MINIMUM IF Function Without Using Array
Oct 15, 2008Is there anyway I can do the below formula without it being an array formula?
View 2 Replies
ADVERTISEMENT
Average And Minimum Function In Array Formula
May 19, 2009Actually with the help of array formula I"m taking out Average, Min, Max value of ranges and I was omitting zero but the problem is occurring that if i have originally zero in my ranges then Average & Minimum function is not working properly.
View 8 Replies View RelatedMinimum Function In VBA: Find The Minimum Cumulative Cost In Week 0 Out Of The First Three
Jan 4, 2010Attached is a print screen. I'm struggling with using the min function in vba. I want it to find the minimum cumulative cost in week 0 out of the first three, and the copy the permutations of it (1,0 or 1, 1 , e.t.c.) to Week one column C & D of the model.
View 3 Replies View RelatedMinimum Non-zero Within Array Formula
Oct 31, 2008I have a load of (multiply duplicated) categories (in col G) and values for them (in col P). Each category has more than one value, but they should be in roughly the same ball-park. I want to rank the categories in a pivot table, by value, not alphabetically. So I wrote this formula:
{=MAX(P$2:P$10*(J$2:J$10=2)*(G$2:G$10=G2))}
(I also am only interested in entries for which there is a "2" in column J as shown)
This takes the category, finds all instances of the same category in col G and returns the max of all of them - so each row now has a "max value for this category" field.
This is all great, but what would work a lot better would be grouping them by the minimum value in the column, but of course when I do this I get a zero (from any one of the hundreds of non-matches).
I tend to get non-zero mins using small and countif but can't conceive how I would squeeze that into this formula.
Minimum Distance Calculation Of Geographic Coordinates Using Array
Jun 9, 2006I am working on two spreadsheets, one we shall call Target Sheet and the other Reference Sheet.
On the target sheet, I have a set of 200 geographic coordinates longitude and latitude (in decimal degrees). Each pair of coordinates coresponds to a geographic site.
On the reference sheet, I have a set of 900 geographic coordinates longitude and latitude (in decimal degrees). Each pair of coordinates coresponds to a geographic site. Note that of the 900, 200 are the same from target sheet, other 700 are different sites.
Using the spherical law of cosines, I can calculate the distance between a set of coordinates on target sheet agianst a set of coordinates on reference sheet. This allows me to see the distance from one geographic site, to the other. This was easy. The formula I use is as follows: ....
IF Using A Minimum And Maximum Function?
Aug 5, 2014I have 3 columns 1st one has numbers that reference a wellbore.
2nd have a depth
3rd has a number value (a mud weight) volume
Well API example Depth Weight
42050102600000 10000 10.2
42050102600000 9500 9.2
42050102600000 6500 8.5
42050105000000 12000 11.0
42050105000000 7500 6.0
42050105000000 10200 9.5
42050110100000 8000 8.0
42050110100000 9500 9.2
I want the formula to give me based on the well API number the max depth and the weight associated to that max depth. And the minimum depth and the weight associated to that minimum depth. I'm not sure how to say it in a formula. I don't want to use VBA.
Ignore Zero In Minimum Function
Dec 10, 2009To highlight largest and smallest values in a worksheet I have used large and small function to calculate and then and index to highlight name attached
View 2 Replies View RelatedReturning A Text In A =minimum Function
Dec 11, 2009I have 3 columns of numerical data. In my fourth column, I would like to return the minimum value from the 3 previous columns (=min). However, instead of returning the lowest number, I would like it to return the column title (=text) of the lowest number. I haven't been able to locate a function that does this.
View 4 Replies View RelatedUsing IF Function To Calculate Average Minus Maximum / Minimum?
