I want to select items in a listbox and transfer those items via command button in a textbox. The listbox is already filled. I have no idea how to realize that.
Attached is the form I created so far. I copied everything together and matched it up for me. It's probably not the best way but it works. I marked the section where I need help in yellow.
I am trying to create a data entry form with a text field and a listbox. The list box is populated by another sheet and the text box will be used to enter names. I need to be able to enter a new name, select multiple options from the list box and then click a button to add this info to a sheet in excel.
I have read about changing the list options to allow this etc - the problem is I can't get the results to go back into excel - all I get is a name with nothing from the listbox.
Comma separated data on sheet 2, look up info on sheet 1, return comma separated data on sheet 2.
Sample file attached : Book1.xlsx
I am trying to create a userform to allow user to register their new team member. In the userform, I have textbox1 (new team member) & textbox2 ( name of their leader). Once both the textbox has been filled, the user need to click on the commandbutton, which will then add the newly registered team member to the combobox1 in the Sheet1 and then create a spreadsheet(tab with the Team member name) in a separate workbook, which corresponde with the name of their leader (as filled in textbox2 in the userform.
View 2 Replies View RelatedGiven a list of beginning years and ending years, how can I create a column that gives the whole list of inclusive years separated by a comma?
Start Year End YearList of Years
1985 1995 1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995
2000 2009 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009
How to have a validation list (drop-down) from a single-cell in which values are separated by a comma.
Example I have.
I have a wine list which have many categories of which
COL A / COL B / COL C
Wine Name / Wine Producer / Vintage
I wrote a VBA code to look-up duplicates names and give the producers that make them. The names of the producers will be in an invis cell as Comma Separated Values.
For example: Wine 11 is made by producer X and Wine 11 is made by producer Y. I will have X,Y in a cell which need to be in a drop-down menu when Wine 11 is selected.
I got everything done. The only issue is to get the list. The problem is that the drop-down list shows X,Y as a single component and not as 2 drop-down components. If i were to write down X,Y in the validation list tab, it will show it as 2 components but referring to the cell doesn't.
I cannot find this information anywhere else in this forum...
Does anybody know how to transfer an item from one list box to another using code, on the click of a button.
The list box with the information in is called 'Team_ListBox'The list box i am wanting to transfer to is called 'Starting_Team_ListBox'The button to do this task is called 'AddPlayer_team_Btn'
This might be pretty tricky. I'm trying to create formulae that can find non-empty cells in a list, and separate by date.
Example:
The following are given:
DateItem
1/23AAA
1/24
1/25BBB
1/26
1/27
1/28
[Code]....
I would like:
List 1 (Jan) List 2(Feb)
AAA BBB
BBB CCC
The original equation was for finding non-blank items without separating by date was given to me below Hopefully it's much easier with it: [URL]...
I am confronting a problem with a ListBox that displays Item by the selection of a ComboBox in the same Userform.
All works like this in the column “A” from my data sheet I have a list of names and in the column J I have a list of years.
What my UserForm1 dose is to select the year column with the ComboBox and display in the ListBox the corresponding name from this year selection. Until there all work fine.
Now I have to display in the TextBoxes form the Userform2 all data form my (data sheet) and this dose not work properly.
What happens is that when I select and Item in my listBox.Userform1, Usrform2 kind of display Items from another person.
I will also attach an example on this thread for a better view of my problem.
I was wondering if there was a way to create a pop-up list to appear when a user selects a certain cell that would provide the user with a list of (in this particular case) inventory items. The user would select which items they require for the task at hand and the total $$cost of the items would appear in the cell once is is deselected.
View 4 Replies View RelatedI have sheets named exactly the same as the entries of a listbox. Now I want excel to copy the value located in e35 in the worksheet previously chosen.
I tried th efollowing, but this doesn't seem to work. I simply recorded a macro doing what I wanted it to do (orange) but replaced the reference to the sheet with what I thought would be the choice the user made (green)
Do While continue = vbYes
UserFormware.Show
Cells(16, 4) = UserFormware.ListBox1.Text
Cells(18, 4) = UserFormware.TextBox1.Value
Sheets("UserFormware.TextBox1.Value").Select
Range("E35").Select
Selection.Copy
Sheets("Calculator").Select
Range("E35").Select
Selection.Paste
If UserFormware.ListBox1.ListIndex = -1 Then
MsgBox "You must select an item"
End If
Unload UserFormware
continue = MsgBox("Do you want to add another warehouse?", 4)
Loop
I have a userform with many textboxes that I am using to collect data which is transferred to a worksheet using a command button on the userform. All data is correctly transferred to the worksheet except for the text box I am using for the date.
