I've got a formula that takes a value from the last numerical entry in a column. Is there a way to code this so that I don't have to enter the cell location of that number manually every time I append the sheet?
View 7 RepliesWe have an excel worksheet with textfields, that are compiled (when a btn is clicked) and the results are assigned to a static range. (Meaning, the results always appears in the same cells)
Question is: How can i have the results appear in a different row each time, starting on row 14 ?
I have a worksheet (A) similar to the following:
Jan '12, Feb '12, Mar '12 --> Header Row
-5, 10, 2
6, -2, 3
5, -2, -1
I have another worksheet (B) with the same header Row (Jan '12, Feb '12, Mar '12). I need to create formula in cell A2 on worksheet B (right under Jan '12) that dynamically locates the Jan '12 column in worksheet A and then sums the numbers in that column only if they are < 0.
So in cell A2 on worksheet B (under Jan '12) I'd have -5 (only -5 is < 0), in cell B2 on worksheet B (under Feb '12) I'd have -4 (-2 + -2) and in cell C2 on worksheet B (under Mar '12) I'd have -1.
I've tried several variations of sumproduct, sumif, index, etc. with no luck.
I need to locate the highest number in column b then in column c minus the users score from the highest so they can see how much they are behind the highest score. eg.
A B C D
fred 150 highest
dawn 125 25 points needed
mark 100 50 points needed
kevin 80 70 points needed
Is there a way to reference a column depending on its header? Is there a way of doing this without the need of surveying one-by-one all the column headers with a for loop? I need this cuz if I have a very dinamic program which moves columns arround and depending on the state of the program the position of a column can change.
View 2 Replies View RelatedIs there a formula I can use to locate the last active cell in a column. I did use the count function, however this isn't always reliable if there are blank cells within the column
View 5 Replies View RelatedI want to look at a whole colum and to tell me if the 6 digit number is located within it.
is "787897" located in column D? if so tell me by either Y / N or 1 / 0.
Here is the sheet where I entry new data. From left to right: Productnumber/article/supplier/price per item/starting nr of articles/order threshold/ date 1st order/date of delivery. When I press the button "verwerk" the data will be transported to the sheet "Voorraad verloop" shown underneath. As you can see the first problem consists of the placement of the first table. I can't get it to the first column. The second problem is that when I enter a new product like in the first image, it overwrites the current data in the sheet "voorraadverloop". See the image below. I used the following macro:
Private Sub CommandButtonVerwerknieuw_Click()
Dim iLC As Integer
Dim FindString As String
Dim rng As Range
Dim Lr As Long
If Application.WorksheetFunction. CountA(Range("A4:F4")) < 6 Then
MsgBox ("Niet volledig ingevuld"): Exit Sub
End If
FindString = Range("A4")
If Trim(FindString) <> "" Then
With Sheets("Voorraadscherm").Range("A29:A65536")
Set rng = . Find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
lookat:=xlWhole, _ .................
I need a formula (or formulas) to give me the "coordinates" (Column & Row location) of a certain value in a large rectangular range. Intuitively this should be doable with a smart combination of VLOOKUP, HLOOKUP, INDEX, MATCH, ADDRESS and/or CELL functions (maybe in the form of "array formulas") but I can't seem to find the way...
Here is an example of what I need:
I have a large rectangular range (A10:F500), full of numerical values. Then in cell A1 I have one of the (many) values contained in the range, let's say, 3.14159. I need two formulas that give me the following:
a) A formula in cell B1 that tells me in which COLUMN of the range the value 3.14159 is located
a) A formula in cell C1 that tells me in which ROW of the range the value 3.14159 is located
If the range consisted of a single column (or a single row), this would be an easy INDEX and MATCH combination.... but I'm dealing with a *rectangular* range here...
I am new to VBA and have tried to develop the code for finding a specific stock symbol (Column A) from over 4200 symbols from a downloaded csv file, copy the data in in its (specific symbol's) row (in the next 5 columns B to F) to the 3rd blank row in the master workbook (data arranged from Bottom to Top). In the Master workbook each stock symbol has a worksheet with its symbol as the tab e.g. BHP.AX is the tab or sheetname for BHP stock in the Australian Stock Exchange. The downloaded file comes from a subscribed site EODData which provides daily OHLCV (Open/High/Low/Close/Volume) data against each symbol.
