I know the COMBIN function, i want to list all combinations from a given set of cells (numbers), each item of the combination - in separate cell. Example:

1 2 3 4 5 a b 6 ....

after combin (x,3) i want to list me this: 123........but each number must be in separate cell (1-one cell, 2 -one cell, 3 -one cell)

I have ten numbers (i.e. 1,2,3,4,5,6,7,8,9,10) and I'm trying to figure out how to make Excel generate a list of all the combinations possible for these 10 numbers. I'm trying to avoid using a VBA script. Is it possible to accomplish this task only using a function formula? This way I will have the ability to tweak the formula and test different qauntities of numbers (i.e. 1,2,3,4,5,6,7 or 44,56,77,33). Is getting a list of all possible combinations to output on a single column with commas between numbers possible with a formula?

I am trying to write VBA code that will list all possible combinations of data contained in a worksheet based on a few conditions. I have a list that varies in length. In the first column is a list of numbers denoting a particular course number. In the second column is a list of numbers denoting the specific class number for the course. As an example, I have a 6 courses. The first course has 1 class, the second course has 3 classes, the third has 11, the fourth has 3, the fifth has 7, and the sixth has 6. Thus, my columns look like this:

A B 1 1 2 1 2 2 2 3 3 1 3 2 3 3 3 4 3 5 ...

I need to list out all possible combinations of classes given that I must have all six courses. EXAMPLE (Course, Class):.......................

I need to be able to create a list of all combinations (where position doesn't matter, therefore its not a permutation) of a list of numbers with repetition enabled. I need to provide anywhere up to at least 10-15 numbers if possible and they are integers normally between 1 and 72. Example: (for numbers 1, 2, 3)

Am looking for an easy way to produce a list of combinations (maximum 6 numbers) from a range of numbers listed in 6 different columns:

Example Column A contains : 1,2,3 Column B contains : 7,8,11,15 Column C contains : 12,16,18,19 Column D contains : 17,30,31 Column E contains : 30,31,32,33,34 Column F contains : 37,39,40 The rules are:

In each combination of 6 numbers, numbers should always be taken from ALL 6 columns. In each combination, numbers cannot repeat.

How to generate a list of numbers of this function in Excel: COMBIN(20,3), but i want the combinations of numbers. I want to create a list of 20 questions and every question has 3 answer. I think that are 1140 combinations.

An example will be as follows. List all possible outcomes for 3 matches. That will be 27 possible outcomes.

I would like results for my request of 50 matches to be displayed as follows.

HHH HHD HHA HDH HDD HDA

[Code] ...........

Where: H=HOME D=DRAW A=AWAY

Is there a way i can have the possible outcomes listed as above for the outcomes of 50 football matches? I do know that the outcomes will be hundreds of millions if not billions.

I have 7 cells containing strings but not numbers on a row.

Now I want to list out all the combinations of drawing out 3 cells out of these 7 cells while the remaining cells that haven't been drawn out could also be listed out one column next to the drawn cells.

For example, I got 7 cells like this.

A B C D E F G (each letter in ONE cell)

And I want to list out all the combinations like this:

ABC DEFG ABD CEFG ABE CDFG ABF CDEG

etc.

For more details, please refer to the attached sample (an .xls file being zipped).

I have a single rangle of numbers in Column A, and in Columns B and C and want to list all possible combinations of these numbers. If there is a possible solution without using a Macro I would perfer that, but if not I'll take what I can get.

I have a list in excel with ten values, but I need to get all combinations possible, picking 4 of 10 each combination. This must be as a combination and no permutation or variations either, I mean, values can't be repeated in a single combination.

I'm struggling to do this in a Macro but I don't get it.

I coordinate access requests for several contracts, and I have to list the approved accesses in a list where each line represents one person and one contract. For each access request, there will be an arbitrary number of persons obtaining access to an arbitrary number of contracts.

The input would then be as follows: Joe A and Jill B request access to contracts 1001, 1002 and 1003 ->

Joe A 1001 Joe A 1002 Joe A 1003 Jill B 1001 Jill B 1002 Jill B 1003

To automate this task, I have made a simple macro for generating a combination list of all persons having obtained access to a selection of contracts.

