Is there a way to reference a column depending on its header? Is there a way of doing this without the need of surveying one-by-one all the column headers with a for loop? I need this cuz if I have a very dinamic program which moves columns arround and depending on the state of the program the position of a column can change.
View 2 RepliesI've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
We have an excel worksheet with textfields, that are compiled (when a btn is clicked) and the results are assigned to a static range. (Meaning, the results always appears in the same cells)
Question is: How can i have the results appear in a different row each time, starting on row 14 ?
I've got a formula that takes a value from the last numerical entry in a column. Is there a way to code this so that I don't have to enter the cell location of that number manually every time I append the sheet?
View 7 Replies View RelatedI have a worksheet (A) similar to the following:
Jan '12, Feb '12, Mar '12 --> Header Row
-5, 10, 2
6, -2, 3
5, -2, -1
I have another worksheet (B) with the same header Row (Jan '12, Feb '12, Mar '12). I need to create formula in cell A2 on worksheet B (right under Jan '12) that dynamically locates the Jan '12 column in worksheet A and then sums the numbers in that column only if they are < 0.
So in cell A2 on worksheet B (under Jan '12) I'd have -5 (only -5 is < 0), in cell B2 on worksheet B (under Feb '12) I'd have -4 (-2 + -2) and in cell C2 on worksheet B (under Mar '12) I'd have -1.
I've tried several variations of sumproduct, sumif, index, etc. with no luck.
I need to locate the highest number in column b then in column c minus the users score from the highest so they can see how much they are behind the highest score. eg.
A B C D
fred 150 highest
dawn 125 25 points needed
mark 100 50 points needed
kevin 80 70 points needed
Is there a formula I can use to locate the last active cell in a column. I did use the count function, however this isn't always reliable if there are blank cells within the column
View 5 Replies View RelatedI want to look at a whole colum and to tell me if the 6 digit number is located within it.
is "787897" located in column D? if so tell me by either Y / N or 1 / 0.
Here is the sheet where I entry new data. From left to right: Productnumber/article/supplier/price per item/starting nr of articles/order threshold/ date 1st order/date of delivery. When I press the button "verwerk" the data will be transported to the sheet "Voorraad verloop" shown underneath. As you can see the first problem consists of the placement of the first table. I can't get it to the first column. The second problem is that when I enter a new product like in the first image, it overwrites the current data in the sheet "voorraadverloop". See the image below. I used the following macro:
Private Sub CommandButtonVerwerknieuw_Click()
Dim iLC As Integer
Dim FindString As String
Dim rng As Range
Dim Lr As Long
If Application.WorksheetFunction. CountA(Range("A4:F4")) < 6 Then
MsgBox ("Niet volledig ingevuld"): Exit Sub
End If
FindString = Range("A4")
If Trim(FindString) <> "" Then
With Sheets("Voorraadscherm").Range("A29:A65536")
Set rng = . Find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
lookat:=xlWhole, _ .................
I need a formula (or formulas) to give me the "coordinates" (Column & Row location) of a certain value in a large rectangular range. Intuitively this should be doable with a smart combination of VLOOKUP, HLOOKUP, INDEX, MATCH, ADDRESS and/or CELL functions (maybe in the form of "array formulas") but I can't seem to find the way...
Here is an example of what I need:
I have a large rectangular range (A10:F500), full of numerical values. Then in cell A1 I have one of the (many) values contained in the range, let's say, 3.14159. I need two formulas that give me the following:
a) A formula in cell B1 that tells me in which COLUMN of the range the value 3.14159 is located
a) A formula in cell C1 that tells me in which ROW of the range the value 3.14159 is located
If the range consisted of a single column (or a single row), this would be an easy INDEX and MATCH combination.... but I'm dealing with a *rectangular* range here...
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
I am new to VBA and have tried to develop the code for finding a specific stock symbol (Column A) from over 4200 symbols from a downloaded csv file, copy the data in in its (specific symbol's) row (in the next 5 columns B to F) to the 3rd blank row in the master workbook (data arranged from Bottom to Top). In the Master workbook each stock symbol has a worksheet with its symbol as the tab e.g. BHP.AX is the tab or sheetname for BHP stock in the Australian Stock Exchange. The downloaded file comes from a subscribed site EODData which provides daily OHLCV (Open/High/Low/Close/Volume) data against each symbol.
My attempt is shown below and it is very primitive. It does not work! I wish to run it from the Master workbook (name:-0PortfolioASXMultipleIB.xlsm) and not from Csv Data file.
VB:
Sub Macro0CopyFromCSV()
'Insert a blank row and format it in Master workbook
Rows("3:3").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ......
This is a re-submission of a question previously submitted because the title for the first submission was so poorly worded.
I have a column that has numerical values in random order. I want to locate the first occurance of a value in that column.
I have unsuccessfully tried an Index-Match function - apparently unsuccessful because the values must be in ascending or descending order?
