Limit Date Range In Calendar Control To 1 Year

Mar 31, 2007

How do I limit the user from being able to choose only 1 year after they pick the first date on the first command button?

Here is the code on a userform which has a Calendar Control ...

View 9 Replies


ADVERTISEMENT

Calculating Totals From A Date Range On A Rolling Calendar Year?

Feb 25, 2010

I have a spreadsheet that tracks “points” for hourly associates on a daily basis that totals weekly and monthly. This spreadsheet works on a rolling calendar year instead of a fiscal and I need to be able to capture the totals for periods of time by days.

For example, I would need to view how many points ‘employee x’ has from 2/25/09 through 2/25/10. I have attached the spreadsheet, which includes tabs for each week ending and a summary page.

View 4 Replies View Related

Calendar Control Vba Not To Go Past One Year

Mar 22, 2007

I have the following code in my calendar initialize: ....

View 9 Replies View Related

Calendar Control 11: Selected On The Calendar Is Greater Than 12 The Date Is Entered Correctly Onto The Sheet

Jan 8, 2010

I have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.

Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.

If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????

View 4 Replies View Related

Excel 2007 Calendar Control - Select Date From Calendar In A Field

Dec 24, 2009

Using Excel 2007 Calendar Control:

I want to select a date of choice from a calendar in a field within an Excel spreadsheet.

I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.

This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.

Developer
Insert
More Controls
Calendar Control 12.0

View 9 Replies View Related

Go To Date Chosen From Calendar Control

Aug 18, 2009

Is there a way to calculate a conditional minimum? I have a range of 1000+ values and I need to find the minimum, but the minimum has to be greater than a specified minimum threshold

View 2 Replies View Related

Get Date From Week Number And Year ( Fiscal Calendar)

Jan 22, 2013

I'm having a data only pull week number and year. We are using Fiscal calendar starting in July. For example, A1 = Week number and A2= Year. How to set up a formula to retrieve a date for this? If A1 = 2 , A2 = 2013, the date will be 07/14/2012. I want the date pull of on Saturday every week.

View 6 Replies View Related

Determine If Calendar Control Date Is Between 2 Dates

Apr 15, 2008

I have a user form that has a calendar button. Once clicked it updates a txtbox on my user form. What I would also like is for another txtbox (txtQtrLeave) to be auto populated based on this entry. Below is the code I've tried:

If CalendarEnd.Calendar1.Value > #3/31/2008# And CalendarEnd.Calendar1.Value < #1/6/2008# Then
Qtr = 1
frmAddClient.txtQtrLeave.Value = Qtr

... Qtr 2, 3 etc

It seems to return a value if I have one criteria but it doesn't work once I add the And element. What am I doing wrong (this has been driving me mad all morning)?

View 2 Replies View Related

Calendar Control On Excel Worksheet - Default Start Date

Jul 9, 2012

I have set up a calendar control on a userform and got it to pop up when selecting one of 3 cells on a worksheet. The various bits of code making this work are below.

This code is attached to the Userform.

VB:
Private Sub Calendar1_Click()
With ActiveCell
.Value = Calendar1.Value

[Code]....

What I am struggling with is that I'd like to have the calendar that pops up in cell C18 (which is Date of Birth) default to starting on 1st January 1987 not todays date. Also, if there is a value in either of the 3 cells that use the calendar, then I'd like the calendar to display that date. If the cell is empty then todays date is fine for cells G3 and G26.

View 7 Replies View Related

Pass Calendar Control Date To Selected TextBox On Another UserForm

May 9, 2008

I have a workbook that has multiple spreadsheets. Data is added to the spreadsheets using userforms for each spreadsheet. I have created a pop-up calendar to add dates and want to know if there is a way to add dates without having to create multiple calendars for each txt field on each userform. I would like it so that when I click on the calendar it would put the date into the text field it was launched from.

This is the code in the calendar which only puts the date into the field named Dat_Clsd.

Private Sub CMD_Close_Click() .....

View 5 Replies View Related

Pop Up Calendar In Userform - Need To Limit Entry

Sep 26, 2011

I have a userform with two pop up calendars (calendar1 and calendar2). Calendar1 is the "start date" and must be a Monday. I have this portion working fine. If they select a date other than a Monday an alert message will pop up notifying the user a Monday must be selected. I need to limit the user to a date selection in calendar2 to be a minimum of three years out from Calendar1. I would like an alert message to pop up in Calendar2 should the user select a date inside of my three year minimum. Am I even in the ballpark with the following:

If Trim(Calendar2.Value) < (Calendar1.Value + "not sure here") Then
Calendar2.SetFocus
MsgBox "Select End Date 3 Years Out From Start date", vbExclamation

View 5 Replies View Related

Formula To Indicate Date Range On A Calendar

May 7, 2008

I have attached a file which indicates what I am trying to achieve.
The first question is can this be done and then who do I set it u

View 12 Replies View Related

Populate Calendar If Date In Associated Cell Show Date On Calendar

Apr 4, 2013

I currently have a worksheet that when a user clicks on the cell, a calendar form opens. From here they can select a date, click ok, and the date gets placed in the corresponding cell they clicked on.

