I want to customize my header title using the value of a cell within the spreadsheet. e.g.
I want the value of cell A3 to also be the header title. Is there a way to accomplish this? I am using excel 2000.
I am building an interactive sheet to profile a number of divisions based on a summary sheet of about 1200 rows and 90 columns of profiling criteria
I have attached an example but essentially:
1. I would like to be able to select from a list a value which would also be a named range title
2. Have the range information transposed into a row
What works:
1. I can transpose the range information when I use the following formula
I used OFFSET(Governance,COLUMN()-MIN(COLUMN(HGovernance)),0)
The problem:
I cant get it to use a cell reference (i.e. When I select Governance out of a Drop down list of Finance, HR, Governance etc). Having to type in "Governance" to bring back governance range information is fine, but not great when I am trying to profile the Finance or HR division as it then becomes too manual.
I am looking to sort this file by "start date", from oldest to newest start date.
There is 3 groups, each of them is for 1 Student, I don't want the data inside the group files to be sorted, I want the whole groups to be sorted according to there "title" start date (there title is the writing with bold character and thick borders)
My problem raise is that I can not attach each title to its actual block/group.
The result I'm looking for is being able to sort (while groups are all collapsed/minimized) the groups according to there start dates that is shown in the always visible title, once sorted the whole groups will move along with there titles to the right order.
I need a code to do the following:
1. Search in row 1 until it finds the header text "Balance"
2. Check every cell in that column until the last used row of the spreadsheet is reached.
For every cell.
Is there a way to link a header or a portion of a header to a specific cell?
View 14 Replies View RelatedI want see if it's possible to take the name of the source workbook and put it in a cell in my destination workbook and then use that as the reference in formulas. The source document title includes a date that changes yearly, or in some instances changes entirely, and I want to keep the formulas in the destination workbook intact. I don't want to have to go to every instance where I have used the source workbook and change the title. Instead I would like to copy the source workbook title, paste it into the destination in the same cell and have that propogate the needed changes into the destination workbook formulas.
View 2 Replies View RelatedI want to put the title of the work book in cell A1
I have been using =CELL("filename",A1) but this returns
W:APMProdqty8882Prod 2011[8882wk4011.xls]shift reports
Is it possible just to return 40 ??
I am creating many graphs. I have already split my data so I can use CurrentRegion.I want each graph to have a different title using the text value of a cell which would be (6 * j - 5, 2) inside the For/To, but I can't get it to work no matter how much I tinker.This is the code as is without any of my attempts inside to clutter it up.
VB:
Dim p As Long p = Sheets("ForWeb").UsedRange.Rows.Count For j = 1 To (p - 1) / 4 ActiveSheet.Shapes.AddChart.Select ActiveChart.ChartType = xlLine ActiveChart.SetSourceData Source:=Cells(6 * j - 5, 5).CurrentRegion ActiveChart.Parent.Cut Cells(6 * j - 5, 1).Select ActiveSheet.Paste Next
I am working on a proforma statement, REFER THE ATTACHMENT
A B C D E F G H I J Q
1 jun'14 jun'14 jun'14 jul'14 jul'14 jul'14 Aug'14 Aug'14 Aug'14
2 beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold
3 foundation 4 10 11 3 15 13 5 16 18
4 Lipstick 4 10 11 3 15 13 5 16 18
5 Shimmer 4 10 11 3 15 13 5 16 18
6 Powders 4 10 11 3 15 13 5 16 18
7 Nail Lacquer 4 10 11 3 15 13 5 16 18
8 Eye Shadows 4 10 11 3 15 13 5 16 18
9
10
11 Total Purchase for june to aug 2014
12 Foundation ??
this is just an small sample of what i am working on i have got purchases, cogs and ending invenory for 2 years Products wise i want to add purchases for the particular product.
i.e. if for above data i want to find out the foundation purchased through june 2014 to aug 2014 what will be the formula
I have a lot of titles like "A Company - Strategy A", "A Company - Strategy B" and what I am hoping to do is strip out the part after the hyphen to the cell directly above. This is the case across about 200 columns, I'd imagine this is pretty easy?
The attached spreadsheet makes it very clear.
I have a very simple template which plots out means and standard errors of a treatment structure. The input is from an analysis of variance so I want to have the significance levels dispalayed in the title. This is simple for a single col of data but when there are more then one it doesn't use a cell to populate the chart title.
From the sheet I've attched the first and second chart have dynamic titles, if you change cell F10 from 0.364 to 0.001 the title on the second chart will change to "Input (**)" as it uses M19 for the title. The problem is that for the 3rd chart titled "CV*TR (NS)" any change has to be done manually (change cell F15 to 0.04 and this changes cell J43 to "CV*TR (*)".
example.xlsx
Why the heck every time I enter in to the "edit text" area of the chart title box in a chart in Excel 2010 and type "=B27" (without the quotation marks, and understanding the contents of "B27" has the text I wish to display) does this idiot thing simply display "=B27" (again, without the quotation marks)???
