I have a worksheet (downloaded from Paypal) and the columns I need to sum are of varying length (sometimes 12 rows and maybe 200). I am having trouble finding a way to find the end plus one of the column to write the formula in.
I export data from another programme into excel and I wish to write a macro to copy the contents of columns G, H, I and J and paste it into columns A, B, C, D but starting at row 4. I then carry out various formatting tasks. I have written a macro that works for the copy and paste and the formatting but it only works when the data is the same length. The length of the data exported varies each time and so I am looking for some code that stops at a blank cell and copies the range above. I believe this uses xlup or xldown.
View 8 Replies View RelatedI paste in information in Columns A-E with varying lengths for each report that I need to generate (They generally range anywhere from 10-500 rows). I have formulas already in place in the first row of Columns F-L that need to be copied down as far as columns A-E go. I recorded a macro for this when I try to run the macro for another report with more or less row entries it copies down as far as the original recording was set. How do I make it so the rows will copy down just as many as I need and not some arbitrary number of rows? This is my first post so if any clarification is needed that's no problem.
View 3 Replies View RelatedI've reached a point in this macro where I'm stuck with NO clue how to achieve this, or even whether it can be done. In the Before sheet below, I need to bold the cells in H & I if the word "Total" is in G. I could probably manage that part, but here's the weird part: I need to add a formula to H & I of each row with "Total" in G to sum the numbers above it, from the previous total down to the current total. But there's no telling how long each range might be on a given report; from 1 row up to 8 rows.
THEN, in the second row below the end of columns H & I, I need to put a formula totalling all of the preceding Totals
I wonder if there might be a way to tell it to put a formula in H by each cell that has "Total" in G, with the formula summing or subtotalling everything from the cell in H that has data in F to the cell just above the "Total".
Attached File : Acct Activity.xlsx
I'm having difficulty allowing my macro to run in a more global environment with varying data-set lengths.
For example:
Though the following "copy" scenario works for me when my data set is contained within cells B2:B35:
Range("A2:A35").Select
Selection.Copy
It does not allow me to work with a set of data that extends beyond this--say to B50 or B60. Is there any way to allow this command, and others, to be a bit more flexible with my data set lengths?
My data is as follows, all in one cell:
10015200 US Government Bonds 18,369,423.52
10012301 US Government Bonds 10,232.21
There are many varying lengths of digits. I am trying split off the numbers
to the right of US Government Bonds into another column. Here is my
formula:
=RIGHT(A7,IF(ISERROR(FIND(" ",A7)),LEN(A7),FIND(" ",A7)))
My result is 9,423.52. Its not pulling the whole number.
What do I need to change in the formula?
I am trying to do a VLOOKUP using a list based on our Part numbers in Excel 2007. When I do a normal sort it groups the numbers 1 thru 9 by the number of digits, giving me multiple list of 1 thru 9. When I do my lookup it will not find the shorter numbers. Is there some way to sort these Part numbers in order regardless of the number of digits?
View 2 Replies View RelatedI have a column of data that contains suburb, state and postcode (zip code). I can extract the postcode quite easily using:
=RIGHT(H2,4)
However, sometimes there is one word for the suburb, and other times there are two or more words. Also, the state abbreviation contains either two or three letters:
MARYBOROUGH QLD 4650
BRAY PARK QLD 4500
TEA TREE GULLY SA 5091
Does anyone know of any code I could use to extract the three pieces of information into three new columns? (I.e. Suburb, State, Postcode)
I imagine the formula would contain some method of counting the number of paces; however, the number of spaces between each word may be more than one space.
Goal: To extract the barcode (numbers and letters between B/C: and , P/G) from the following string:
"Codec B/C: A01234567, P/G: 123456728912345"
Current Function: =MID(A1,(FIND("B/C:",A1)+5),(FIND("P/G:",A1)-14))
Problem: I need this function to work for barcodes of varying lengths. For example, in some cases the barcode may be 8 characters long and at other times the barcode will be 14 characters long etc.Below is a screenshot of how I have this currently set up in excel.
I have figured out certain formulas that can get me pieces of the text substring, I am having difficulty finding an all in one solution that will allow me to run a macro and automate this process due to the nature of variability of the # of characters in the text string. The category and what I need to extract is as follows (Michigan Missing Zips roll up I can deal with):
MWR - Illinois - HORIZONTAL LATHES
MWR - Illinois
MWR - Illinois - MACHINING CENTERS - HORIZONTAL & OTHER
MWR - Illinois
MWR - Illinois - MACHINING CENTERS - VERTICAL
MWR - Illinois
[Code] ..............
I am working on this report for data from 2007 to 2011 for multiple customers. I have two columns of data for each customer for each year. My ultimate goal is to get a total for both columns of data and insert it in the row right under the row containing the last year of data. Below is a sample of what my data looks like and what I want it to look like. Here is the data:
2007113565200812642520091125452010136215200722519620082342352009212584201023656220
11225648200734323420083135572009315315201031826720074256852008442953200
7518816200853224520095314912010524676201153891320106518462011
62412520077155452008717696200973247520107521212011719343
I want it to look like this:
2007113565200812642520091125452010136215Total886150200722519620082342352009212584201023656220
11225648Total13393252007343234200831355720093153152010318267
Total90217320074256852008442953Total68513820075188162008532245200953149120105246762011538913
Total145924120106518462011624125Total7597120077155452008717696200973247520107521212011719343Total1369280
The only part of the coding I am having problems with is the sum function for the different lengths of data. Below is the code that I have so far.
Code:
Sub Report()
Dim i As Integer
i = 3
[Code]....
I have a column of data where the seperate entities are divided by blank rows. for example: i need to calculate sum(G3:G15) then skip the blank row (G16) and calculate the next group, say sum(G17:G50) and export that import to a new worksheet.
The issue is that the column lengths vary from day to day so the blank rows will not be in the same position.
how to code VB to where when data is sorted a formula can be placed at the bottom a column to sum or average the above data?
I have tried relational positioning e.g
each time a row is created, integer n5 = n5 + 1
Application.CutCopyMode = False
ActiveCell.Offset(rowoffset:=1, columnOffset:=12).Select
ActiveCell.FormulaR1C1 = "=sum(r[" - " & n5]c:r[-1]c)"
ActiveCell.Offset(rowoffset:=0, columnOffset:=7).Select
ActiveCell.FormulaR1C1 = "=average(r[" - " & n5]c:r[-1]c)"
Application.CutCopyMode = False
n2 = ActiveCell.Offset(rowoffset:=1, columnOffset:=-19).Address
n5 = 0
Where n5 is augmented each time a row is created then set to 0 to count the next list
I have three columns, one column is time every two seconds with data associated that time, and one is time every minute with an associated tidal height.
I want to sort my data so that for every 2 seconds I have an associated tidal height for that minute.
eg:
what I have:
Time Time Tidal Height
(2 sec intervals) (min) (meters)
1:15:00 1:15 1.342
1:15:02 1:16 1.221
1:15:04 1:17 1.115
...
1:15:58 1:43 0.024
1:15:60 1:44 0.012
1:16:00 1:45 0.008 ....................
Say I am downloading a column of stock prices and it cannot be predicted precisely how many rows will be contained in each downloaded column.
The column is, however, always Column E.
Two formulas must be computed.
1) Last row with a price in column E / average (all rows, beginning with row 2 with prices in column E)
2) Last row with a price in column E / average (last 50 rows with prices in column E)
Can Excel manage the variable number of rows required for these formula, and if so, can somebody recommend how to write these formulae?
I'm trying to compare two columns of names that are different lengths. I need a formula that will return the differences. I've tried everything my nonanyltical mind can think of
View 5 Replies View RelatedI am half way through writing a bigger macro, but am stuck at this stage.
I need to copy from a block of data as shown:
However, this column varies in length each time, and I only want to copy down to where the entries stop.
I also only want to copy W1:X6, and columns Y, AA, AB, AD (but only down to the end of the column)
I've tried using the End(xlDown)).Copy function, but obviously this doesn't work with the block up the top and the gap between the block and the columns
I am attempting to have cells in Column 'U' deliver different drop-down menus based on the corresponding value in column 'D'. I have created 7 named lists:
List_117G
List_152
List_JMET
List_XBAND
List_PACWIND
List_VORTEX
List_ROVER
Those lists will be called up based on 7 values in column “D”:
“G”
“152”
“J”
“X”
“D/E”
“V”
“R”
So far I have only been able to get this to work for the first category “G”. When I change the value of column “D” from “G” to “152” I no longer get a drop-down. Here is the formula I am using in the List function of validation.
=IF(D6="G",List_117G,IF(D6="152",List_152,IF(D6="J",List_JMET,IF(D6="X",List_XBAND,
IF(D6="D/E",List_PACWIND,IF(D6="V",List_VORTEX,IF(D6="R",List_ROVER,)))))))
There are 11,000 rows and 4,000 are unique. The goal is to merge the data down to the 4,000 records. Each of the unique entries shows up 1 to 15 times.
In trying to solve this, I wonder if I should break this down into the different # of occurances and implement specific solutions. e.g., There are
5700 entries that show up 2x
504 that show up 3x
24 that show up 12x
I want to call a macro with a varying name that is within a module with the same name.
I have a module called Test1 and within this, a macro name called test1
I have a module called Test2 and within this, a macro name called test2
etc
On another module called Test8 (with the macro called Test8), this Test8 macro will call either Test1 or Test2 or Test3 etc depending on what I choose in an excel spreadsheet. So on sheet1, cell A1, there is a drop down with the options Test1 or Test2 or Test3 etc.
The following works to run the macro test1 from module test1 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test1.Test1
End Sub
The following works to run the macro test2 from module test2 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test2.Test2
End Sub
etc
However, if I try it so that the calling of the macro varies as below , it does not work:
Sub Test3()
MacroToCall = Sheets("Sheet1").Range("A1").Value
MacroToCall.MacroToCall
End Sub
I am trying to copy three columns of information from sheet1 into sheet2.
When pasted I need the information to be spaced or offset as per below sample.
Sheet1
HTML ABCDEF
1#AnimalDescription
21Dogfour legged fur ball
32Catother four legged
43Horsegsdfgdfgdbfb
54Snakedfgegergeg
65Ratlkjlmlbnm,
76Birdtshgjmgjkk
Sheet2
HTML ABCDEF
1#AnimalDescription
21
3Dog
4four legged fur ball
52
6Cat
7other four legged ...................
I have dollar amounts that I need to distribute amongst varying numbers of columns and not have have the total distributed be over or under the original amount by any number of cents. When I simply divide the dollar amount by the number of columns, the total of those columns can sometimes be more or less than the original dollar amount by a few cents.
e.g.
Dollar # of A B C All Columns
Amount Columns Total
--------------------------------------------------------------------
$25.05 2 $12.53 $12.53 $25.06
$11.47 3 $ 3.82 $ 3.82 $ 3.82 $11.46
$25.05 divided into 2 columns gives $12.53 in Column A and $12.53 in Column B. Total of Columns A and B is $25.06. Over by a penny.
$11.47 divided into 3 columns gives $3.82 in Columns A through C. Total of Columns A through C is $41.46. Under by a penny.
I know I could simply always add or take away the pennies from one column, but I would prefer the process to be random or formulated in such a way that the Column to which the extra pennies are added to or taken away from differs in order to be "fair to each column".
I am fairly new to excel and I am having trouble trying to get a sub total function to work for me. I need the subtotal to for a list of about 20 columns in one line with a varying amount of rows. So the subtotal must stop when there is a blank at the top. I can get the macro to find the totals A on the spreadsheet and then offset to beneath the columns of numbers but the sub total formulas takes in every number. Here is the example:
456.00
8,798.00
45,465.00
789,789.00
45,465.00
789,789.00
45,646.00
7,897.00
Totals A
[Code] ........
I am putting together a macro to import a CSV file onto excel. I will be manipulating columns of data (concatinating some, dividing by 100 etc.)
What I am having trouble with is that each file imported will have different number of rows.
I tried, in recording a macro, to use autofill (entered formula and double-click fill handle to drop the fourmula into each cell) hoping this would show me how to do it but alas, it just coded the range as the starting and stopping cells (didn't show a count formula or some such.
I've trawled a few forums for a while now trying to find a macro that matches my specifications, or one I can adapt but so far have been unsuccessful, so here goes:
I have one column of data (col. A) of customer names and addresses each with an empty row in between them. The lines of data relating to each customer vary from 6 rows to 14 rows, then an empty row, then the next customer and so on - for several thousand rows.
I am wanting to create a macro that will transpose each customer to either their own row in sheet2, or to column B and then delete column A at the end.
All I can find is macros for a specific number of rows rather than varying. One way would be to have a code that 'pads' out those customers with fewer than 14 lines by inserting rows to make them 14, and then a code to transpose 15 rows at a time.
Is there a easy way to sum a column of numbers in excel and ignore hidden rows?
View 9 Replies View RelatedI've got a spreadsheet with bird species, dates (just day-month) and numbers (how many individuals). It looks a bit like this (well....the real sheet is a lot bigger). Note that some dates appear multiple times, because I counted for many years.
1
A
B
C
D
E
[Code]....
What I want is an overview, to be able to check which birds I've seen on which days of which months (the year doesn't matter) and in which numbers. It's supposed to look like this.
1
A
B
C
D
E
F
[Code]....
It should look for duplicates in row 2, and sum up all the values within these duplicated columns into the first one... It should also remove the columns from which it has summed up the values, except for the first one.
In the attached spreadsheet I would like to calculate the totals for pipe and valves by service & size (Columns A,B D & D) from the groups of paired columns Pipes & Valves under the headings of SD0-1, SD0-2, SD0-3 etc etc to LP-SD8 multiplied by the number of Service droppers (Highlighted in red) with the totals in columns G & H.
I can individually write a formula such as G7 = (I7*I4)+( K7*K4) etc etc, but is there a way to lookup up the data cells?
I have columns that contain text (Populated from drop down lists).
I need to be able to sum the totals of each type from the drop down list. These totals can either be displayed on a second sheet.
I have the following problem -I want the cell with "SUM OF SPE HOURS (C1)" to contain the numerical value equal to the SUM of numbers in column C ONLY IF column A of the corresponding row contains "SPE". Basically a SUM function which only picks up the rows corresponding to SPE.
A
B
C
D
E
SUM OF SPE HOURS i.e. 6
SPE
4
LDE
8
SD
10
SPE
2