My macro worked well when I only wanted to list unique and independent list items, but now I have been asked to include each person's email address. How I can change my code so that only one email address is copied into my list for each person?

Code: Sub AccessList() Sheets("requests").Select Dim rng As Range, c As Range Dim rng1 As Range, c1 As Range Dim rng2 As Range, c2 As Range

I'm looking for a formula that can sum the first character of a list of values together, based on the cagegory.

Example below:

Column A = The category (or name of a person) Column B = The status, I'm interested in the first character of the status (which is always a number) Column C = The sum of the status based on the first character of the status for that specific person

James 1.0 Not Started 8

James 1.1 Not Ready 8

[Code] .....

I want to do this without adding another column (i.e. I can get the result adding a column with formula "=value(left(B2,1))", but I don't want to add the extra column)

I'd also prefer to avoid doing this with a macro, as this part of the formula is only a smaller part in a larger formula.

I tried to look for an entry in this forum, but couldn't find one that matches what I need.

When I run this code it does the exact opposite of what I want it do (if not contained in that character list then delete). So basically if it not in the character list then delete, but it if is in the character list it deletes....

I need to create a list of all possible permetations of all 26 alpha characters when put into a 3 character string. EG: AAA, AAB, AAC, through to ZZZ. Is this something that can be done in excel/vba?

I've created a user form that has a list box populated with a fairly standardized format - a product ID or model number followed by a dash ( - ) then followed by a description. Based on the users selection of an item in the listbox, certain rows will be copied over from another tab in the excel file.

An error occurs when a Model Number list box item is selected but not when a product ID is selected.

The difference between the two are AlphaNumeric vs only numeric.

I'm creating an excel spreadsheet that will be sent out to a few users to enter data into. In this spreadsheet, multiple columns contain drop down lists created using the Data Validation tool. The lists are referencing named ranges on a second worksheet.

In these drop down lists are terms that consists of one or two words. What I'm trying to do is when a user goes to select an option from the drop down list, I want the matching one letter code to be entered into the cell instead. For example, Column AK has drop down list with following options:

Good Moderate Poor

When a user selects one of the options, I want one the following respective letter to appear instead......

Some of the lists will have up to 200 lines in them and I'd like to find a way to simply to jump to the first letter entered in the data validation cell.

Does the list need to be alphabetized?

Could it be something that is entered into the data validation box? This spreadsheet has data validation in 35 columns.

I have got a list of numeric abbreviations, for instance 10739011/21/31/41. What it should really display are the numbers 10739011, 10739021, 10739031 and 10739041 (the first six figures stay the same). All the numbers in my list are 8 figures long. I want to change the list from the list seperated by the backward slash to the complete numbers. I have uploaded an example of the list with backward slash between the numbers. Is there a way that Excel can automatically change these numbers to the full numbers?

Because all the numbers are 8 figures long, I thought the first 6 figures of the 1st number can be copied and those 6 figures pasted before the other two figures after the backslash. Auto Merged Post Until 24 Hrs Passes;sorry, pressed OK too quickly. The problem is that there are sometimes 4 numbers in the cell, sometimes 6 and once three. I would like Excel to complete all the numbers in the cell and then move on to the cell underneath it and so on. Also, I would like each number to have it's own cell.

I have a cell which will contain SER01+SER02+SER03

and what i need it to contain is [SER01]+[SER02]+[SER03]

and shocker is i've got this to work for the first instance but not the other two

code as below... be grateful for your help

Sub measure1() Dim list As String, pos As Integer, refl As String, refr As String, newlist As String list = Cells(1472, 16).Value pos = InStr(list, "+") refl = Left(list, pos - 1) refr = Right(list, pos + 1) newlist = "[" & refl & "]" Cells(1472, 17) = newlist End Sub

Need a formula/code that will determine what the corrected part number should be (insert dashes if they are missing) by comparing to other values in the list.

I have a column of transactions lets say 500 or so, of irregular numbers such as 257,273.80 (not something ou can add up in your head...). I know that of those 500 transactions a handful of them have a sum of lets say 2,877,000.00, which I know. Now I need to find all possible combinations of values in this column that equal a sum I enter.

