I have made spreadsheet that calculates my total cost of making ice cream mix based on ingredient costs of two variables (Van_Gal, and Choc_Gal), for example 550 gallons and 750 gallons respectively. The worksheet calculates the total cost of making the Vanilla Gallons and the Chocolate Gallons. I’m not a VBA or Macro wiz, and now I’d like to Make a macro that will allow me to make a “table” of calculated costs associated with different assumed Vani_Gal and Choc_Gal amounts and then print the values; and then go down a row and print the cost of another amount of Vani_Gal and Choc_Gals until some preset end has been reached. For example:
Let’s say that I want to know what the tot cost and avg cost per gallon for various combinations of Vanilla and Chocolate Mix from 550 V and 750 Choc for various combos and have it increase in iterations of 10 Gallons (i.e. 560 Van and 740 Choc); Maybe I'd use a " loop" that repeats calculations and prints them for different combinations of Van/choc until 800 Gals Van and 500 gal Choc. Once I have a table of values, I could sort it and find an optimal production level (with the Minimum avg cost). how to make a macro that can crank out a table like this?
how can i extract all number values from a table column and list them on a separate worksheet? there are blanks in the table column, which have to be omitted.
Our system can create an SLK file showing customer open orders. It is ALWAYS in the exact same format. I created a macro to open this file, manipulate the data (convert text to numbers, convert text date to actual date, and a few other things) and then make a pivot table.
When I try to run it it gets hung up on the pivot table and the debug highlights the BOLD below:
I'm having difficulty trying to get the second file appended to the bottom of the 1st imported file. I get "run-time error '13' type mismatch". There is no difference between the two files. I'm thinking there is a problem with my range statement in the second file import, but this range works fine in other macros. Here's my code so far:
Ihave a pivot table that takes data from a table, groups the duplicate items and adds their values up - so it shows just one entry for each item. I now want to add a calculated field in there so that I can divide one of the fields into another.
I'm trying to insert a calculated row in a pivot table. I keep getting the error message 'Pivot table items can only refer to items in the same field as the calculated item'
Below is the format of my data:
Region(All) Sub Division(All) Sub Cluster(All) Cluster(All) A/C Level 3(All) A/C Level 1(All) A/C Level 4(All) A/C Level 5(All) Division(All)
Values A/C Level 2Sum of FY11Sum of FY12Sum of FY13 Net Revenues 100 200 300 Op Exp 50 40 30 Calculated Field50 160 270
Attached is a worksheet example, of my beauty salon with 5 therapists.
The input sheet - is the shhet into which I input data on a daily basis.
Weekly inc - This sheet shows the total that each therapist made in apivot table based on the input. The week numbers are 1 to 52 (or 53) depending on each financial year (07/08, 08/09 etc).
What I want to do is either have another pivot table or to add an calculated item to the weekly inc pivot table showing me how much commission each therapist took each week? This is to be done automatically by excel.
This commission is calcluated by using the target comm figures - E.G. Leanne's target is £480 - so she has to earn £480 a week before getting a commission. So if in a week she earns £500 - she will get a commission on £20 (£500 - £480). The commission is 10%, so she will earn £2 that week.
I want to calculate the difference between Budget and Forecast, in € and %. I was trying to use a calculated Item but whenever I place the cursor on the Budget, Forecast or Category cells and try "Calculated Item", I get an error message saying that the Item cannot be modified..
I have a pivot table with 2 row filters (dept and name) and then three columns - Year 1, Year 2. I need to add a calculated field inbetween Year 1 and 2 to show the variance in dollars from ( Year1-Year2) as well as an additonal a column that shows the percentage change between the tw o years . I know I can copy this over and add formuals in Excel but I need to retain the features of the pivot tables due to the 2 row filters?
I have and excel sheet that pulls data from an external source (ServiceNow) via MS Query.
From the exported data, I have the following:
Date opened (MM/DD/YYYY HH:MM:SS AM/PM) Date closed (MM/DD/YYYY HH:MM:SS AM/PM) calendar_stc (this exports in seconds, such as 136) (this equals date closed minus date opened for each record) assignment group
From this export, I'm trying to make a pivot table to show the average calendar_stc per assignment group, per month, per year; but in hours, not seconds.