The date is transferred from the userform to the spreadsheet but the date is left justified implying that it is text but dates that I have manually entered into the spreadsheet cell are right justified. This may seem picky but I am using a 'count' function within the spreadsheet to determine how many rows contain the date.
I am using the following code which I am entering in the format of dd/mm/yyyy, to to transfer the date to Cell A1 the worksheet 'Results'.
Private Sub CommandButton1_Click()
Worksheets("Results").Cells(1, 1) = UserForm1.Textbox1
End Sub
how to transfer the date to the cell so that it right justified, hence treated as a number within the cell.
My question is, instead of deleting the row, how can I use the combobox to replace that row with the updated info rather than delete and resort? I have a combobox that selects names from a sheet, column A and populates itself on Userform activate/initalize. Using the Combobox to select a name, this code below populates all the fields on the form, various text and comboboxs.
When users hits the update button, it currently finds the row and deletes it, see second code example, but this reaks havoc on various parts of the program, I have to move the combobox and add name textbox's because when it deletes the row, the combobox takes on the next rowsource and then writes that info, rather than the info selected.
Private Sub ComboBox1_Change()
If bBlockEvents = True Then Exit Sub
If ComboBox1.Value = "" Then
Reset
bBlockEvents = True
ComboBox1.ListIndex = -1
bBlockEvents = False
Exit Sub
End If
userow = ComboBox1.ListIndex + 3
usercolumn = 1
If userow = "0" Then
ComboBox1.Value = ""
Reset
Else.......................
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
How to get a listbox to populate from a database sheet the code I am using to do this is posted here and it works great. My problem is now I want to get the Listbox1 results to populate my UserForm5 textboxes from the row selected in the ListBox1 of Userform4, but I am getting the error "variable not defined" and the "rw" gets highlighted. as seen in the code below it.
UserForm4 portion of the code that does the search of the sheet that holds the data
Code:
Private Sub CommandButton1_Click()
Dim sFindText As String, sFirstAddr As String
Dim i As Long, lFindCol As Long, lCol As Long, lRow As Long
Dim rMyData As Range, rMySearchField As Range, cFound As Range
Dim vArray() As Variant
[Code] ......
Userform5 issue is this rw in red doesn't seam to be right
Code:
Private Sub UserForm_Initialize()
TextBox1.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 0) '
TextBox2.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 1) '
TextBox3.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 2)
TextBox5.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 3)
[Code] .........
Returning items selected from a ListBox. I have a Multiselect Listbox with 15 items. Additionally, I have a worksheet with 15 columns (each one corresponding to the 15 ListBox items). I'm looking for code that will do the following:
After a user selects values from the ListBox (can be more than 1, thus the Multiselect), I would like for "TRUE" to appear in row 2 of the worksheet for each column. (IE: Column A is for Bikes, if a user selects "Bikes" from the ListBox and hits a CommandButton, I would like for A2 to say "TRUE".
I'm attempting to add the values for a combobox and (2) text boxes to a list box on a form. The list has 3 columns. When I run code to add to the list box the values are added on separate rows instead of the same row. See code below and attached screen shot.
VB:
Private Sub cmdAddToList_Click()
Dim i As Integer
Dim iRow As Integer
If Me.cboParts.ListIndex = -1 Then Exit Sub
For i = 0 To Me.lstParts.ListCount - 1
[Code] ....
UserForm3.jpg
I spent so long time to fix this problem, but it seems that I can't go on. I have a simple question. How can I get the data from the UserForm and use it in the worksheet? Everything works fine, only the UserForm makes problems. Here is the
View 4 Replies View RelatedI would like to insert the count of items selected in a listbox in a Userform into a cell. I have been scowering the internet and all of the solutions seem pretty clunky (or don't work).
An alternate way that I could do this is if I have the values selected be entered into a column and then I can use the =count() formula, but I can't figure out how to do that either...
I have four columns of data. Column A is for the Model, B is for options, C is for color, and D is for Trim. What I need to do is for each model I need to have the options in column B to be listed down the page without commas. Each 3 code option needs to have it's own cell. In the below example there are 8 models with their options, color, and trim. I cannot have the options mixed up with the other models. Hope this makes more sense.
