Extract Number Values From A Table And Make A List
Aug 9, 2013how can i extract all number values from a table column and list them on a separate worksheet? there are blanks in the table column, which have to be omitted.
View 14 Replieshow can i extract all number values from a table column and list them on a separate worksheet? there are blanks in the table column, which have to be omitted.
View 14 RepliesI have used the formatting option to make numbers that once appeared as 1, 2, 3, 13, etc into four digit numbers, to appear as 3001, 3002, etc.
The problem is, I have other data whose original values are the 3000 formats, and Excel won't combine the two or sort them correctly.
Is there a way I can format it to change the actual value?
I have made spreadsheet that calculates my total cost of making ice cream mix based on ingredient costs of two variables (Van_Gal, and Choc_Gal), for example 550 gallons and 750 gallons respectively. The worksheet calculates the total cost of making the Vanilla Gallons and the Chocolate Gallons. I’m not a VBA or Macro wiz, and now I’d like to Make a macro that will allow me to make a “table” of calculated costs associated with different assumed Vani_Gal and Choc_Gal amounts and then print the values; and then go down a row and print the cost of another amount of Vani_Gal and Choc_Gals until some preset end has been reached. For example:
Van_Gal; Choc_Gal;TOTOutput;avg cost
550; 750; 1300; $4,000.00; $3.08
600; 700; 1300; $4,250.00; $3.27
Let’s say that I want to know what the tot cost and avg cost per gallon for various combinations of Vanilla and Chocolate Mix from 550 V and 750 Choc for various combos and have it increase in iterations of 10 Gallons (i.e. 560 Van and 740 Choc); Maybe I'd use a " loop" that repeats calculations and prints them for different combinations of Van/choc until 800 Gals Van and 500 gal Choc. Once I have a table of values, I could sort it and find an optimal production level (with the Minimum avg cost). how to make a macro that can crank out a table like this?
how do i make a number list. i want to start at 8000 then i want excel to auto generate up to 9000. it will take ages to sitt and punch 8000 8001 8002 ......
Next problem
how can i sett that cell A1 is connected with B1. so when i sort by number it follows. Example:
See attached file with a smaller sample of the 1667 row table of data I am working with. What I am looking to do is make a list on another sheet of each every line with a county and have the corresponding Township and range with it. So if I have a cell and I select Audubon county, I would like a list to populate that has the 12 lines of Audubon county in column A, and the Township in column B and the Range in column C.
Excel Rate Example.xlsx
I'm trying to extract a list of names from an Excel 2010 table based on two criteria, thus:
=IFERROR(INDEX(Database[FullName],AGGREGATE(15,6,ROWS(Database[Age]-ROW('Database'!$A$2))/((Database[Age]>1.8)*(Database[Age]
I have a worksheet which is working nicely, but I want to extract a couple of the most important values and display them in the whitespace on the right of the table. Because of their importance I would like to do so in a larger font than is used in the rest of the workbook, but without increasing Row height to accomodate it. Essentially I'd like to do a center across selection, but vertically not horizontally but can't find a way to achieve this.
View 1 Replies View RelatedI download a daily inventory file from my supplier.
.
I sell only selected products from that file.
.
I would like to use a list of the product part numbers of the products I sell on sheet 2 (Inventory) and have all the results from sheet 1 (ProductFeed) built into an expandable table on sheet two including all the parts numbers (expandable because I will add or delete part numbers from the list) I have listed and not just one part number but several.
.
Second issue: the download file contains part numbers in column "A" with variables like 418, 418_color, 418_size etc.... I would like all part numbers that begin with the number 418 and the ones that contain the variable added to be listed in the new table so I will get a list of all part number 418 and the variables which include 418 in them.
.
I want to return the results of the whole row(s) of the matched data as well in the new table.
.
I have attached a file of the working data that I have with the data I will use although the ProductFeed will change daily which I intend to copy and paste into the table each day.
