ListBox Transfer Code
Mar 5, 2010
I'm using this code to add items to another listbox, based on selections in the first listbox.
It's supposed to also remove the item from the original list (to prevent duplication), but causes an error on the 'removeitem' line. Anyone know why it would do this?
Also, is there a better way of doing this for a multi-select listbox?
Private Sub AddSingle_Click()
Dim iIndex
With ListBox1
For x = 1 To ListBox1.ListCount - 1
iIndex = ListBox1.ListIndex
ListBox2.AddItem .List(iIndex, 0)
ListBox1.RemoveItem .List(iIndex, 0)
Next
End With
View 9 Replies
ADVERTISEMENT
Apr 4, 2014
im trying to create a two column listbox that will transfer both columns to the listbox on the right and also transfer from the right to left currently right to left works but when I trasnfer from the left to right then the right to left only one column is moved.
View 4 Replies
View Related
Dec 7, 2007
I cannot find this information anywhere else in this forum...
Does anybody know how to transfer an item from one list box to another using code, on the click of a button.
The list box with the information in is called 'Team_ListBox'The list box i am wanting to transfer to is called 'Starting_Team_ListBox'The button to do this task is called 'AddPlayer_team_Btn'
View 3 Replies
View Related
Jan 30, 2007
I have a multiselect list box in a userform and need to transfer all the selected items in the list to Sheet2 Column D starting in the first empty cell.
I am using the following
Private Sub CommandButton1_Click()
Dim iListCount As Integer
Dim iRow As Integer
Dim rStartCell As Range
Set rStartCell = Sheet2.Range("D65536").End(xlUp).Offset(1, 0)
For iListCount = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(iListCount) = True Then
ListBox1.Selected(iListCount) = False
iRow = iRow + 1
rStartCell.Cells(iRow, 1).Value = _
ListBox1.List(iListCount, 0)
End If
Next iListCount
Set rStartCell = Nothing
End Sub
My problem is that this is transfering just the first selected item from the listbox to the first empty cell in Sheet2 column D but the rest of the selections are not transfered.
View 7 Replies
View Related
Dec 1, 2009
I have a activex multi-selection list box (on a worksheet). It has two columns, referenced from two columns on the worksheet (state abbreviation, state code) AA7:AB58. I'm using the following code below to transfer selections to cell A1.
View 3 Replies
View Related
Oct 8, 2006
ListBox Transfer
I have created a Listbox with 300 products in it - The user can only select a maximum of 10 of them - these 10 products then need to be transferred to another worksheet beginning at the range B13 and ending a B22, Once these have been transferred the product number (eg 1 = Meadowmin 12) is then linked to a vlookup allowing further information of that particular product to be displayed.The vlookup is working
I have tried to use the Ozgrid sample (ListBox Transfer,xls) - works until the range B13, but does not continue to put the other 9 products below my first choice.
This is currently the code I am trying to work on. It keeps on counting 13 rows and then adding the product, it must count only to first 13 rows and thereafter remaining product below one another (max of 10)
Private Sub CommandButton1_Click()
Dim iListCount As Integer, iColCount As Integer
Dim iRow As Integer
Dim rStartCell As Range
View 9 Replies
View Related
Mar 18, 2008
I am trying to create a data entry form with a text field and a listbox. The list box is populated by another sheet and the text box will be used to enter names. I need to be able to enter a new name, select multiple options from the list box and then click a button to add this info to a sheet in excel.
I have read about changing the list options to allow this etc - the problem is I can't get the results to go back into excel - all I get is a name with nothing from the listbox.
View 4 Replies
View Related
May 6, 2009
I want to select items in a listbox and transfer those items via command button in a textbox. The listbox is already filled. I have no idea how to realize that.
Attached is the form I created so far. I copied everything together and matched it up for me. It's probably not the best way but it works. I marked the section where I need help in yellow.
View 9 Replies
View Related
Dec 22, 2009
i need your help by a code to transfer the data mentioned in ( main ) sheet ( in attached file ) to the ( 8 agents ) sheets which addressed (A,B,C,D,E,F,G,H) ( in same cells for easy using the code ).