May 1, 2014 I am trying to automate a process involving a Grubb's outlier test and calculating averages/stdev of a set of numbers. I have the data in one column and have calculated the average/stdev/%CV of that data. I have also added a formula to calculate Max/Min outliers of that column of data. Then there are cells with IF statements that display either "yes" (for an outlier present), or "no" (if no outlier is present). What I would like to do, if it is feasible, would be to set up formulas to recalculate the average/stdev of the column, taking into consideration either the presence or absence of outliers.
Here is what I invision(cells are for example purposes)
=IF((M9 = yes, Avg(H2:H40)-max(H2:H40)),M9 = no, avg(H2:H40))
So it would calculate the average without the outlier if the outlier "yes" was present, or just calculate the average if "no" is present.
I would also do this with a minimum outlier as well, but i can set that up if this first one is possible.
Find Minimum SUM If No Minimum Number In Row
Dec 24, 2009I want in A1 to find minimum SUM if no minimum number in row.
Here is example attached: ...
MINIF Function; Find The Minimum Value Of Column A If There Is Anything Greater Than Zero In Column B
Jul 29, 2006I want to find the minimum value of column A if there is anything greater than zero in column B. I tried this formula (simplified): MINIF(B2:B6,">"&0,A2:A6) And it gives me the # NAME? error
View 6 Replies View RelatedIf Minimum Below Zero Then Return Minimum
May 19, 2007I have had a lot of luck finding what I need from the search areas, and I even found some information on the formula I am trying to build. The problem is I don't understand it and I need some help. First let me set it up for you. (I do not know the formula)
If cell L125 is has a value >0.00, I need to locate the smallest value the range of cells C125:F125, I then need to subtract L125 from that number, otherwise enter nothing.
This really has me baffled. I tried and I tried but it will not find the smallest value then subtract L125.
Array Concatenate Function VBA
Aug 8, 2012I use a existing code and want to add the Concatenate in the code.
VB:
Sub Subtotal()
Dim myAreas As Areas, myArea As Range, x As String
Dim y As Long
Worksheets("INVOICE_hulp").Activate
Range("Q1").Select
[Code] ....
The array sum function works but Concatenate not. In Excel I get the formula Concatenate(H2:H3) in stead of Concatenate(H2,H3). What should I change to get the code working?
Printing Array From Function?
Sep 3, 2012I want to create a function in a module that will read an array from sheet1 preform an operation on it then return the result to the spreadsheet in a defined amount of cells in this example 8.
In Module1:
VB:
Function func1(ByRef arrayA())
Dim arrayB(8)
For k = 0 To 7
[Code].....
How does the resultant arrayB get populated onto the spreadsheet?
Using Countif Function For Certain Array
May 2, 2014I want to use the countif function for a certain array. The range is set by another cell which is made up out of a percentile of an entire row.
The problem is is that excel doesn't see the value it displays so i continuously get a value of 0 in the countif cell. If i fill in the range by hand, which is exactly the same range as the outcome of the percentile the countif cell does give the correct value.
So in short the problem is i guess that the countif cell does not recognize the value because this value is made up by a formula.
Function That Returns The First Value In An Array
Jan 24, 2007I am working on a Monthly Vehicle Spread Sheet. One of the outputs I am trying to achieve is an automatic calculation of Mile Per Gallon. To do this, I need to know if there is a function that will return the value of the first entry of a group of cells.
In calculating the miles per gallon, I need to subtract the first gallon amount entry of the total gallons in the month, then divide that number into the difference of the mileage in the month recorded when the vehicles fueled up.
Assigning A Function To Array?
Feb 21, 2014I am trying to write a code for simulating a stock price using geometric brownian motion. I have the function part down as follows:
Public Function SimStock(Initial_Stock_Price As Double, _
Expected_Return As Double, _
Volitility As Double, _
End_Time_Days As Double, _
Number_of_Steps) As Double
SimStock = Initial_Stock_Price * Exp((Expected_Return - Volitility ^ 2 / 2) * (Number_of_Steps / End_Time_Days) * NRnd2() * Sqr((Number_of_Steps / End_Time_Days)))
End Function
Now what i need to do is to apply this to an array. so that when i run the sub it will simulate prices from today up to some number of days that i specify. This number of days will be equal to "End_Time_Days" which is part of my function. Furthermore the simulation has to be such that it uses the above formula for the first entry but then replaces "Initial_Stock_Price" with the result of the preceding entry in each subsequent entry.