Now if the user needs to change that date, i want them to be able to click on the cell again, and when the calendar opens, the date in the cell would be selected on the calendar. I was able to do this in a userform, but im not sure how to edit it to work on the worksheet. I am using the below to populate the calendar.

Code:
private sub worksheet_selectionchange(byval target as range)
if not intersect(target,range("aa16:aa24")) is nothing then .show calendar
When the user clicks the date, the below code places it in the cell.

Code:
private sub ok_click()
with active cell
.value=calendar1.value
end with
unload me
end sub

Now the below code was used when I was using a userform, but im not sure how to edit this to pull the date from the active cell.

Code:
privatesub userform_activate()
me.calendar1=date
if not tb is nothing then
if isdate(tb.value)then me.calendar1.value = tb.value
end if
end sub

View 1 Replies View Related

Calendar To Financial Year

Jun 14, 2013

I have a report at the moment which shows me the calendar year that an action was carried out in, what I would also like to show is which of our financial years (they run April to March) the action was carried out in.

View 7 Replies View Related

Better Calendar Control

May 20, 2009

I'm trying to make it so that when a user clicks on a certain cell, a calendar pops up so they can pick a date. This seems like a pretty common thing to want; I hope Microsoft puts it into the next release.

Anyway, I've read the tutorial found at [url]which tells you how to create a userform, add the calendar control to it, etc.

I've also modified it so that the calendar comes up when the user clicks on a certain cell, and so that the form closes when they choose a date.

I had to use the selection_changed subroutine to tell if someone clicked on the cell, but there are some flaws.

First, moving over to the cell with the keyboard arrows brings up the calendar (undesired result; I only want it to come up with clicking)

Second, if the cell is already selected, clicking it doesn't bring up the calendar since the selection didn't change (also undesired; I would like the form to come up whether the cell was previously selected or not).

View 12 Replies View Related

SUM Range If Date Is In Same Month And Year?

Aug 15, 2014

I have a table with columns 'Date', 'Account', 'Sales'.

I need a formula that will give me the given sales for a certain month, for a certain account.

Ive tried various SUMIFS '=SUMIF(Table1[Billing Month],(MONTH(A191)&YEAR(A191) = MONTH(Table1[Billing Month])&YEAR(Table1[Billing Month])),Table1[Net Invoice Value])'

Ive looked at Arrays =SUM(IF(MONTH($A$2:$A$6)=1,$B$2:$B$6,0))

View 1 Replies View Related

Sorting Months By Calendar Year

Jan 15, 2013

I have just finished sorting my anniversary list by Month (in alpha order)

B C D E F
1 Hire Date MonthDay YearLast Name First Name
2 04/04/2011April 042011Emp 1
3 04/09/1996April 091996Emp 2
4 08/02/2012August022012Emp 3
5 08/09/2004August092004Emp 4
6 08/13/2001August132001Emp 5
7 08/16/2010August162010Emp 6

Is there a way to sort by Calendar year? Jan, Feb, Mar, etc.

View 2 Replies View Related

Averaging Each Calendar Day Of A Five Year Data

Jan 13, 2009

I want to find the average value for each Jan 1st, 2nd, 3rd ..., for a data set of five years. How do I do this quickly? I can filter, but would have to do that 365 times and involves a lot of pasting. I tried a pivot table, but basically came down to the same problem, although I don't understand pivot tables that well.

View 9 Replies View Related

Find Date Chosen From Calendar & Copy Range And Paste As Values

May 23, 2009

I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM

Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.

View 2 Replies View Related

Calendar Control On Click

Apr 21, 2008

I want to be able to show a calendar control, have the user select a date, and then fill a cell with that date. The range I would want the calendar to appear is B2:B100.

View 9 Replies View Related

Calendar Control Not Installed!

Dec 8, 2006

I got a file from someone that uses a Calendar Control in a user form, but my machine does not seem to have it installed, and Excel removes the control. I have Excel 2003 with SP2. I use the same version on my home machine but it does have Calendar Control, and the file works fine there. I tried copying the MSCC.* files from the OFFICE11 directory from home to this machine. Is there some straightforward way to install that control?

View 3 Replies View Related

SUMIF With Year As Criteria And Date As Range?