I need a VB Script or Excel tip to Locate the latest value in the column.
Example1
Value
1
2
3
4
5
6
Latest Value
6
Example2
Value
1
2
3
4
5
Latest Value
5
Note: I have 1 Row and 'N' Column. Column may have null value, which need to be ignore as mentioned in the example.
Also., if in future new value has been entered in the column then the Latest value has to be updated automatically with the new value.
In the attached spreadsheet I would like to locate the peak values of the numbers in column "F". I don't know if this is best done with a series of functions or by using a macro.
Column "F" translates to the light blue line on the attached chart. Column "F" (MACD) is the difference between a 12 week exponential moving average (EMA) and a 26 week EMA.
I would like the peak values from column "F" re-stated into column J,K,L or M. Ideally I would like to find the highest peak that occurred in a rolling 12 weak period. So not all peaks would need to be posted. By doing this I would only be identifying longer trends .
I'm using Excel 2007. 25 years experience using Excel and functions. Limited experience with Macros though long ago I used to write C code.
I am using the below code to locate the last column in various worksheets before pasting information. The problem is the column selected is either: Correct, Is a blank column with many blank columns in between it and the last visible text. The code also highlights all the cells containing text in some sheets. The results are the same for each sheet the code is run in i.e it is not varying.
View 4 Replies View RelatedI am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
[Code] ......
This works, UNLESS "My Column Header" is the last column, or second to last column, then it jumps left two columns, instead of landing on the correct column.
The purpose of this script is to select a cell directly in that column that I was searching for.
I need a formula to return column header if there is data in the column, any data.But I also need to return the second, third, fourth header with data too
In column A row 2, I have =IF(M8"",$M$1,IF(N8"",$N$1,IF(O8"",$O$1,IF(P8"",$P$1,IF(Q8"",$Q$1,IF(R8"",$R$1,IF(S8"",$S$1,IF(T8"",$T$1,""))))))))
This returns the row 1 header for the first instance of data in row 2 columns M thru T But in B2, I need the second header with data in the column.
I need the results in yellow (1st, 2nd, 3rd, 4th) from the array to it's left
1St match2nd 3rd 4thColumn MColumn NColumn OColumn PColumn QColumn R
Column MColumn PColumn QData data2Data3
Column NColumn OColumn PColumn R Data Data2 data3 data4
Would use match/index but can't increment it to the second or 3rd match
I'm looking for a formula that will return the column header (a date) of the first instance of a number greater than 0. For example if columns A through S had dates as in row 1 (header row), and in row 2, every column contained a 0 up until column P, I would want the date (Row 1, Column P) returned? I think this might be a sort of index/match formula, but I am not very familiar with these.
View 3 Replies View RelatedI have a spreadsheet with several columns (all column names are in row 1).
I have 2 of column names. Note that their actual column# might change so the macro would have to look for the column name and NOT the column position ...
I would like to add the column header to each of the row item and price, we maintain masters in the matrix format, butthe application supports only the row item mapping with the customer and pricing. Attached excel file
View 2 Replies View RelatedI need a formula to lookup and retrieve data from a table of values. Given an EMP-ID in column A of the row that contains the formula and given a column name in row 1 of the column that contains the formula, I need to do a lookup. So, in effect, I am doing a lookup based on two values .. the column header and the row header.
I have attached a small model to illustrate what I need. Cell C-3 in the first worksheet will contain the formula to lookup and retrieve the value in cell C-7 in the second worksheet, based on the values in cell C-1 (column header = “Database Col 2”) and in cell A-3 (row header = “257”) in the first worksheet.
Have a set of dates as column headers across a worksheet. Rows are product names. When a product is delivered, the cell is marked "delivered" for the date (in the column header) it was delivered. Need a formula that will look across each row (product), and return the date of the first cell with the value "delivered". I have: =INDEX(F19:AS19,1,MATCH("delivered",F19:AS19,0)) <for row 19. right now, but its just giving me "delivered" as the value and I cant figure out why.
View 2 Replies View RelatedI have software (SAS Add-In for Microsoft Office) that loads external data into Excel. The data has a title, header, and rows/columns. It automatically creates a named range such as Table1. The named range does NOT include the headers.
Here is an example:
Code:
SASApp:SASHELP.CLASS
Name
Sex
[Code]....
As above, can I dynamically derive the column number based on the header row of the named range, where such named range refers to a table?
On a related topic, can I derive the column name given the column number? For example, in pseudocode:
Code:
For currCol = firstCol To (firstCol + lastCol - 1)
' Assume a function called ColumnName
Debug.Print ColumnName(currCol)
Next
Is there a way to link a header or a portion of a header to a specific cell?
View 14 Replies View RelatedI am looking at formula to return the column header, see example attached.
View 2 Replies View RelatedCan I change Coulmn Header Names... What I mean to say that , We Have Generally Column Names A, B, C, D, ... I would like to Change these names what ever I Want..
View 11 Replies View Related