How can I extract non zero values from a list of values
View 9 Replies View RelatedI have a list in Column A" Job List" (the amount of entries will change based on job openings). There are some cells that are blank; randomly throughout. I need to create a new Column B "Current Jobs List" with no spaces. I have to do this weekly and each time I update my "Current Jobs List" from the new data in the "Job List" without any spaces.(I do not want to just do a filter) .
View 6 Replies View RelatedI have a Pivot Table with pivot fields and data. I would like, through VBA, to get the list of values that can be chosen from a given pivot field.
For example, a list would be Product1 / Product2 / Product3 .... I would like to read that list and put it into a drop down list in a form.
GOAL: I have several Pivot tables on the same sheet with similar fields and I want through macro to allow the user to update them all with one click.
I want to print one sheet for each of the values in a page field drop-down. I can do this by supplying the values individually (code below) but would rather determine the list of values dynamically. Can this be done?
Private Sub pbPrintAll_Click()
Dim cix As Integer
Dim Ctrct As String
cix = 3
While (Sheets("Database"). Range("B" + Trim(Str(cix))).Value <> "")
' Get value from database sheet
Ctrct = Sheets("Database").Range("B" + Trim(Str(cix))).Value
' Set CurrentPage value
Sheets("Customer P&L Pivot1"). PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = Ctrct
' Print formatted sheet
Sheets("Customer P&L").PrintOut
cix = cix + 1
Wend
' Reset Current Page value
Sheets("Customer P&L Pivot1").PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = "(All)"
MsgBox "Prints sent to printer."
End Sub
I have a very large excel data file, which I want to analyse using pivot tables. The problem is that while most of the columns are headed with the variable name (e.g. country) and have the list of variables displayed under that heading for each observation (e.g. Italy), the years are spread across the columns - i.e. the heading for column X is not "Year", but is 2003, with the next column being 2004, etc.
Is there a quick way I can re-arrange the data so that the layout is consistent and so that I can use it for pivot tables? I have way too many observations to do this by hand.
I am using Excel 2003 SP3. How does one extend the the number of values in a list box and retain the same name to be used in the Data / Validation / Settings / Source entry? The only method I see is to extend the list of allowable values and give the longer list a new Name.
View 2 Replies View RelatedI'm trying to place a pivot table in an existing sheet in order to have a list of names next to a P&L. I've got several criteria to filter the names, but when I apply the filters to the pivot table, not all the people show up. The weird thing is that the total at the bottom of the pivot table, which is a simple sum of time in a given month per person, calculates the correct number as if all the employees are there.
When I do the same table in a fresh sheet, in the same file, it shows correctly. It's only when I try to put the table in an existing sheet that it abbreviates the list.
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
View 9 Replies View RelatedI need to count the unique values in a list based on another value. i.e.
AB ___ Jones
AB ___ Smith
BC ___ Henry
AB ___ Jones
BC ___ Brown
BC ___ Henry
AB ___ Tomkins
For all the AB's in column 1, I need a formula that will give me all the unique names from column 2, in this case 3. I've tried adapting:
=IF(LEN(June!D5:D100),SUMPRODUCT(1/COUNTIF(June!D5:D100,June!D5:D100)))
but haven't been able to get it to work.
i have a pivot table an extract of each data contained in this table.
[img]Count of NAMdate
SERVICENAM12-oct10-déc11-décGrand Total
Commercial-lauralaura11
Commercial-laura Totalgh11
custody-jonathanjonathan112
k11
custody-jonathan Totalgh1113
settlement-ludovicludovic11
settlement-ludovic Totalgh11
SPQC-elodieelodie112
SPQC-elodie Totalgh112
Grand Total1337
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
unique list.xlsx
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies View RelatedHow to (by vba or whatever):
1) convert the Matrix data into the data table, and;
2) convert the data table into the matrix data
Matrix data (example)
share Ashare Bshare C
springsellholdbuy
summerbuybuysell
autumnsellholdhold
winterholdsellsell
data Table (example)
springshare Asell
summershare Abuy
autumnshare Asell
wintershare Ahold
springshare Bhold
summershare Bbuy
autumnshare Bhold
wintershare Bsell
springshare Cbuy
summershare Csell
autumnshare Chold
wintershare Csell
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
I have two data columns: the first is a list of the last 100 calendar dates, and the second is an ON/OFF (or 1/0 if you prefer) value corresponding to each date. If the last value in the second column list is ON, I want to find how many continuous days the value has been ON for. If the last value in the second column is OFF, I want it to return a zero. Note that in the 100 day span of data, the value may switch between ON and OFF several times, but I only want the continuous, uninterrupted ON days at the end of the date range.
