I have 2 spreadsheets. First one has monthly results and columns are named with abbreviations. Second sheets is for presentation, has only a select number of lines and full names instead of abbreviations. This second sheet is supposed to pull values from sheet 1 but I don't know how to call up those values since the titles are different. Short of using SUM I don't know what to do.
View 7 RepliesI have a tab with the following on:
Australia
SOME VLOOKUP FORMULA
SOME VLOOKUP FORMULA
I then have another tab which is similiar to this:
Australia Danny 23
Australia David 25
Canada Ben 35
Basically what I want is....where ive put some formula I want to lookup the title, in this case australia which is the cell above, search within the table then enter the name to the right of that. I have done this, however it only ever uses the first name on the list..... Example i always get danny on a role, i have managed then to get it to say david underneath but then if i copy the forumla down again it continues with danny, david etc.
I have been assigned a task of finding the lowest cost of four possible solutions however I have quite an extensive list of items to work with. To make this easier, I need to be able to find the lowest cost in my row (which is not sorted by lowest to highest value) and return the column heading associated with that lowest cost.
View 2 Replies View RelatedThe title bar is missing for one 2002 file. This is the same bar that has the minimize/maximize button in the right corner.
My mind is drawing a blank for a fix. I've tried the *view, tool bar, customize* and can't find the missing bar.
I have a column of numbers at random intervals which I am trying to insert totals into, the totals should only total the cells since the last total. Take a look at the code I started that I thought might do the trick and revel in the amateurishness of it all!
Sub TB
Range("A2").Select
Selection.End(xlDown).Select
ActiveCell.Offset(1, 0).Select
ActiveCell.FormulaR1C1 = "=SUM(R[-5]C:R[-1]C)"
End Sub .......
Excel 2003. How can I put an icon in the title bar of an Excel Workbook? And can it be a .jpg or does it need to be a .icon. How can I put a title and NOT see " Microsoft Excel" in the title bar.
View 3 Replies View RelatedI have the table with multi columns and values like in the image below:
Untitled-2.png
how to get the result in the red border.
In the following macro, how to get the name of the chart as the slide title?
PHP Code:
Sub Range_Chart_1()
'Requires a reference to the Microsoft PowerPoint Library via the Tools - Reference menu in the VBE
Dim PPApp As PowerPoint.Application
Dim PPSlide As PowerPoint.Slide[code]....
How do I insert a row with A-N Merged and centered? Interior color should be dark blue with white font.
Currently I'm doing this to add a space based on a number I have in a column S.
[Code] .....
In column S I have a series of numbers 1 - 5 and when a unique number is found Insert this row I can't seem to figure out how to create.
[Code] .....
Is it possible to take the headers of a UserForm. I mean the bit that can have a form name and the little cross on the top right hand corner.
View 2 Replies View RelatedI want to put the title of the work book in cell A1
I have been using =CELL("filename",A1) but this returns
W:APMProdqty8882Prod 2011[8882wk4011.xls]shift reports
Is it possible just to return 40 ??
Any way to get the name of a program. I saw in the forum that we have a code to get the name of all programs that are running, but I would like to have the name of only one program. Can I do that?
something like this:
I have the ms outlook open right now, the title bar is "Inbox - MyPersonalEmail - Microsoft Outlook", can I get that name in a variable? there is any code for this?
I used this code for some ,,protection'' of the title (rows):
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Dim myRange As Range
Set myRange = Range("A1:F4")
Set isect = Application.Intersect(myRange, Target)
If Not isect Is Nothing Then
MsgBox "DON'T change this cell."
On Error Resume Next
If Target.Count = 1 Then Target.Cells.Offset(0, 0).Select
If Err Or Target.Count > 1 Then Cells(0, 0).Select
On Error GoTo 0
End If
End Sub
Is there a better way for doing something like this? (the code above)
It worked, but not that kinda perfect and I added some other features (in VBA) and now the code gives me this error: Compile error: a variable isn't defined.
how to using excel vb repeat a row of a worksheet at the top of a page, ever page?
code to remove the titlebar of a userform in Excel/VBA.
Remove meaning the program user must not beable 2 see the titlebars..
I'm using concatenate to name a chart title. My problem is that when I concatenate two dates I lose the date format. I'm after a title which looks like 06 December 2007 - 13 December 2007
I'm actually getting 39422 - 39429
The cells have been formatted in date format but lose this when concatenated.
Is there a sollution?