View 10 Replies
View Related
Apr 17, 2006
We have a worksheet entitled 'Data Output' that has the raw data in column B. The data represents temporary input from another worksheet that serves as an intake form. Each person's intake data will temporarily populate column B of the Data Output worksheet. When each intake is complete, I want Excel to take the data in Column B and find the next available empty column in a worksheet called 'database page 1' and populate it with the data starting at row 3 downward. When the last column in database page 1 worksheet is reached, I need for Excel to go to 'database page 2' worksheet and begin populating the next empty column and so on.
Is there anyone within your forum or group that can help me write the VBA code for this and briefly tell me where in Excel to insert the code. I know formulas basically well, but have never used VBA.
View 5 Replies
View Related
Feb 11, 2014
I am currently in the process of creating a manifest system.
I have two sheets I use (DELIVERY MANIFEST & COLLECTION MANIFEST)
What I would like to happen is, when I input information onto one fo these sheets and click the Macro button to send an email, that selected information gets automatically transferred onto the first blank row on another sheet (TRANSPORT SHEET)
The data I want to transfer is:
Manifest----LIST
J8 A1
F6 B1
G19 C1
J6 D1
H11 E1
C9:19 F1
E9:19 G1
J15 H1
For Column J on the spreadsheet I require the name of whoever input the data ( name of excel user)
COLLECTION MANIFEST.xlsm
DELIVERY MANIFEST.xlsm
TRANSPORT LIST.xlsm
View 1 Replies
View Related
Jul 17, 2014
I'm trying to get certain Excel cells (varies by column and row) to populate different areas in a Word document. I've tried using both Word bookmarks and form fields and have defined the Excel names with the Word bookmark names as well as using Word's generic terms (Field1, Field2, etc.) with no luck. The VBA code I'm using now is for word forms and will open the Word document but seems to delete the form fields. I don't know if I'm not coding the cells correctly or what.
Sub CreateProposal()
Dim wdApp As Word.Application
Dim wdDoc As Word.Document
Set wdApp = CreateObject("Word.Application")
' Open word document
[Code] ........
View 3 Replies
View Related
Sep 15, 2008
I have been given the following code to transfer data from multiple workbooks within folders and subfolders to retreive the same line of data from each of the workbooks and place them in a master workbook.
the folders are set up as follows,
there is a main folder, (a yearly folder)
within this are 12 monthly folders (named January to December)
within these are four weekly folders (named week 1 -week 4)
contained within these weekly folders are the workbooks that i wish to copy data from.
for example a1 - k1
the code i am using transfers the file names but comes up with #REF! instead of transfering the data
Here is the
View 9 Replies
View Related
Mar 14, 2014
code the following on a userform initialize event to populate a list box: If the selected item in the list box SerialNumber = "none" (lower or upper case) then populate the list box lbSamDesc with all the unique entries on the sheet "EquipmentData" in Column C (from C3 on to last entry in C), where the corresponding B cell next to it is blank.
View 14 Replies
View Related
Dec 8, 2008
I'm trying to assign a list box to a variable using Set statement, but getting an error.
View 8 Replies
View Related
Feb 28, 2007
how the code to make a listbox.. The code I have in Excel VB is as shows... I want the function_code to be shown as a listbox!
Sub Get_Category()
resrow = 3 'börjar vid cell 3,2
rescol = 2
Sheets("sheet1").Range("b2:j1000").ClearContents
OpenConnection ("RFC")
View 9 Replies
View Related
Feb 17, 2014
Im trying to sort items in two list boxes on a userform. I found some customizable sorting code online here:
[URL]....
But I'm not having any success with it.
I copied the 'Sub SortListBox' code and added it to the bottom of the Code for the Userform.
I then added the following lines to the Userform Initialize procedure:
Run "SortListBox", lbUnitList, 0, 1, 1
Run "SortListBox", lbPOList, 0, 2, 1
This should Sort lbUnitList Alphabetically by Column 1, and sort lbPOList Numerically by Column 1.
However as soon as I add those lines to the Initialize procedure it prevents the userform from opening. No Error message is displayed, it just won't load.
I have attached my workbook. The Userform is called ActiveEquipment.
View 2 Replies
View Related
Nov 14, 2008
I'm playing with simple UserForms to get the hang of VBA. I was trying an example for the help files (Using xl2K), and this isn't working. My first challenge was figuring out that I needed to 'create' a UserForm to begin with.
View 2 Replies
View Related
Oct 13, 2009
Is possible to populate the headings of a listbox via code
I have a list box with three columns and need the headings to be
"Number" "Rider" and "Bike"
View 5 Replies
View Related
Jul 31, 2013
I need a code to hide and unhide 6 Active=X Listboxes on sheet 2.