I've attached an Excel..Its a small 4X4 matrix with numbers filled inside...Next to the right is a Combinations Column..I want to know how can i use just forumla to optain 4digit combination based on the 4X4 matrix. Rule is only numbers from the 4X4 be used.

I have up to 30 cells each with an integral value from 1 to 5. The task is to list all the ways that selections of from 1 to 5 cells can be made from the list such that the value of the sum of the selection is 5. It will usually be the case that there will be a final selection that will not sum to 5 and this needs listing also.

I am aware of coding that can list out combinations, but not in a form that can be adapted to deal with the summing limitation. I hope that I will be able to code so that I can deal with different numbers of cells and different sum values.

I have a table with 3 columns and n number of rows looking like this: A1 A2 A3 B1 B2 B3 C1 C2 C3 D1 D2 D3 ...

I need to create a macro that gives all the sum combinations like this: A1+B1+C1+D1 A1+B1+C1+D2 A1+B1+C1+D3 A1+B1+C2+D1 A1+B1+C2+D2 A1+B1+C2+D3 A1+B1+C3+D1 A1+B1+C3+D2 A1+B1+C3+D3 A1+B2+C1+D1 A1+B2+C1+D2 A1+B2+C1+D3 ...

I have a simple list of names with associated numerical values.

I would like to create a formula that will produce a series of all possible series of 8 of those names whose combined numerical values are at or below a certain threshold (or between two thresholds, if that's easy). Bonus points if the total combined value for each group is easily shown, but that'd just be gravy.

I want to see how much combinations are possible when i got 6 numbers..

-- got this numbers 1--2--3--4--5--6 -- want to calculate how much combinations of ( 2 ) numbers possible -- want to calculate how much of ( 3 ) numbers possible -- want to calculate how much of ( 4 ) numbers possible -- want to calculate how much of ( 5) numbers possible

-- never 2 same numbers together (2-2) or (2-2-3) or (2-2-3-4) may not be in list

-- How can i make the result visible in kind of list ?

I would be nice if somebody knows a good solution..

i'm doing a process and in column N, i would need to have the following combinations:

A1 A2 C1 C2 H1 I1

so basically, a formula that would figure out the combinations available! can this be done using a formula?

******** ******************** ************************************************************************>Microsoft Excel - Cost Calculator---V5---Try.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutK39= KLMN39A12 40B 41C12 42D 43E 44F 45G 46H11 47I11 48J Cost Calculator [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

I have a list of numbers from 1 to 20 form a2 to a21, what I would like to do if possible if figure out many combinations of 5 there are for these numbers, and then second if possible display the combinations.

E.g. say there was a total 250000 combinations then show those 250000

I want to have a sheet with all the previous drawings for the florida lottery. Then I want excel to ask me how many numbers do I wish to play.

Then when I say 12 (for example) it would pick 12 numbers from 1 to 53 and match all possible comibinations of thoses numbers to the the previous drawings and tell me wich 12 number combination would have won more times then others. So it would need to compare each possible 12 nmber combination to each other and see wich one won more 6outof6, 5outof5, 4outof4, and 3outof3. Then give me the one with the highest winings

I have a table: VOICEDATAIPADSLCustomer 1YESCustomer 2YESYESCustomer 3YESYESCustomer 4YESYES

And i need to count all possible combinatins. Result could be as:

Custome who use Voice also use combination:1VOICE ADSLCustome who use Data also use combination:1DATAIP2DATAADSLCustome who use IP also use combination:1IPDATACustome who use ADSL also use combination:1ADSLDATA

Now there is the number and the number(A) that it value it represents (B). This is what I want. I want to see all possible number combinations between the upper and lower A columns listed veritcally under the whole set, with out duplicating any numbers and with the upper numbers only being in the 1st position and the lower numbers being in the second position Ex( 4-1, 4-8, 4-2, 7-4, 7-1, ect, ect (listed vertically). Now in column B under, right beside each possible combination I want to see the result of the two values multiplied (ex. beside 4-1 I would like to see 0.1)

So below that mess listed above I want to see something like this

A B 4-1 0.1 4-8 0.0125 ect ect ect

I want to be able to swith the values around and have it automatically make the correction.