Here is the raw data ...
I need to make an userform which can look up data from a sheet that contains a list of distributors and adresses.
I need to be able to search by:
1- postal code
2- postal code and product reference
Hence, I have 2 textboxes for inputing the postal code and the reference, and a listbox that I would like showing the distributors' names that are localized in the corresponding area and which did buy the product from us. Here's what my database sheet looks like:
Postal Code
Products
Distributor
Adress
[Code].....
What I don't know how to do is to have a variant Rowsource property for the listbox, according to the postal code and the product reference the user enters, plus I want one distributor's name to show only once in the case I'm only searching by postal code.
I have a userform and on this userform i populate a listbox with values.
What i want to know is how do i extract ALL the items in the listbox.......not just the ones that are "selected".
I have a cell in a table containing user entered Comma separated values.
How can I process it so that user entered values can be referred to just like in an array? Is it possible to do something like cell.value[0]?
For example --
cell A1 has values red, blue, green. B1 has a formula that can refer to "red" in A1 by writing something like A1.value[0]
Is it possible to have a function return values to another cell reference than from the cell where it is called? Like a UDF called functionIndividualValues(InputcellReference, OutputCellReference) functionIndividualValues(A1, A2) meaning that the input string for the function is in A1 and the output should go to the cell A2.
In filed I have couple of value separated by comma like below:
A1 header1
B1 header2
C1 header3
Audi
592035, 579733, 653749, 579735
20 000
If my macro found that string (always will be separate by ",") should split the string and add rows (= to number of string). The output should be as below:
A1 header1
B1 header2
C1 header3
Audi
592035
20 000
[Code] .....
I have:
Code:
Set sourceWb = ActiveWorkbook
Set ws = sourceWb.Worksheets(1)
Dim LastRow As Long
Dim MY_Split As Variant
LastRow = ws.Cells(ws.Rows.Count, "A").End(xlUp).Row
[Code] ...........
I have a listbox which is populated with filenames from a specific folder when the userform is acivated. The user can choose any filename in the list to open it or adversly to delete it. When delete is used (ListBox is set to MultiSelectExtended) the selected files are 'Killed'. The filename list is then refreshed and listbox repopulated and resized ready for the next action. The problem is the recalculated ListBox.Height works fine and the ListBox shrinks in height as expected, but a vertical scroll bar appears as the number of lines is still that was prior to the files being deleted. This happens despite code having run an instruction to make the ListBox.Height = New Number of entries * line height. This doesn't stop the application to perform as expected but is an annoying cosmetic thing.
View 3 Replies View RelatedThe code for sorting a multi-column listbox in Retain Selection After Sorting ListBox was really good, and I've used it a lot in an application I'm building.
What I'm hoping to do is reload a listbox in such a way that the items appear in the same order they were previously in. I'll describe two scenarios:
1. User edits a record
- user sorts listbox
- user selects a record
- user edits record
- listbox reloads, unsorted
2. User adds a record
- user sorts a listbox and sees a record is missing
- user adds the missing record
- listbox reloads, unsorted
ideally the last step for each would be "listbox reloads, sorted" and the user would go on down the list. the tricky part i think is when rows are deleted or added.
i'm starting on a solution, but if there's some existing code that will do this i'd appreciate if someone could point me to it (because, for example, the listbox sorting code i referred to above anticipated things i did not).
I have listbox of information set up to have a user choose several items. I want the items to then transfer to another worksheet. I am using the code I found here:
Private Sub CommandButton2_Click()
Dim lItem As Long
For lItem = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(lItem) = True Then
Sheet2. Range("A65536").End(xlUp)(2, 1) = ListBox1.List(lItem)
ListBox1.Selected(lItem) = False
End If
Next
End Sub
But it is only moving The first item in a column, instead of all the columns of information. What do i do to get it to move all the information??
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
I need to count how many comma separated elements are in each cell. This is what I have so far,
[Code] .....
The error is Method 'Range" of object'.
I have a relatively large data set that is separated into columns A-G. In column G, I have a multitude of values that are separated by commas. What I would like to do is to separate these entries into rows while keeping those values in A-F constant.
Here is an example of what I would like to do through VBA:
ex1.jpg
to
ex2.jpg
Also, kudos. This website has now gotten me interested in VBA.