My attempt is shown below and it is very primitive. It does not work! I wish to run it from the Master workbook (name:-0PortfolioASXMultipleIB.xlsm) and not from Csv Data file.
VB:
Sub Macro0CopyFromCSV()
'Insert a blank row and format it in Master workbook
Rows("3:3").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ......
This is a re-submission of a question previously submitted because the title for the first submission was so poorly worded.
I have a column that has numerical values in random order. I want to locate the first occurance of a value in that column.
I have unsuccessfully tried an Index-Match function - apparently unsuccessful because the values must be in ascending or descending order?
I need a VB Script or Excel tip to Locate the latest value in the column.
Example1
Value
1
2
3
4
5
6
Latest Value
6
Example2
Value
1
2
3
4
5
Latest Value
5
Note: I have 1 Row and 'N' Column. Column may have null value, which need to be ignore as mentioned in the example.
Also., if in future new value has been entered in the column then the Latest value has to be updated automatically with the new value.
In the attached spreadsheet I would like to locate the peak values of the numbers in column "F". I don't know if this is best done with a series of functions or by using a macro.
Column "F" translates to the light blue line on the attached chart. Column "F" (MACD) is the difference between a 12 week exponential moving average (EMA) and a 26 week EMA.
I would like the peak values from column "F" re-stated into column J,K,L or M. Ideally I would like to find the highest peak that occurred in a rolling 12 weak period. So not all peaks would need to be posted. By doing this I would only be identifying longer trends .
I'm using Excel 2007. 25 years experience using Excel and functions. Limited experience with Macros though long ago I used to write C code.
I am using the below code to locate the last column in various worksheets before pasting information. The problem is the column selected is either: Correct, Is a blank column with many blank columns in between it and the last visible text. The code also highlights all the cells containing text in some sheets. The results are the same for each sheet the code is run in i.e it is not varying.
View 4 Replies View RelatedI have this nice formula (listed below) that I'm trying to use to get the employee names that belong to each manager. How ever using the first formula I only get the first name in each cell and using the second formula (associates is a define name for the range A1:A70) gives me name that do not belong the that manager....
I would like this formula to only pull names from the manager that is listed in the C column....
I have installed Excel on my new computer. Went to save a macro and I cannot locate the file "Personal.Xls"
Inside of Excel I can unhide "Personal.Xls" and it is visible.
I have one column of data (numbers). Within this column, are the values for two different categories...which are separated by a blank row. And then a total for each product given one column over; like this:
Product1 123
Product1 456
Product1 789 1368
Product2 456
Product2 123
Product2 456 1035
Either product can increase/decrease in rows, so I am unable to set a static range. The only solution I got on my own was to use SUMIF (sum the column of values if it matches the name "Product1" or "Product2"). This is fine until someone misspells the product name or leaves it off completely; which is why I prefer to go off the actual values.
My 1st preference is to go off the totals. Basically, return the 1st value (ie 1368) in the column, and then in another cell, return the 2nd value in the column (ie 1035).
My 2nd preference would be to sum the individual values in the column until a blank cell is encountered, and then return that value. Then continue on until another blank cell is encountered, and return that value as well.
I know very little of vba, so I haven't taken that route, but I bet this is easily done as a UDF (although I would prefer not to do it that way).
Is there a easy way to find the last row of data in an Excel sheet using VB?
View 2 Replies View RelatedFinding a link and deleting it. When I open a specific excel file I am working on I get an update links error
Unable to open [URL].... Cannot locate the Internet server or proxy server.
- I have done a search for "[" throughout the whole workbook and found nothing neighter within functions nor values
- I have looked at the Names and found nothing of the sort
- I have looked for hyperlinks within 2-3 images and found nothing
- I have looked through the VBA code
This does not happen when I open other excel files....
I'd like to use the INDEX & MATCH functions to look in a table (in 'misc') and find a value contained within a specific cell in Sheet 1 but I am getting a #REF error and I'm not sure why.The formula is as follows:
VB:
=INDEX(misc!1:50,(MATCH(Sheet1!A13,misc!D:D,0)))
Where:
Table ref = misc!1:50
Location of value to find = Sheet1!A13
Lookup array = D:D
I know how to delete duplicates using the function under the data tab, but how can i locate them. For instance, a spreadsheet with a list of PO numbers, how can i do a search to see if it is showing the same PO number multiple times?
