basically the end goal is for the user to click over and excel will just reopen the file without any user input.
how I can make the following work no matter which worksheet I might be on?
ActiveWorkbook.Worksheets("Sheet16").sort.SortFields.Clear
I have the below code,
But i want to adapt the "ActiveWorkbook.Sendmail" so I can attach my current workbook as it is, to the email.
Private Sub CommandButton10_Click()
Dim OutApp As Object
Dim OutMail As Object
Dim strbody As String
Set OutApp = CreateObject("Outlook.Application")
OutApp.Session.Logon
Set OutMail = OutApp.CreateItem(0)
On Error Resume Next
With OutMail
.To = "you@email.com"
.CC = "me@email.com"
.BCC = ""
.Subject = "Testing send to multiple emails."
.Body = "Please review." & vbCrLf & vbCrLf & ActiveWorkbook.FullName
.Send 'or use .Display
End With
On Error GoTo 0
Set OutMail = Nothing
Set OutApp = Nothing
Dim Msg, Style, Title
Msg = "E-mail has been sent " & Chr(13) & Chr(10) & "Press OK to continue."
Style = vbOKOnly + vbInformation
Title = "Open Issues List"
Response = MsgBox(Msg, Style, Title, Help, Ctxt)
End Sub
I run the macro on a currently open workbook (name could be anything) and open another workbook (name known) and step through the sheets copying various blocks of data across to the first workbook. I need to Activate the 2 workbooks alternatively as I move data back and forth and move from sheet to sheet. What I can't work out is how to determine in code what the "unknown" workbook name is so that I can make sure I activate the right workbook in the code.
I tried Activating the workbook with the "unknown" name and setting a variable = ActiveWorkbook.Name. However the value of this variable changes during the code run when you activate the other book. Is there any way to collect this value and "freeze" it so it won't change as the code runs? At the moment I have got round it by ensuring the "unknown" book is the only one open before I start and refer to it as Workbooks(1) in the code.
I have the following code that is going to trigger an export macro and an import macro allowing the user to upgrade the version of their report;
Sub Upgrade_SLA_Report()
x = MsgBox("Is the file you wish to export from open?" & vbCrLf & vbCrLf & "If it is click yes" & vbCrLf & "If its not click No" _
& vbCrLf & "If you need to abort the macro click cancel", vbYesNoCancel)
Select Case x
Case 6
MsgBox "Please use the Windows menu in Excel to ensure that the file" _
& "you wish to export from is the ActiveWorkbook!", vbInformation
' Missing step
If ActiveWorkbook.Name = ThisWorkbook.Name Then Exit Sub
ExpWb = ActiveWorkbook.Name
Case 7
On Error GoTo Handler
.......................End Select
Problem is, I have a missing step within Case 6 which allows the user to ensure that the file they are exporting from is the ActiveWorkbook.
I am trying to build a macro to be placed in a blank spreadsheet for use as a template.
My development platform is Excel 2003 on Windows XP SP2. The script was initially recorded as a macro against a single data file with absolute range references and worked both on my develpment platform and on the production platform (Excel 2000 on Windows 2000). However, I have been having fits trying to convert it to dynamic addressing for the PivotCaches.Add. I develop Excel solutions a few times a year and this pivot table is the deepest I have dug into OLE code, so I am not an expert and could have a simple problem. I included the entire macro because I am unsure if there are sideeffects to what some of it is doing. I am getting a 1004 error "The PivotTable field is not valid. To create a PivotTable report, you must use data that is organized as a list with labeled columns. If you are changing the name of a PivotTable field, you must type a new name for the field."
Since I do not get this error with the absolute references, I am puzzled as to what to fix. That is another reason for supplying the entire macro: ...
I have a workbook that is used by many people on a network- I am editing and saving data throughout the day, and the other users are constantly having to close and re-open thier file in order to have the most recent data. today i came across the '.UpdateFromFile' command in the help file, which would be perfect, if i could only get it to work. im guessing the problem is the expression, which would be the active workbook, but' ActiveWorkbook.updatefromfile' is not working. The file is on the network, remember, im guessing this is the problem. So, im also guessing i just need to get the syntax right for the filename.