I thought this was an easy process, create pivot to group row data by years then by months. Then add in assignment group to to the Rows as well. From there, I added to the values section of the pivot the calendar_stc. The default, of course, is to sum each row. But I need the average so I switched it to average. Now it is showing the correct average calendar_stc in seconds per group. To make it hours, I figured I could add in a calculated field. To do that I added the formula of =calendar_stc/60/60 for the calculated field. When I hit okay, it's giving me the SUM in hours for each row. Modifying the field settings to average does not change the numbers. So I went back into the formula and modified =average(calendar_stc/60/60). And that is not working either.
Here is an example to show the math with my formula.
I have fields "Day", "Posts", "Impressions" in a pivot table and I need to create a new metric for the average Impressions per Post. Ideally, this new metric should function just like the other fields in the pivot table, and not just static, because I'd like to break it out not just by Day, but also Time, etc.
Day Count of Posts Sum of Impressions Impressions Per Post
I am trying to create a dynamic pivote table that can be update using a value in a cell. I can get everything updating and working correctly except I am unable to remove the one calculated feild from my pivot table. I am able to remove all other fields without problem. Code below: (lines 13 and 14 is the code that i cant get to work)
Private Sub CommandButton1_Click() Dim dt As String Dim dt2 As String On Error Resume Next dt = Sheets("Executive Summery").Range("M1") dt2 = dt & "2"
I am trying to calculate a ratio for Hours per Ticket by month. I have a pivot table that COUNTS tickets and SUMS hours per month. I was hoping to create a calculated field to the jist of COUNT(Tickets) / SUM(Hours), but this does not work because calculated fields aggregate data.... I was hoping to keep it all in a pivot table so that I can still use slicers.
I have cut down my problem to its simplest form - in the real world my spreadsheet is significantly more complex but the attached spreadsheet demonstrates it nicely!
The data is straightforward. PT1 shows the data without a calculated item whilst PT2 is the same PT but with the addition of a calculated item for GP (i.e Sales - COS). Unfortunately adding this has resulting in the PT growing and adding "ilogical" combinations of data that didn't exist in the source data.
In my current project I have "cheated" by using a helper column and filtering on this using the Worksheet_PivotTableUpdate event to hide the unwanted rows but surely there must be a way of removing them "properly".
Another problem, and I guess this is just the way it is, is that my PT takes ages to calculate presumably becuase it is calculating this formula for every combination of values?
I got a macro to copy and paste values onto another tab within my worksheet. I have a lot of data and currently takes about 30 seconds to calculate and paste. Not sure if its an issue with my macro or with my computer (Mac - Excel 2011).
Here is an example of my macro:
Sub SimulateWeek() If Range("AdvanceWeek").Value = "Week 1" Then Range("Week1B").Copy Sheets("Schedule - Results").Range("C2").PasteSpecial Paste:=xlPasteValues
[Code]....
(this continues on until 'ElseIf Range("AdvanceWeek").Value = "Week 31"....etc). So you can see I have the same code repeated 31 times.
I have a Table with 2 columns "Due Date" and "Completed Date". The pivot table from the table gives the count of each column. I want to have a calculated column giving the % complete, ie. "Count of Completed"/"Completed Date"*100. When I attempt to create this formula (using Pivot Table Options > Fields Items and Sets > Calculated field), I get a DivZero error, even though both columns are not zero. How do I create such a calculated column?
I have an issue with a calculated item in my pivot table, because in the totals and subtotal it shows the sum of the column but I want to show the formula that I've specified to the calculated item.
For example, in the attached file, I have in rows the field "name" that has four values (A,B,C,D), in columns the field "Groups" that has "G1" and "G2". I add in the rows the calculated item "G1/G2" that has the formula G1/G2. The problem is that in the total the column "G1/G2" doesn't show the division of the total of "G1" and "G2".
Layout: Rows: City, Restaurant, Cashflow Column: Date (Month/Year) DataField: $Amount
"City" might be 7 cities "Restaurant" may be 32 restaurants, some in some cities; but not other "CashFlow" can be either "Revenue" or "Expense"
The layout of the Pivot table is nice, only shows the Rows where a State, Restaurant, and CashFlow entry exists for at least one Date on that row. And there are no extraneous rows for combinations that don't exist.
Now.... the trouble...
I added a Calculated Item, "Profit" which = "Revenue" - "Expenses". Now, every possible combination of State and Restaurant appears in the pivot table displayed. Only the "Profit" (calculated item) is shown for the previously hidden rows; and of course it's "$0.00" since there are no "Revenue" or "Expense" entries.
How can I get the Pivot table to not display the results of a Calculated Item row, when there are no entries otherwise for that row combination?