MEDIAN() As Array Function?
Oct 11, 2005Is it possible to submit the MEDIAN() function as an array (ctrl + shift + enter)?
I.e., I would like to submit a function similar to this SUM() function:
{=SUM(IF(("a"=$A$1:$A$7),$B$1:$B$7,))}
However, when I submit
{=MEDIAN(IF(("a"=$A$1:$A$7),$B$1:$B$7,))}
it does not give me the intended result.
Sum Function For Array Not Working
Feb 27, 2012For some reason my array called "PriceSum" is not getting load with values or not being summed. I am not sure if it is because I am trying to load a value with a decimal in it or not.
For logic purposes:
lastrow = 2
Stock = Banking
Cell "W2" = 5
Cell "X2" = 71.84
Cell "U2" = Bought
Cell "V2" = Banking
Code:
Private Sub Purchase_Click()Dim MyArray As Variant
Dim x As Integer
Dim t As Integer
Dim lastrow As Integer
Dim QuantityArray(0 To 1000) As Variant,
[Code] ...........
Looping If Function Through Array?
Jan 9, 2014I have a big macro that runs whenever there is a change made. I'm not gonna link it all because I don't think that would be useful... This macro does:
1. Disables Events.
2. Removes Protection
3.Calls some macros that check a few values and change a few cells.
4. Activates events.
5. Hides or shows ranges of cells depending on the results of the called macros.
6. Reactivates protection.
As well as the cells the called macro changes, there is a column of True/False results stretching from AE16 to AE491 with several blanks in the list as well. (All of this is decided upon a different macro that isn't linked with the change.) I want a loop that will read the True/False column and if it finds a false, make 8 buttons invisible.
I tried putting this code between Step 5 and 6 of the macro.
Code:
Dim J As Integer
J = 16
Do
[Code].....
This isn't working at all... I was thinking if there was gonna be an issue then it would be the opposite where it stops the buttons appearing all together but even when there are falses and I am changing things it doesn't seem to make a difference.
Using Large Function In An Array
Jun 8, 2007Column C contains the names of real-estate brokers.
Column E contains the colors of the homes for sale.
Column Q contains the values of the homes.
I want to return the sum of the 50 most expensive homes that are yellow and for sale by Century 21.
I'm familiar with array formulas, and with the large function. I just do not know how to incorporate the large function within the sum/array formula.
Usually Array Formula But Function
Oct 10, 2008I'm just getting into functions, so please bear with me on this as I start to understand how they really work. I do have the VBA and Macros for MS Excel book which has been a great help!
Normally on this I would use a simple array formula to gather a total calculation from a timesheet, but in this case there can be numerous timesheets to add this up.
Hours would be recorded on a sheet with both a client and a task selected. I also have a summary sheet to show clients against tasks... adding all the hours from each timesheet.
If it were from a single Timesheet (possibly creating a single one of these for all sheets is an option?) I would be able to use the following array formula:
=SUM(IF((Timesheet1!$F$8:$F$22=C$5)*(Timesheet1!$G$8:$G$22=$A9),Timesheet1!$D$8:$D$22))
Timesheet1 Column D = hours
Timesheet1 Column F = clients
Timesheet1 Column G = tasks
Row 5 (starting Column C) = clients in summary sheet (across top)
Column A (starting Row 9) = tasks in summary sheet (down side)...........