View 9 Replies View RelatedIn the attached sample workbook, (Excel 2007 format), there are hundreds, maybe thousands, of drawing objects and rectangles. They are mostly located near the top of column AC. You can't see any of them, because they are empty, or formatted to have no line and no fill, ubt if you move the cursor around in that area, it will eventually give you the option to "select" one of the objects. They appear to be stacked on top of each other.
This bloats the worksheet terribly. I have managed to shave the size of the attached sample down to 100K, bu deleting about 200 of the objects, but if I save this balnk file as an Excel 2003 file, it is 1.3 Mb.
I have discovered how to show what objects are on the worksheet, by selecting "Find and Select" and choosing to show the "Selection Pane". This pane shows hundreds of blank objects in the sheet. When this pane is open, however, if I try to select and delete an object, Excel locks up on me.
I have the below formula that pastes data into the worksheet entered in the " " it works great but only when the workbook was last saved on that sheet, how can it locate that worksheet sheet even if the the workbook was last saved and another worksheet. if the workbook was saved on a different sheet name the vba doesn't finish
[Code].....
I'd like to find the first sheet in my workbook. I know how to find the last sheet:
View 4 Replies View RelatedI am having a problem with locating a certain date. What I am trying to do is scan down a list of dates and have returned the row is is in. I have been using the MATCH function and it was fine except when there is no MATCH. In the case where there is no match I would like it to select the next cell.
I am currently using this =MATCH(Search!G5,Data!F1:F10005,0) where Search!G5 is the date I want to find Data!F1:F10005 is the set of dates.
I have a workbook that requires a multiple of 3 to be entered in a cell. If a quantity other than a multiple of 3 is entered, a Msgbox pops up and requires the quantity to be changed to such value.
I am looking for where this is handled. I found part of it in a Private Sub:
Option Explicit
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
End Sub
But I cannot locate where the other parts of the code is stored....
I would like to see how this is handled so I can incoporate this in my own worksheets.
This formula finds the last space from the right and returns the values less the last space and whatever is to the right-
=TRIM(IF(LEFT(Y25,2)="~C",REPLACE(LEFT(Y25,FIND("`",SUBSTITUTE(Y25," ","`",LEN(Y25)-LEN(SUBSTITUTE(Y25," ",""))))),1,FIND(" ",Y25),""),RIGHT(Y25,LEN(Y25)-FIND(" ",Y25))))
Results of a item of a whole size:
LAKAI KOSTON SLCT INDY SHOE BK
However- I forgot I had added a criteria to convert records that have a fractional value from decimal to a fractional value and an extra space shows up. I need to alter the above formula to handle this additional condition, returning the value w/ out the second space and the size 10 shown below.
Results of an item w/ a fractional size, ie. 10 1/2:
LAKAI KOSTON SLCT INDY SHOE BK 10
Linked to this post: new post started to help avoid confusion: but wanted to show prior material...
http://www.mrexcel.com/board2/viewto...766e4507d1a402
I am trying to append about 15 files of CSVs. I have code that works on importing the data, placing it at the end of the previous data, but then it clears the previous data. Here is the code
Sub import_BCDV()
Dim lastrow As String
Selection.End(xlDown).Select
Selection.End(xlUp).Select
' Range("A515").Select
lr = FindLastrow1()
lastrow = "A" & lr
MsgBox lastrow
Range(lastrow).Select
' "TEXT;J:QA ReportsQA ReportsWorkbenchBCVD 1-11-09 1-17-09.csv", _..........................
I have created a form that will be used my many people. The first person will enter their information and click a button to transfer their data to a second workbook, as well as send the workbook via email. At a later time, someone else will add more data to the emailed form and transfer this to the database in the second workbook. What I need is to be able to find the row in the second workbook containing the data transferred the first time and add the data that was put in later to the same row as the original.
View 7 Replies View RelatedHow can I program a variable 'rowcountnumber', that would count the number of active rows, starting from row 10 ?
View 8 Replies View Related