View 8 Replies View RelatedBasically I have a giant list (50,000+) of area codes (like 312, 216, 517, etc...) and I would like to make a new column right next to that, which takes those area codes and transcribes them into states so it would be (IL, OH, MI, etc...)
I have a table on the 2nd page of my excel workbook which has every single area code listed in column A, and in column B it has all the state symbols. I got it from here: .....
A
B
c
d
[Code]....
So the data I put in Is Cells A to D the reast are calculated for me. so for example E2 is looking down column D to see if the number matches the number in A2, If any of them do it will put the name in the corresponding cell in E2 (Or you ca use a different cell if you prefer) so in this case D3=A2 so B3 is the answer also in the cell next to it I need whatever number is the cell next to the answer so in this case C3
I have a list of 200,000 e-mail addresses in a excel document in column A. What i am trying todo is find all the duplicate e-mail addresses within the list that appears more than four times.
I have tried this forumla in colunm B so it lists how many times the record appears: =countif($A$2:$A$244270,A2) which works fine and then a number appears next to each record. Then i pressed the sort filter to arrange all the records in number order so all the 5's are at the top of the worksheet but that does'nt always list them in the correct number order.
Basically all i want todo is find all the records that appear in my list more than five times then make a list of just one of those 5 records so i can remove them from my e-mail system.
Basically I have a giant list (50,000+) of area codes (like 312, 216, 517, etc...) and I would like to make a new column right next to that, which takes those area codes and transcribes them into states so it would be (IL, OH, MI, etc...)
I have a table on the 2nd page of my excel workbook which has every single area code listed in column A, and in column B it has all the state symbols. I got it from here: [url]
How would I go about making this new column on page 1 of my workbook which takes all the area codes I have and makes a brand new list of the states by looking up the area code/state table I have on page 2 of the workbook?
i am looking for excel custom number format for 0 (zero) number that make center alignment..
for example ;
sample (when type 0 (zero) number)
after custom number format
- (right alignment)
- (center alignment)
how make center alignment with custom number format for 0 (zero) number..
I recently moved to Central America and now am working on models that are either in $ or in the local currency (Q). I do not want to change my default currency value in the regional settings of the control panel because it is more convenient for me to stay in $ but it is a pain everytime I want to set a worksheet in Q and not in $.
So, I am wondering how I can change the default values in the currency drop-down list on the Home toolbar under Numbers in Excel 2010.
Currently, it gives me the change to apply the following currencies:
- $ English (US)
- £ English (UK)
- € Euro (€ 123)
- ¥ Chinese (PRC)
- fr. French (Switzerland)
Instead of either the £, ¥ or fr., I would like to have listed the Q, my other frequently used currency.
I have a list of names in column A, don't know how many different names but for sure some of them repeats in different cells of column A.
A1 = NAME_1
A2 = Alan
A3 = Ben
A4 = John
A5 = Alan
A6 = Kevin
A7 = Mark
A8 = Dominic
A9 = John
A10= Tom
A11=Alan
A12=Frank
How can I make aonther list in column B, which contains a list of name in column A without repeating. So that B1 = NAME_2, B2:B4 is exactly like A2:A4, then B5 = Kevin, B6 = Mark, B7 = Dominic, B8 = Tom, B9 = Frank.... and so on. Another question, which is very similar to the previous one. In the same column A, now I add an AutoFilter (Data > Filter > AutoFilter) in A1. A drop down arrow button will appear at the right side within A1. Click the down arrow and another box shows: Sort Ascending, Sort Descending, All, Top 10, Custom, Alan, Ben.... the rest of the data in Column A but each unique data will only shows once in that list. How can I copy the contents of that box?