View 4 Replies View RelatedI have used a code to find the character "-" and replace it with nothing ("") from several named worksheets across my workbook, which OzGrid helped me with before, and it worked fine. Now I've added the code into my module (at the bottom) it doesn't work. The rest of the code works fine, and it doesn't come up with any errors when I run it, but it just seems to ignore the 'find and replace' part of it.
Sub split1()
Dim fromSheet As Object
Set fromSheet = Worksheets(1)
Dim fromRow As Integer
Dim toRow As Integer
Dim lastRow As Integer
Dim errCount As Integer
Dim thisSectionName As String
Dim i As Integer ' loop counter
Dim rng As Range 'found range
Dim emptyCellAbove As Range
Dim rng1 As Range
Dim arng1 As String 'Address of 1st hit rng1
Dim ws(7) As String
Dim ii As Integer '2ND LOOP COUNTER
Dim iii As Integer '3rd Loop Counter
This piece of code successfully replaces a module in a range of workbooks -
Sub CopyOneModule01()
Const strModName As String = "Module1"
Dim FName As String
Dim vWbkNames As Variant
Dim lLoop As Long
vWbkNames = Array("CFADS01", "CFADS02", "CFADS03", "CFADS04")
With Workbooks("CF266") 'copies from here
FName = .Path & "code.txt"
.VBProject.VBComponents(strModName).Export FName
End With...........................
i'm tring to count how many shape in the activeworkbook are ovals like so :
View 3 Replies View Relatedi am creating an add in that will allow me to display all pivot tables in a workbook, their name, sheet location and source data in al listbox (called LBPivot) on a form (called FrmPivot)
My problem is that i am not sure how to make sure it points the focus to the activeworkbook and not the actual add in workbook?
I recorded the following macro to select all the worksheets in the Activeworkbook by clicking on the first worksheet and then hitting Shift Tab and selecting the final worksheet (thus '[Group] selecting' all worksheets in the active workbook).
Sub Macro1()
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Sheets("Sheet1").Activate
Range("A1:B2").Select
End Sub
How do you generalise the Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select if the number and names of worksheets varies from workbook to workbook?
I'm developing an excel addin using Visual Studio 2008. At the moment i'm trying to display a popup showing the value contained in cell A1. However, i'm getting a runtime error saying that xlWorkBook is null. I've been able to get this to work if i open a workbook but i want to be able to execute my code on the currently active workbook. I thought that ActiveWorkbook (also tried ThisWorkbook) would let me do this but i'm having no success.
using Excel = Microsoft.Office.Interop.Excel;
using Office = Microsoft.Office.Core;
...
...
Excel.Application xlApp;
Excel.Workbook xlWorkBook;
Excel.Worksheet xlWorkSheet;
xlApp = new Excel.ApplicationClass();
xlWorkBook = (Excel.Workbook) xlApp.ActiveWorkbook;
xlWorkSheet = (Excel.Worksheet) xlWorkBook.Worksheets.get_Item(1);
MessageBox.Show(xlWorkSheet.get_Range("A1", "A1").Value2.ToString());
I have a macro that creates and saves an XML file with a specific file name. Is there a way to modify this code in such a way that the user will be able to specify the path?
Set wb = Workbooks.Add
NewFileName = "Export For " _
& "Cust " & Customer_Data.Range("custName") _
& ", LOB " & RequestLOB _
& ", Type " & RequestType _
& ", Site " & RequestSite
On Error GoTo DoNotReplaceExistingFile
ActiveWorkbook.SaveAs Filename:=NewFileName & ".xml", FileFormat:=xlNormal, _
Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, _
CreateBackup:=False
I do not want ThisWorkBook to close prematurely whenever the specified Activeworkbook is closed without saving because there are other tasks to complete. The Workbook_BeforeClose dun seem to fix it for my case below.