I need to link this to a Active=X Commandbutton.Can the commandbutton caption say hide/Unhide listboxes when selected.
View 3 Replies
View Related
Sep 30, 2013
I have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
View 2 Replies
View Related
Jun 16, 2006
Why this code doesn´t enter in the if condition when i don't select any item from the listbox
semana = ListBox1.Value
If semana = Null Then
MsgBox ("Need to choose one item!!!")
Else
emd = Range("A48").Value
End If
View 3 Replies
View Related
Aug 18, 2006
I think this should be simple to answer. I have a userform that has multiple listboxes on it. When the user makes a selection in Listbox1 it highlights the item selected then when the user makes a selection in Listbox2 it highlights that next item and the selection in listbox1 remains highlighted. What I want is to deselect the selection in Listbox1 when Listbox2 is selected. I have tried things like below:
Sub Listbox2_Click ()
Me.Listbox1.Deselect
End Sub
View 2 Replies
View Related
Jun 4, 2014
I have a 2 column listbox storing Policy Number and Number of pages. Suppose it has 10 records. Now I want the code so that when I double click on a particular policy number of the listbox then I should be able to make the changes in that. (it might be changing the ppolicy number or number of pages if the user types something wrong by mistake)
View 1 Replies
View Related
Mar 21, 2012
the following code has been devised to populate a userform listbox ("listbox1") with seven select columns (F,H,K,L,N,O) of filtered rows of a worksheet ("Data")
Code:
Sub AddMultipleColumn()
Dim rngCell As Range
Dim wks As Worksheet
[Code]...
Regrettably, there is something amuck that is preventing it from providing the expected results. Seems as though this code wishes to process all the rows, instead of just those revealed from the filter. The routine runs indefinately, and will ultimately lock up Excel and never revealing any information. On a random stop, rngCell value far exceeded the (what I felt) to be the preferred max of 28 ... the number of rows of the filter. This routine is called from within the userform's initialization code.
Question 1 ... those that are able to shed light on the flaw ...
Question 2 ... data starts on row 6 of ther database, with rows 1-5 being header. What needs to be done, if anything, to reflect this?
And question 3 ... if the worksheet "Data" were in a second workbook , would be as simple as changing this ... Set wks = workbooks("workbook2.xls").Worksheets("Data")
View 9 Replies
View Related
Mar 22, 2014
If Sheets ("Sheet1").Cells (i ,"D").Value="January" Then ...this is my code line.I would like to replace my criteria"January" with a listbox or combobox with months names so that my out put results vary according to my list selection from the combobox., so that I need not to change or edit my criteria value every time according to my requirement.Is it possible in vba?
View 4 Replies
View Related
Nov 26, 2008
I have a list of customers in listbox1 (the text values of which come from a spreadsheet), that I want to refine as I type in textbox1. I'm not sure if it's possilbe, but I would like it to work similar to the itunes search (if you're familiar with it) where it searchs for any occurance of the text within the list as opposed to just searching for the letters at the beginning of the word.
View 9 Replies
View Related
Sep 20, 2006
I have a ComboBox(mnthComboBox) on a userform. I would like to populate the RowSource using VBA Code. I have searched this forum but have been unable to find what I need.
View 4 Replies
View Related
Dec 1, 2013
I am trying to populate a list box in a user form and have started to write the below code but seems not to work.
Code:
Private Sub CommandButton1_Click()
Crit = Range.TextBox1
If Cells(Rows.Count, 1).End(x1up).Row = 1 Then
LR = 2
Else
LR = Cells(Rows.Count, 1).End(x1up).Row
[Code] ........
View 3 Replies
View Related
Jun 5, 2014
I have some code for changing the scale of my chart axes so that when new data is inserted into the column which the chart sources from (say column B), the axis scales on my chart will automatically adjust (as the Excel algorithm sometimes leads to charts which are a bit squashed). This code works fine, and I have included it below.
I have then tried to introduce an ActiveX listbox so that when you select an item in the box, the reference number generated (1,2,3...etc) then determines which data series is inserted into column B using a vlookup function. However, when I do this, the original VBA code for automatically adjusting the chart axes no longer works.
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
With ActiveSheet.ChartObjects(1).Chart
[Code].....
View 4 Replies
View Related