I have a pivot table which I update on a regular basis. There's also routine during the pivot table refresh to assign variables to the minimum and maximum dates I include in the range.
Here's what I'm looking for - The chart title needs to be two separate lines. It should look something like this:
Labor Operations performed from min_date to max_date
(labor op code, description, total ops)
By themselves, I have no problem doing this. What I can't figure out is how to format the font of the first line of the title to have different characteristics from the second line. The second line is sort of a descriptor of the part in bold (in an attempt to keep my boss from asking me questions about what he's looking at)
how to remove the title bars on userforms? I cant work it out for the life of me.
View 5 Replies View Relatedi have 2 workbooks open, i need to write the code so that i can copy the sheets from each of the workbooks to a whole new workbook. this does not seem like a difficult task at all. so here are my problems:
1) once im in the activewindow, how can i copy the sheet it has in it, since i do not know what the sheet is called, and also i should store the sheet name in a variable so i can reference it later
2) how can i switch to the other window without knowing what its filename is
See Attached with info below. Simplified version: I have many spreadsheets with 3 columns of data, labelled PNumber then Fitting then Other Fitting. Saved as Title Number X (X = 1 - 52). I have another spreadsheet with 4 columns labelled Week Number, PNumber, F (for Fitting), OF (for Other Fitting). Save as Week Number X (1 - 52). When the week number 5 for example is put in column 1, I want my Week Number X spreadsheet to relate to Title Number 5.
When any PNumber from the Title Number X spreadsheet is put in, I want the F and OF columns to be automatically generated with the corresponding data from the Title Number X document. Note: If not poss put all in one spreadsheet
i am able to remove the title bar but unable to move the userform now.
View 2 Replies View RelatedIs there a simple way (without writing code) to have a chart title equal the file (workbook) name? For example a formula to write in the 'Chart Options' 'Chart Title' box?
View 7 Replies View RelatedI'm not getting all of my text into the Axis title "box" in a normal graph in excell. And I'm not able to use the arrow to "drag" the axis title to a larger area. Making the size of the text smaller is not a option, I would like the axis title area larger.
View 3 Replies View RelatedI have a worksheet which has two large tables. When one table flows onto another page, the users need to see the title i.e. Header of that table. How can I do this?
View 9 Replies View Relatedis there any way that i can remove the excel title bar and scrolling tabs so that the excel sheet do not resemble an excel document?
View 2 Replies View RelatedI am creating many graphs. I have already split my data so I can use CurrentRegion.I want each graph to have a different title using the text value of a cell which would be (6 * j - 5, 2) inside the For/To, but I can't get it to work no matter how much I tinker.This is the code as is without any of my attempts inside to clutter it up.
VB:
Dim p As Long p = Sheets("ForWeb").UsedRange.Rows.Count For j = 1 To (p - 1) / 4 ActiveSheet.Shapes.AddChart.Select ActiveChart.ChartType = xlLine ActiveChart.SetSourceData Source:=Cells(6 * j - 5, 5).CurrentRegion ActiveChart.Parent.Cut Cells(6 * j - 5, 1).Select ActiveSheet.Paste Next
I am working on a proforma statement, REFER THE ATTACHMENT
A B C D E F G H I J Q
1 jun'14 jun'14 jun'14 jul'14 jul'14 jul'14 Aug'14 Aug'14 Aug'14
2 beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold
3 foundation 4 10 11 3 15 13 5 16 18
4 Lipstick 4 10 11 3 15 13 5 16 18
5 Shimmer 4 10 11 3 15 13 5 16 18
6 Powders 4 10 11 3 15 13 5 16 18
7 Nail Lacquer 4 10 11 3 15 13 5 16 18
8 Eye Shadows 4 10 11 3 15 13 5 16 18
9
10
11 Total Purchase for june to aug 2014
12 Foundation ??
this is just an small sample of what i am working on i have got purchases, cogs and ending invenory for 2 years Products wise i want to add purchases for the particular product.
i.e. if for above data i want to find out the foundation purchased through june 2014 to aug 2014 what will be the formula
I would like to title columns based on values from other cells...
View 9 Replies View RelatedI want to customize my header title using the value of a cell within the spreadsheet. e.g.
I want the value of cell A3 to also be the header title. Is there a way to accomplish this? I am using excel 2000.
ROW 1 - list of headings
ROW 2 - blank cells that may contain an "X"
At the end of Row 2 I want it to find out which is the last column with an "X" in it, i.e. F2, and return the title of that column, i.e. F1.