Here’s my situation. I want to copy data from a range of a particular protected sheet in 5 (password-protected) workbooks of a similar format, to 5 worksheets(unprotected) in ThisWorkBook, which is the Master Workbook. The password of the protected sheet is common to the 5 workbooks. The passwords of the 5 workbooks are contained in a sheet in ThisWorkbook. After copying the data from Workbook1 ( 1 of 5), ThisWorkbook are prompted for closure, when Workbook1 is closed without saving. Responding to the prompt to save or not to save, forces ThisWorkbook or MasterWorkbook to break the For-Next loop. By setting Cancel = True in Workbook_BeforeClose, I can stop Thisworkbook from closure, but I will still break the For-Next loop. I have considered the method of copying data from a closed workbook, but I dun think VBA allows copying or referencing a closed workbook which is password protected at workbook and worksheet level.
Here’s my coding :
Sub UpdateMaster()
Dim MasterWB As Workbook
Dim TempWB As Workbook
Dim Source As String
Set MyWB = ThisWorkbook
For i = 1 to 5
Set TempWB = Workbooks.Open (Filename:=WB(i), Password:=password(i) )
TempWB.Sheets("ProtectedSheet").Unprotect Password:="SheetPasswd"
MyWB.Sheets(i).Range(XXX).Value = TempWB.Sheets("ProtectedSheet").Range(YYY)
TempWB.Close False ‘dun want to respond toclose ThisWorkbook else it breaks for-next loop
Next i
Application.Quit.
End Sub
I have a csv .txt file that I am importing into Excel, and then creating a pivot-table from that data. This results in 2 tabs within my workbook, pivot-table and data. Using the following code does everything I want it to, but when I re-open the saved .xls file I only have the pivot-table sheet. I'm specifying to save the full workbook, aren't I?!?
Sub format_bgas_flowtracer()
Dim v_excel As Excel.Application
Dim v_worksheet As Worksheet
Set v_excel = CreateObject("Excel.Application")
On Error Resume Next
Kill "c:oh_for_gods_sake_JUST_WORK_YOU_STUPID_SODDING_THING.xls"
On Error Goto 0
v_excel.Workbooks.OpenText FileName:="D:gas_flowtracker_out.txt", Origin:=xlWindows, StartRow:=1, DataType:=xlDelimited, _ ...............
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count)
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
[URL] ....
I want to sort the Inventory Checklist sheet based on Column D but it gives me nothing but references errors.
i have a workbook that has the following sheets
working sheet
job sheet
receipt of deposit letter
completion sheet
delivery note
delivery note (2)
odd
even
t&t
glass
ggf
i want to hide every sheet except the working sheet.
I have tried this but the macros bring up an error when i run the macro
my macros involve printing certain pages dependng on what button is pressed
i get an error whatever
how do i stop this
I have 25 sheets in the workbook and a combobox on the main page, The combobox references a range of 1-25 that represents the 25 hidden pages. right now i can get the sheets to unhide one at a time based on the selection e.g. combobox option 1 will unhide sheet 1 but the sheet are representing sites in a design so i need to have the option to select multiple sites in the combobox option so for example if i select 5 then sheets 1-5 should unhide. I hope I've explained that clearly.
The other question or option would be to just duplicate sheet 1 based on the combobox selection e.g. selection 5 duplicates sheet 1 5 times.
I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets
Private Sub CommandButton1_Click()
Dim Rng As Range, i As Long, r As Range, lVal, uVal
Dim DeleteCount As Double
Dim lRow As Long
Dim dr As Long
Dim dc As Long
dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1
dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1
If dr = 60001 Then ................
I need to do VBA coding. Got 12 Sheets for 12 month of Sales. Every Sheets are in same Header Format.
For Column R (Status), there's Filter Data "TRUE" and "FALSE". I have to move/copy "TRUE" item into Sheet Aging 2014.
I manage to transfer using only one Sheets using Advanced Filter VBA, failed with other Sheet.
I attached the file : Sales 2014.xlsx‎
on sheet1 I have a button I need to do the following when clicked:
(1) name the next 30 sheets based on cell values in sheet1
(2) for those 30 sheets, hide some of them based on a y/n input in sheet 1
To clarify: the worksheets do not need to be created, they already exist. They just need to be renamed and hidden based on that y/n criteria. see attachment with just 1 worksheet for clarification. So - The next 30 sheets are to be named by the following ranges (B7:B16), (B21:B30) and (B35:B44). For every product with a "n" in column C of sheet1, the worksheet for that product needs to be hidden.
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
What VBA functions to use???
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.