Function For 2-dimensional Array
Feb 27, 2007I am trying to write a public function that fills a table for a 2-dimensional array and am having trouble with my named ranges. The x-axis is based on years (range F2:O2) and the y-axis is a q_factor (range E3:E23) so the data range would be (F3:O23. The following outlines my logic:
Public Function bondValue(years As Range, q_factor As Range, z As Double)
Dim nRow As Long, nCol As Long
Dim bondPort As Range
nRow = q_factor.Rows.Count
nCol = years.Columns.Count
sumTau = 0
Function To Calculate IRR Of An Array
Jan 15, 2008I have written the code below. But it didn't work. In my opinion the error is most probably caused by irr worksheet function. Because the code is actually bigger and I tried it all part by part.
Option Base 1
Dim i As Integer
Dim j As Integer
Dim counter As Integer
Sub General() 'Makes general calculations
Dim Cash_Flow_Project_Entity(49) As Variant 'Toplam Yatırım Nakit Akımı
Dim FIRR(49) As Variant 'Yearly FIRR
Analysis_Period = Worksheets("Veri"). Cells(15, 5) 'Takes " analysis period" from "Veri" Worksheet
End Sub
Function To Write An Array
Jun 20, 2008I have the following assignment to do, problem is I'm new to arrays and functions in VBA and nothing is working for me, i get errors no matter what i try, (for example i don't know how to feed the array to the function, and it won't let me write a range to an array)
5.A) Write a function that takes a 2D array of doubles, a single cell range, an optional cap and an optional floor.
B)Write the array on to the sheet with the single cell range parameter being the location of the top left of the array on the sheet. When writing the array to the sheet, for each value in the array where it is below the floor put the floor on the sheet, where the value is above the cap put the cap value on the sheet, otherwise display the original value. The input array should not be modified.
All code should be what you consider production quality.
Dim topleft As Range
array1 = Range("B8:C18").Value
'array1(1, 1) = 2
'array1(2, 1) = 3
'array1(1, 2) = 6
'array1(1, 3) = 9
'array1(2, 2) = 4
'array1(2, 3) = 5
Obtain The Array Values Of A Function
Jan 25, 2013How can I obtain the array values from a function?
For example: Those steps were made by cytop to split a text (btw it works perfecet!!), I just added Function splitText(strSplit As Variant) As Variant ... End Function
VB:
Function splitText(strSplit As Variant) As Variant
Dim datosColumnaIncio() As Variant
Dim iTemp As Integer
Redim datosColumnaIncio(Len(strSplit) - 1)
For iTemp = 1 To Len(strSplit)
datosColumnaIncio(iTemp - 1) = Mid$(strSplit, iTemp, 1)
Next
End Function
So I want to know if its correct like that:
VB:
Function splitText(strSplit As Variant) As Variant
Dim datosColumnaIncio() As Variant
Dim iTemp As Integer
[Code] .....
So when I call the function:
VB : MsgBox splitText("F4")
It throws an error message :s what is wrong or how can I get the array values of a function ???
Use SUM Function With Two Arrays / One Array To Be Negative Value?
May 12, 2014I am trying to subtract two values, which are calculated from arrays. Here is my actual code:
[Code] ......
If I remove the "-", I get the sum of both arrays as expected. If I include the "-", I get the "#VALUE!" error message.
Using An Array As Input To A Custom Function
Apr 22, 2009Does anyone know why you can't specify an array, like an array of Doubles, as an argument or input to a custom function? For example:
View 14 Replies View RelatedArray Function Test Not Working
Aug 7, 2009Ok, I'm sure that there is something really obvious here, but I'm just not seeing it....
Test Data starting at cell A1:
INDEX SMALL ROW Array Function
Dec 9, 2009Please see the attached worksheet for details. I would like the array function to search for instances of the word "FALSE" in column E and return the values of columns A:D when a match is found. I have done this successfully when the lookup value is a value in the first column of the range, but cannot seem to do so when the lookup value is in the last column of the range. I have received a #NUM! error each time.
View 9 Replies View Related