View 4 Replies View RelatedI am trying to make the contents of a cell into a chart title.I know I can do it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=tab_name!R2C1"
However, I am trying to use the same macro on several different tabs in the same EXCEL worksheet. Obviously, I can't have the tab name in the macro. But, I don't get a title at all when I try to remove it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=R2C1"
or
ActiveChart.ChartTitle.Select
Selection.Caption = "=A2"
Is this possible? I am (kinda new at) using EXCEL2010.
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:
View 2 Replies View RelatedI have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
I need to create a dynamic range based on cell between a header and footer cell. The header cell ( A8 ) will remain static, however, the footer cell starts at A10 and then will move down as rows are added.
View 9 Replies View RelatedLet's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies View RelatedExample.xls
Within my attachment, I have a grid of data, Row A are headers, and beneath, various corresponding dates, there are no row headers.
I'm trying to do a lookup so that column header is returned bases on a exact cell value.
Example: inputting 03/03/2014 will return "Week 3"
Week 1|
Week 2|
Week 3|
Week 4
07/07/2013
|14/07/2013
|21/07/2013|
28/07/2013
[Code] ......
I have a workbook containing amongst others a sheet each week of the year.
When I print one of these sheets I want to include the text value that is in B1 in the centre section of the header.
As there are a lot of other sheets in the workbook the code should check to make sure that there is a value in B1 and if not do nothing.
Is this possible?
My file is set up like this:
Deal Jan Feb Mar....... Dec
A 0 11 0
B 0 0 23
C 13 0 12
and so on
Meaning deal A got cash of 11 in Feb and B of 23 in March
For a certain month (which could change), I want to specify the most recent month of a payment and return the month
So in April, row A returns 2, Row B March and Row C March
I have a spreadsheet with a number of columns from a database export, where values in the column are either "TRUE" or "FALSE," Depending on whether or not the box was checked in the database. I am wondering if there is a way to populate a new cell with the text from the column if the value is "TRUE."
For example:
BOY
GIRL
John Doe
TRUE
FALSE
Is there a way that I could have another cell populated (I guess via function or macro) with "BOY," since the option for boy is true?
I would like to reference Cell values in my header/footer. I currently have the following code:
[Code] ......
The problem im having is that i would like to have multiple lines in my header/footer. Eg. i would like cell A1 to be displayed on the top left, and A2 displayed on the top left, but below the A1 value.
How can I do this?
I have a spreadsheet template whose Left and Center Print Headers are set to static values.
I would like to pass a single cell's data to the Right Print Header whenever I print the given spreadsheet.
I would also like the Right Print Header to refresh itself each time I print the sheet so that any possible change in the referenced cell will be accounted for.
I'm trying to do a vlookup but I want to be able to change the table array starting point depending upon a defined cell header. so
=vlookup(a1,sheet1!b1:c5,2,false) where b: would be defined by a header as
=vlookup(a1,sheet1!header name:header name+1,2,false).
So it will work much in the same way as match does for VLOOKUP
($A2,'Sheet 1'!$A:$FG,MATCH(AP$1,'sheet 1'!$1:$1,0),FALSE) but the array needs to change.
By doing this my vlookup will work automatically depending upon the header.
This is an easy one but I suck at Visual Basic... I have a routine wich adds stuff to a header in my worksheet CalcSummary:
Private Sub Workbook_BeforePrint(Cancel As Boolean)
With Worksheets("CalcSummary").PageSetup
.LeftHeader = Worksheets("CalcSummary").Range("l2") _
& Chr(10) & Worksheets("CalcSummary").Range("l3")
.RightHeader = Worksheets("CalcSummary").Range("l4") _
& Chr(10) & Worksheets("CalcSummary").Range("l5")
End With
End Sub
How can I edit it so that it works the way it is now, but ALSO adds the stuff on worksheet CalcSummary to the header on, say, Sheet1. I've guessed several things - none of which actually work
I have a table like the following where each ID can have no, 1 or multiple values associated with it:
Table1
ID>>>A>>>B>>>C>>>D
1>>>> >>> >>>10>>>
2>>>> >>> >>> >>>>50
3>>>5>>> >>> >>>>2
4>>> >>> >>> >>>>
I have another table that only lists IDs
Table2
ID
1
2
3
5
I want a VBA code such that if ID is in Table2, VBA looks for the matching ID in Table1 and if the matching ID found, it looks for ALL non-empty cells and if a non-empty cell is found in the row, it returns the value in the cell and the header to give something like this
Table3
ID>Column1>Value1>Column2>Value2
1>>>>c>>>10>>
2>>>>D>>>50>>
3>>>>A>>>5>>>>>>D>>>>>>>2>>>
ive added a filter, and on column A i want to find the first blank row under the header and type the word 'tech' and fill down to the last row populated against column b.
View 1 Replies View Related