Is there a way to condition the Calculated Item to not calculate if there are no data entries in the addends for a particular combination?
I believe that I am finally getting the hang of pivot tables and VBA ... pretty nice. Now for my latest frustration - calculated fields.
I have a pivot table created which compares two years of data. The problem seems to be that this data is from the same data field (PINSAL) even though it shows in two columns (year 2007 and year 2008).
1 - I need to subtract the 2007 figure (column C) from the 2008 figure (column D) in a calculated field called DollarVariance
2 - I need to divide DollarVariance into the 2007 figure to create a calculated field called PercentVariance
This seems easy to do if I had two different variables used to create the 2007 and the 2008 data but it is the same datafield. Can I use column letter? Can I use the column name assigned by the pivot routine (12 - 2007 and 12 - 2008)?
I am trying to use a summary field in the pivot table in a new calculated filed, but am unable to do so. Let me first describe the context so its easier to understand:
I have a collection of customer purchase records, which look like the following:
Customer Name, Customer ID, Purchase Amount, Activation Date ------------------------------------------------------------- John , 100 , $150 , 2011-04-01 17:07:50.0 John , 100 , $250 , 2011-04-01 17:07:50.0 Paul , 101 , $125 , 2011-08-20 11:10:27.0
I have several 1000 records like the above and I need to create a summary report which looks like:
Customer Name, Total purchased, Activation date, Avg monthly purchase ----------------------------------------------------------- John , $350 , 2011-04-01 , $175
The average monthly purhcase needs to be calculated based on the date of report generation. So in the case above, the average is calculated as of 2011-06-01.
In order to generate the report above, I created a pivot table with "Customer Name" in the "row labels" section and "Pruchase amount" and "Activation date" in the "values" section of the pivot table. When I try to calculate the "Avg Monthly Purchase", I'm running into the following problems:
1. The activation date is not being displayed as a date, but instead shows 0, when I set the value field settings to "Min"
2. I tried to create the "Avg Monthly Purchase" as a Calculated Field and then use the "Sum of Purchase Amount" field that the pivot table calculates. However, I'm unable to reference the "Sum of Purchase Amount" field in the calculated field.
I have a pivot table listing different company names in the first column under 'row labels' and there are calculated fields, a count and an average in columns B and C respectively. Is it possible to insert another field in column D that calculates the difference between values in column B and C (even though they are calculated fields themselves)?
The other option would be how to set up conditional formatting to always take on the appearance of Column K of the pivot table. Thus, this calculated section would always appear as though a part of the pivot table and would adjust based on any pivot table items being expanded and collapsed.
I created a custom formula for a pivot table.the existing columns are weekly averages.I made a formula to calculate the average of 5 individual weeks.But when one of the value is blank.Blank cell is considered as zero.and hence the final average is wrong.
Worksheet A contains two columns, that maps individual operations to their unitary cost: COLUMN 1 = a list of operations COLUMN 2 = the cost associated with each operation.
I can do a vlookup on this worksheet to retrieve the cost of each individual operation.
On another worksheet, I have a pivot table with a field that produces the sum of operations performed by type of operation, eg.
operation 1 was performed 5 times operation 2 was performed 7 times operation 3 was performed 4 times
I want to add a calculated field in the pivottable, that would output the total cost per operation. The formula for the calculated field in thepivot table would be = operation * vlookup("name of operation","range for lookup table",2,0)
... unfortunately, "references, names and arrays are not supported in pivottable formulas".
I have a Pivot table that pulls the Avg of two fields for two months, see example below.
Avg Gross $ Avg Net $ Jan 2014 20 10 Feb 2014 30 20
sample 1.png See sample attached.
The Avg Gross and Net is shown by going into the values and selecting "Summarized value by -> Average".
On the right side of this Pivot, what I wanted to do is to show a Avg Gross to Net $ in this pivot. So the formula should take "Avg Gross $" - "Avg Net $" = Avg Gross to Net $.
I am having trouble calculting this new field in the pivot table using a calculated field because the Calculated field pulls the variables from the existing field list and there isn't a field called "Avg Gross/Net"....I need to find a way to calculate the Avg Gross to Net into the Pivot table so I can pull a pivot graph out of it.
I have a set of sales data and need to create a run rate which is simply = Total Sales/Selling Day
Selling day changes most days.
I put the calculation into my pivot data but it's summing up, (instead on 12 I get 720) so I changed this to Average so I get the right figure in the Pivot but when I then use this field, it doesn't use the Average amount, it uses the summed figure.
