Im trying to sort items in two list boxes on a userform. I found some customizable sorting code online here:
[URL]....
But I'm not having any success with it.
I copied the 'Sub SortListBox' code and added it to the bottom of the Code for the Userform.
I then added the following lines to the Userform Initialize procedure:
Run "SortListBox", lbUnitList, 0, 1, 1
Run "SortListBox", lbPOList, 0, 2, 1
This should Sort lbUnitList Alphabetically by Column 1, and sort lbPOList Numerically by Column 1.
However as soon as I add those lines to the Initialize procedure it prevents the userform from opening. No Error message is displayed, it just won't load.
I have attached my workbook. The Userform is called ActiveEquipment.
I've spent the last two days searching ozgrid and the rest of the web with only pieces of the puzzle to show for it.
How can I create a multicolumn listbox on a worksheet using VBA and what properties can I set for it? I've found different ways to create a listbox on a sheet using VBA but not with multiple columns.
I have try whole moring to make the multicolumn list in EXCEL 2003.But failed.
Could anyone have a look at the code and correct me?
In the userform,I have a combobox to select the "client",and I have a multicolumn listboxm, to display the related result for the client which is from sheet"orders" I am a beginner in the EXCEL VBA, so my code attached in the workbook might be in mess.
I've been trying (unsuccessfully) to return a value from the second column in a 4 column listbox, all I can manage to return is the numerical value for the row selected eg if I use: MsgBox listbox1.Value to try and return the result, it shows the number of the selected row in the msgbox.
I have a activex multi-selection list box (on a worksheet). It has two columns, referenced from two columns on the worksheet (state abbreviation, state code) AA7:AB58. I'm using the following code below to transfer selections to cell A1.
I have a multicolumn listbox, and a multidimensional array.
I want to put just SOME values of the array into the listbox, but I ger errors using both .list or .column to access single items, and even using .additem .
I have: dim variable(2000,2) as string variable(1,0)="aaa": variable(1,1)="bbb": variable(1,2)="ccc" variable(2,0)="www": variable(2,1)="awasd": variable(1,2)="asdfa" .... variable(2000,0)="www": variable(2000,1)="awasd": variable(2000,2)="asdfa"
I don't want to store all 2000 elements, just some ones: how can I do it?
I have a userform That has Several client information textboxes on it including a textbox called txtClientID.
What I would like to do is add a multicolumn listbox to the form and populate it from a worksheet - "sheet3" Columns B to E. These records would be filtered by the txtClientID textbox (this would correspond to a client ID value in column E).
So I would have a listbox that contained all the records from Sheet 3 that relate to the Client ID on the userform.
I have written a VB-excel program after a lot of reading on this forum. Purpose of the program is to load a number of log-files with lots of data.
I load these files in a 2 column listbox, were the 1st column is the name of the file and the second column is a number, starting with 1, 2, 3 etc.
Since I don't get the files in the order I want them to be, I created a button to change the number in the 2nd column.
Now my problem: I need to sort the listbox according to the 2nd column. I have a routine that works ok, but whenever I make a mistake like duplicate numbers in the 2nd column, I lose all the data in the listbox and can start over again.
Dim listarray(20, 2) As Variant, Log_name As String, k, i, n, m, listnum, pos, remove_num
listnum = ListBox2.ListCount
For n = 0 To listnum - 1 pos = ListBox2.List(n, 1) - 1 Log_name = ListBox2.List(n, 0) listarray(pos, 0) = Log_name listarray(pos, 1) = pos + 1 Next n.................
I am wondering if a block of code can be used rather than having to enter line by line as the following code is below? Also if the select is necessary?
I have a column of over 1000 cells with context in it. Each cell as a keyword in parathesis associated with the context. Therefore, different context are associated with the same keyword. However, the cells with the same keywords are spread out all over the 1000 cells.
Example:
cell1: anti-lock brake system (abs) cell2: baromic pressure (Baro) cell3: anti brake systematic (abs) ...
Basic solution: I need to create a vba code that would look through the 1000 cells for a specific keyword and copy all the cells having that keyword in parathesis into another spreadsheet or column, so I can look through them easily. so if i look for (abs) it will give me:
cell1: anti-lock brake system (abs) cell3: anti brake systematic (abs) ...