Apr 2, 2014

I am trying to do a sumif off all dates that fall into a specific year. I know I can do it by either adding a column in either of the sources to get the translated data but I was wondering if I can get this to work by it recognizing the format within the formula only.

View 4 Replies View Related

Changing The Year In Date Range From Another Cell

Feb 22, 2007

I am trying to change the year of a date range I search from.

I have a selection of dates, I use sumproduct on a seperate page to calculate the number of entries between two dates entered in seperate cells

=SUMPRODUCT((HFRA!B4:B2000>=Summary!B1)*(HFRA!B4:B2000<=Summary!B2))

Cell B1 conatins the date 01/01/2007, and cell B2 contains the date 31/01/2007. I repeat this for every month of the year.

I want to be able to change the year of these dates in B1 and B2 from a seperate cell on another page.. so I can change the search ranges to 2008 without going into each cell and changing it manually.

View 9 Replies View Related

VBA Calendar Control Without Control

Mar 12, 2003

Has anyone out their ever seen an Calendar type of control totally built in an Excel vba UserForm?

My problem that I’ve tried to resolve for some time is utilizing some type of pop-up calendar to eliminate format issues in my published Excel forms. I have tried a number of calendar controls but all have to be registered on the local machine and this cannot be guarantied for every machine.

If someone could direct me to a vba UserForm that has this built in that might do the trick. Or is their another way to deal with this?

View 9 Replies View Related

Make Calendar That Can Change Year In Text Box?

Jun 27, 2014

I' using 2007 I'm trying to make a calendar that you can change the year in a text box e.g. 2014 - 2015 and it will change the date and days in the calender rather than having to do it manually.

Is there a way to make this formula refer to a cell rather than having the specific year in there?

=TEXT(WEEKDAY(DATE(2014,1,15),1),"aaa")

View 2 Replies View Related

Calendar From Formula :: Nth Day Of Week For A Month And Year

Oct 12, 2008

I'm using this formula from

[url]

Nth Day Of Week For A Month And Year

This formula will return will return the date of Nth day-of-week for a given month and year. For example, it will return 26-March-98 for the 4th Thursday of March, 1998. Days-of-week range from 1 to 7, with Sunday = 1 and Saturday = 7.

=DATE(Yr,Mon,1+((Nth-(DoW>=WEEKDAY(DATE(Yr,Mon,1))))*7)+
(DoW-WEEKDAY(DATE(Yr,Mon,1))))

Where Yr, Mon, Nth, and DoW are cell references or values indicating Year, Month, Nth, and Day-Of-Week.

I would like to be able to change the year and month in A2 and B2 and have the calendar change.

I will be inserting rows between the weeks to return appts, if I can get this part working.

I could make a new tab for each month, but I thought I would give this a try....

View 9 Replies View Related

VBA Calendar Control Does Not Show Day Numbers

Jul 23, 2008

Over in the following thread

[url]

you can see we've hit a problem with the Calendar Control object.

I submitted a workbook which has an Activex calendar control embedded on a User Form. On my PC everything appears as you'd expect, with the calendar showing the individual days in the calendar matrix. However when the user loads the form on their system, although they see the calendar as you'd expect, and they can change the month & year at the top of the calendar, they don't see the individual day numbers, 1,2,3 etc. within the body of the calendar.

View 9 Replies View Related

Active X Calendar Control And Password

May 21, 2009

Having created a spreadsheet with active x calendar control I find that if the worksheet is password protected I'm unable to use the control to enter a date. Take the password off and it works fine. Is there a way around this??
The password for the attached example is "date"

View 4 Replies View Related

Limiting Calendar Control Dates

Jan 3, 2012

I have a spreadsheet that will always have the dates needed in cells H40 and H42. I would like the calendar to utilize the data validation in the cell to only allow someone to choose a date that is between the dates in H40 and H42.

Code:
Private Sub Calendar1_Click()
'ActiveSheet.Unprotect Password:="pbrmeasap"
ActiveCell.Value = CDbl(Calendar1.Value)
ActiveCell.NumberFormat = "mm/dd/yyyy"
ActiveCell.Select
Calendar1.Visible = False

[Code] ...

Could I add this code anywhere to make it work?

Code:
Sub DataValidation()
With Selection.Validation
.Delete
.Add Type:=xlValidateDate, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=$H$40", Formula2:="=$H$42"

[Code] ......

View 4 Replies View Related

USE Calendar Control 10.0 Object In Worksheets

Jul 19, 2006

I'm trying to use the Calendar Control 10.0 object in one of my worksheets. I basically want to be able to display a value by clicking on one of the dates in the calendar. Example: Say I want the contents of cell A1 to be displayed in B1 when somebody clicks on the 17th of February 2006. Is there any way to do this?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved