I have the following problem -I want the cell with "SUM OF SPE HOURS (C1)" to contain the numerical value equal to the SUM of numbers in column C ONLY IF column A of the corresponding row contains "SPE". Basically a SUM function which only picks up the rows corresponding to SPE.
A
B
C
D
E
SUM OF SPE HOURS i.e. 6
SPE
4
LDE
8
SD
10
SPE
2
I need a formula that will tell me what % of the first 5 units sold are new, based on the dates provided. This is an example of the data I am working with. What i am looking for is a cell that will respond with .4 (meaning 40% of the first 5 units are new) ...
View 9 Replies View RelatedIs there a easy way to sum a column of numbers in excel and ignore hidden rows?
View 9 Replies View RelatedI've got a spreadsheet with bird species, dates (just day-month) and numbers (how many individuals). It looks a bit like this (well....the real sheet is a lot bigger). Note that some dates appear multiple times, because I counted for many years.
1
A
B
C
D
E
[Code]....
What I want is an overview, to be able to check which birds I've seen on which days of which months (the year doesn't matter) and in which numbers. It's supposed to look like this.
1
A
B
C
D
E
F
[Code]....
It should look for duplicates in row 2, and sum up all the values within these duplicated columns into the first one... It should also remove the columns from which it has summed up the values, except for the first one.
In the attached spreadsheet I would like to calculate the totals for pipe and valves by service & size (Columns A,B D & D) from the groups of paired columns Pipes & Valves under the headings of SD0-1, SD0-2, SD0-3 etc etc to LP-SD8 multiplied by the number of Service droppers (Highlighted in red) with the totals in columns G & H.
I can individually write a formula such as G7 = (I7*I4)+( K7*K4) etc etc, but is there a way to lookup up the data cells?
I have columns that contain text (Populated from drop down lists).
I need to be able to sum the totals of each type from the drop down list. These totals can either be displayed on a second sheet.
I'm making a spreadsheet that tracks instances when something goes above or below a threshold. Anytime it goes below, a column populates with the number 1, and if it happens to go below a threshold on a Friday, a separate column populates with the number 2. If its doesnt go below, the column with 1 does not populate, however, every Friday populates with a two.
I need a column that adds the 1 and the 2 when the threshold is broken on a Friday, but only shows the 1 when the threshold is broken on a non friday and shows 0 when the threshold isn't broken, but happens to be a Friday.
I am having an excel problem such that i have several months in a given year and I want to set up a formula where I can enter a specific year and it will return the sum of all the cells that belong to that year (see attached sheet). So basically if I have 2 months in 2006, 2 in 2007 and 2 in 2008 with corresponding values for each of those months, I want to enter a year in another part of the sheet and a value is returned to me to show me the sum of the revenue for all the months that are in that year. So if I enter 2007, it will sum both those values that belong to 2007.
The years and months are dynamic so I can't just sum the columns because in column D it could be 2006 (depending on the other inputs of my spreadsheet) or it could be 2007, so I essentially need some formula that checks the array to see if that cell belongs in a year that matches the criteria and if it does sum it to all the values that match that criteria. I have tried using vlookup, match, index but can't get it to work.
The aim is to find those combinations of variable values which generate highest total gain. I attached the spreadsheet which shows the variables (A through K) and a Gain column. I created 5 additional tabs which show all possible 2,3,4 and 5-member combinations of the variables. These tabs are like coordinates of which variable combinations should be examined. As an example I used the first combination from the second tab = A and B. If you look at these two columns on the EXAMPLE CALCULATION tab you will see 7,7 in the Number combination which is the first number pair for these two variables. The headings of the red and the yellow columns calculate the total count for this number pair and the total gain. These were recorded on a separate EXAMPLE RESULTS tab along with some other pairs which appear afterwards (these were recorded only from the first 39 rows of the AB data). I need a macro which will cycle through each variable pair (only using the combinations from the tab 2 for now, annd later from 3,4 and 5 tabs) collecting statistics for each unique number combination it encounters (printing to a separate sheet one after one), such as shown on the EXAMPLE RESULTS.
View 9 Replies View RelatedIf I have the following: =SUM(E2:F2) - G2). So lets say that E2 has 50, F2 has 60 which = 110. Now I want to take that 110 and subtract it from what is in G2 and put the result in H2.
View 2 Replies View RelatedI need to create a report based on three columns. I have explained in detail about my requirement in the attached sample workbook.
I hope someone will help me to solve the problem through VBA because the items & expenses may vary at times. Hence, I feel a Macro will be the best solution.
I'm looking to do the following below: column A would have numbers, column B would have words and a few columns over i would have the total of each same word
column A column B
60house
120car
30misc
52.25food
83.33gashouse 180.25
120.25housecar 120
25miscmisc 55
105foodfood 157.25
50.5gasgas 133.83
I have a worksheet (downloaded from Paypal) and the columns I need to sum are of varying length (sometimes 12 rows and maybe 200). I am having trouble finding a way to find the end plus one of the column to write the formula in.
My data in excel looks like this:
A B C D
Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party
3/22/2012 0:00Thursday 12:00 P.M. 2
3/22/2012 0:00Thursday 12:00 P.M. 4
3/22/2012 0:00Thursday 12:00 P.M. 1
3/22/2012 0:00Thursday Not Requested 2
3/22/2012 0:00Thursday 12:00 P.M. 3
3/22/2012 0:00Thursday 12:00 P.M. 3
3/22/2012 0:00Thursday 12:00 P.M. 4
3/22/2012 0:00Thursday Not Requested 1
3/22/2012 0:00Thursday 12:00 P.M. 2
3/23/2012 0:00Friday Not Requested 2
3/23/2012 0:00Friday Not Requested 5
What I'd like to be able to do is if Column A,B, and C are the same to sum column D. So, for example, I would like the data above to look like this:
A B C D
Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party
3/22/2012 0:00Thursday 12:00 P.M. 7
3/22/2012 0:00Thursday Not Requested 3
3/22/2012 0:00Thursday 12:00 P.M. 12
3/23/2012 0:00Friday Not Requested 7
I have been trying multiple SUMIFS and SUMPRODUCT formulas to try and revamp my budget spreadsheet. My first criteria is the month being a certain number (contained in a column), if that condition is met it needs to look for the account number I am budgeting for (row heading) and if it matches both criteria I need it to sum the Column that has the row heading of the account number. I have succeeded in doing a SUMIFS and manually finding the column that has the heading of the account number I am looking for, but I would like this to be an automated process so I can copy the formula. Below is the data I'm using (a very, very small portion of it), and the results are how my budget sheet is going to look. These will be on separate tabs in the workbook.
EX: For July electric revenue (44211) I need my formula to: (if the Month column=7 & if the Account Code row heading=44211, sum the column that has the heading of 44211). So far I cannot get this to work.
DATA
Account Code
44211
44215
[Code]....
I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.
Currently I have this thing solved with following formula:
N48=sumproduct(sumif(indirect("'"&$B$378:$B$385&"'!A:A");A48;indirect("'"&$B$378:$B$385&"'!L:L")))
Where B378:B385 includes sheet names.
But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.
So, in addition of getting values for specific product number I need to get values from specific column based on column header.
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I have a little problem I would like some assistance on. I pull data from a data warehouse into an Excel spreadsheet that is linked to another spreadsheet that consolidates the data. I need to add the PGL Grads only for completed classes which are usually show zero (Actual Grads column) unless there were no entries (Actual Entries). Currently, the formula used is =SUMIF($I$104:$I$118,">0",$H$104:$H$118) but this can cause problems if there is a zero value for a completed class. In the example below, the total for PGL grads is 142 but in reality it should be 158, the zero value for class 2008008 skewing the result. I have tried variations of SUMIF, SUMPRODUCT, and SUM and end up with the same results. The warehouse data puts zero values in the Actual Grads column for classes that have not completed and I know I can make this work with blank values but that just creates another step in the process ...
View 9 Replies View RelatedI am trying to get the conditional average of 2 data columns.
data_1 category data_2 category
2.5 Yes 1.2 No
4.2 No 2.6 No
3.5 Yes 3.9 Yes
4.1 No 2.5 Yes
What I need is the average across the 2 data columns (data_1 and data_2) for category Yes and category No. I know I can use averageif to get the conditional average of 1 column, but that doesn't work with 2.
I wish to have one conditional format apply to K and L. Presently it's L only where it works.
=OR(K1="",AND(K1="No",L1<>""),AND(K1="OJ",L1=""))
Why when I change the range from =$L:$L to =$K:$L does it not apply to both?
I have a conditional formatting issue, using VBA.
My conditional formatting code works fine for one column; however, when I try to apply the conditional formatting to two columns, the code only applies to the first column listed. Additionally, I have two sets of "rules" that apply to the same column. One of the "rules" includes two columns. The other rule applies to only one column. I'm not sure if this is my issue, or whether I'm trying to apply the same code to two different columns.
My code is below.
Code that applies to column "M" only...
I have ammended the colours to 4 colours that I need for a risk assessment tool . I have added a second worksheet and put a dummy sample of my table there. Can you help me with how to put two colums of conditional formatting in the sheet? The risk rating before and that after the risk treatment? Many thanks in anticipation. I have highlighted in yellow the columns where the product of the consequence and likelihood is likely to be and this is where the colour coding needs to be applied. if you can help with putting the solution in the spread sheet that would be a great help. Any reply via this forum or via my email would be greatly appreciated.
I am new and I hope I have not made a mistake in starting a new thread. Sorry if I have but I wanted to bring this up as a new post so I get a sooner response.
I essentially want a worksheet level function equivalent to the following VBA function. When I try to use this function and copy it down 155,000 rows it takes far too long.
The function should check a second worksheet for both Prod Code and Client Number and where it finds both it should return the price of that product code specific to the client.
Function ClientPrice(x, y)
'x = Prod Code
'y = Client Number
[Code]....
I have three columns in my worksheet.
Column 1 reports the name of three people, John , George and Jim, column 2 the year for which they are paid (e.g. 2002, 2003 etc) and column 3 the amount of money they received each year (e.g. John received 18$ in 2005, $15 in 2004 and 11$ in 2003). I need a function to give me the average salary earned by each of these people in the period 2003-2004 e.g. John earned $15 in 2004 and $11 in 2003, so the average value is 13. Is there a function to do it automatically (so taking the conditional average---average for john given that year is 2004 or 2005)?
I want this average to be in column 5 (column 4 will contain the names john, george and jim)
Is it possible to use conditional formatting to set all the unused columns (S - ZZ) interior color to gray?
View 5 Replies View RelatedI have what I think is a pretty complicated issue. At my job, we have a running and constantly changing list of jobs that we have to work on throughout the day. The job management system is really unwieldy and it’s often hard to tell what exactly we have to do today and what can wait until tomorrow. So a few times a day, I export the list to an excel doc, which I’m trying to set up with conditional formatting to highlight as green the stuff for today, ghost back what can wait, and leave white and blank the cells that don’t have any info in them. I but the attachment system wasn't working for me, so I can't provide the example I've been working on.
So far, I’ve managed to set up a formula in the conditional formatting that takes into account column C, but I need to take into account information in columns B, C, and D to determine if the job line should be highlighted or dimmed. Column B is the job's title and it is just text, column C is the Begin date, and column D is the due date. here’s what I need the conditional formatting to do.
If the begin date in column C is Today at 9:00am or earlier, and the due date in column D is today, I need to highlight the column. I managed to figure out the first part of this formula, but don’t know how to keep the line from hilighting if the due date is tomorrow: =$C2<=TODAY()+TIME(9,0,0)
The second part is that I need to hilight jobs that begin and are due today (have today’s date in columns C and D), regardless of what time they have if the task title in column B starts with “Rework Request from PS” or “Rework Request from QA"
Ideally, I’d like to change the text color to something nearly white to sort of hide the jobs that don’t need to be done today, and I figured that part out based on the formula I did manage: =$C2>=TODAY()+TIME(9,0,1)
apply this to the whole sheet so I can paste the report into it a few times a day without having to rewrite the formulas in a new sheet every time, and the number of items does change throughout the day. However when I do, the empty cells turn green as if they’re due today, and I can’t figure out how make them stay blank.
Im having a little trouble with this, Im dealing with a list, and I need to change the colour of rows, based upon a value in 2 different columns.
Im close, but cant quite get it.
Basically its like this, the data in these cells will only ever be either; blank in one or the other, both are never blank. or a number up to about 3 or 4, usually 1 or 2.
I'd like to compare two columns of data and highlight where a value doesn't occurr in both columns. The problem I have is that one of the columns uses * around the text to ensure it catches all variations of the value.
I have the following formula which would work if the data was exactly the same.
=COUNTIF(lst2,value)=0
However, these *'s are meaning it never works.
Is there a way to make it so that if the values with the *'s are not found in the 1st column of data, conditional formatting is activated?
I have data in cells A2 - N2 and cell O2 is currently blank. I am trying to set conditional formatting where if O2 has a value entered into it, it will conditional format A2 - N2 and highlight the entire row red.
I tried a formula like =O2"" but that does not work. Also tried a few other things but no luck.
Also, once the formula is set, what is the best way to apply the conditional formatting to rows 3 - 30. I tried the format painter tool but that seems to want to extend the formatting range from rows 3-30 and not just per row.
I was wondering if was possible to create a conditional calculation excluding hidden columns.
For example in C4:HA4 the cells may have a number of values L, S, U etc.
When a user access the spreadsheet certain columns a hidden based on comparing their PC user ID to an access list in the workbook.
What I would like to be able to do would be to count the instances of L in C4:HA4 but exluding the hidden columns.
I'd hoped I might be able to use SUBTOTAL in a similar way to Domenic came up with here:
=SUMPRODUCT(SUBTOTAL(9,OFFSET(C2:C100,ROW(C2:C100)-ROW(C2),0,1)),--(C2:C100