Ultimate solution: The VBA code would be "smart" enough to copy all 1000 cells in keywords order. It would give me all possibilities:
cell1: anti-lock brake system (abs) cell3: anti brake systematic (abs) cell2: baromic pressure(Baro) ...
code the following on a userform initialize event to populate a list box: If the selected item in the list box SerialNumber = "none" (lower or upper case) then populate the list box lbSamDesc with all the unique entries on the sheet "EquipmentData" in Column C (from C3 on to last entry in C), where the corresponding B cell next to it is blank.
I'm using this code to add items to another listbox, based on selections in the first listbox.
It's supposed to also remove the item from the original list (to prevent duplication), but causes an error on the 'removeitem' line. Anyone know why it would do this?
Also, is there a better way of doing this for a multi-select listbox?
Private Sub AddSingle_Click() Dim iIndex With ListBox1 For x = 1 To ListBox1.ListCount - 1 iIndex = ListBox1.ListIndex ListBox2.AddItem .List(iIndex, 0) ListBox1.RemoveItem .List(iIndex, 0) Next End With
I need to create a table with the top 14 'ReNo' for each code listed in columns F1-R1. These need to be in chronological order. Also if the code is part of the latest date then that first ReNo. needs to be ignored (since it will not have completed its cycle).
getting to the formula I have but I can't get it to sort in these ways, so as it is its not working right.
I'm playing with simple UserForms to get the hang of VBA. I was trying an example for the help files (Using xl2K), and this isn't working. My first challenge was figuring out that I needed to 'create' a UserForm to begin with.
I have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
I think this should be simple to answer. I have a userform that has multiple listboxes on it. When the user makes a selection in Listbox1 it highlights the item selected then when the user makes a selection in Listbox2 it highlights that next item and the selection in listbox1 remains highlighted. What I want is to deselect the selection in Listbox1 when Listbox2 is selected. I have tried things like below:
Sub Listbox2_Click () Me.Listbox1.Deselect End Sub
how I would add in code to sort the worksheets from A-Z. Also, Ideally, I would like to hide the template sheet that the new records are copied from. Is it possible to add code that would unhide the resulting worksheet once it is copied and renamed? I am learning loads from this forum, so thank you once again. Here is the code in it's current state:
I have a 2 column listbox storing Policy Number and Number of pages. Suppose it has 10 records. Now I want the code so that when I double click on a particular policy number of the listbox then I should be able to make the changes in that. (it might be changing the ppolicy number or number of pages if the user types something wrong by mistake)
the following code has been devised to populate a userform listbox ("listbox1") with seven select columns (F,H,K,L,N,O) of filtered rows of a worksheet ("Data")
Code: Sub AddMultipleColumn() Dim rngCell As Range Dim wks As Worksheet
[Code]...
Regrettably, there is something amuck that is preventing it from providing the expected results. Seems as though this code wishes to process all the rows, instead of just those revealed from the filter. The routine runs indefinately, and will ultimately lock up Excel and never revealing any information. On a random stop, rngCell value far exceeded the (what I felt) to be the preferred max of 28 ... the number of rows of the filter. This routine is called from within the userform's initialization code.
Question 1 ... those that are able to shed light on the flaw ...
Question 2 ... data starts on row 6 of ther database, with rows 1-5 being header. What needs to be done, if anything, to reflect this?
And question 3 ... if the worksheet "Data" were in a second workbook , would be as simple as changing this ... Set wks = workbooks("workbook2.xls").Worksheets("Data")
If Sheets ("Sheet1").Cells (i ,"D").Value="January" Then ...this is my code line.I would like to replace my criteria"January" with a listbox or combobox with months names so that my out put results vary according to my list selection from the combobox., so that I need not to change or edit my criteria value every time according to my requirement.Is it possible in vba?
I have a list of customers in listbox1 (the text values of which come from a spreadsheet), that I want to refine as I type in textbox1. I'm not sure if it's possilbe, but I would like it to work similar to the itunes search (if you're familiar with it) where it searchs for any occurance of the text within the list as opposed to just searching for the letters at the beginning of the word.
