While working within the same worksheet, why not put all the routines in one Module instead of using different modules?
BTW, what made me raise the above question is that I have 2 modules in my test worksheet. But when I go to Tools | Macro | Macros > This Workbook, it does NOT show the sub-routines of the first module
After all the awesome macros I've obtained with the help of all of you, I now have over 30 macros, each in its own module. I have tried without success to re-name the modules with no luck. How is everyone organizing these?
View 2 Replies View RelatedI am just wondering if there is a way to allow a macro to continue running in the background once a userform has been displayed? I have disapled the 'close' button and the last action of the macro is to re-enable it.
Macro to export and import a module and assigning different macro automatically ...
View 9 Replies View RelatedI am trying to find a way to write a Macro that will auto color multiple cells based on what data is displayed in one cell. The cell I want to reference is a vlookup cell.
Basically this is a part label. And depending what part is selected from the list my vlookup will display its position on a vehicle(i.e.. FR, FL, RR, RL, Etc..). So if vlookup comes back with FR I want the various cells on the label to be orange, etc..
ALSO: if there is a way to embed it so it does this automatically (rather than run the macro each time).
Let's say i have 2 Modules on my VBA forms, is it possible to Copy all the Codes in Module 1 and Paste it to Module 2 by using a Command Button?
View 1 Replies View Related i got a question how i can make a msgbox in one module with 'Yes' linking to a different module.
such as: this is located in module2
Code:
If MsgBox("Do you want to activate module1?" & vbCr & _
"" _
, vbYesNo, "Choose") = vbNo Then Exit Sub
i want that vbYesNo different
No as in Exit Sub
yes as in activate Module1
I need a module that will add 1 to the value of a cell (A1) every ten seconds.
for example:
A1=-200
A1=-199 (after 10 seconds)
A1=-198 (after 20 seconds)
A1=-197 (after 30 seconds)
I found a macro on this forum that I think will work for the first part of such a module (If I modified it correctly). It should give me the ten second timer part of my problem. What I need is the second part of this module to add one to the value of A1. I'm sure it's something simple, but I don't know where to start.
I have a macro call psc in one module
in a different module I would like to "call psc"
however, this does not work
I just created a macro in Personal.xls and Excel (for no apparent logical reason) created this macro not in Module 1 (which has no macro or anything else in it, it is blank) but in Module 11.
How does Excel decide what module to put a macro in? Why not choose Module 1?
What's the difference between Module 1 or if I cut the macro from Module 1 and pasted it into Sheet 1 of Personal.xls which is blank?
I have macro in ThisWorkBook that runs when I open the workbook
Private Sub Workbook_Open()
I would like to to delete this macro using a script that I have in a Module. There is another macro in ThisWorkBook which I want to keep.
What i have at the moment is a module that contains code where i call a different module that i use as a procedure.
Module1
Code:
If Sheet1.Range("C4").Value < Sheet1.Range("A2").Value Then
If Sheet1.Range("K4") = "" Then
MsgBox "Please check 06:00 tasks not done yet!"
Cell = "Range(" & Chr(34) & "F4" & Chr(34) & ")"
If Sheet1.Range("C4") + 0.042 < Sheet1.Range("A2") Then
Run "EmailProSheet"
End If
End If
End If
EmailProSheet is what i call but now i want to use the variable "Cell" in the procedure as well?
Module3
Code:
MsgBox Cell
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
On Error Resume Next
[Code]........
As it is now everything is working fine but does not return a value in "Cell" if the procedure is called. Is there another way?
I have a workbook that has 2 similar worksheets. One called "Wood Shafts" and the other called "Iron Shafts" I have the macros worked out for the sheet called "Wood Shafts" and I just realised I need to apply similar Macros to the sheet called "Iron Shafts" (same functions but different values from different columns). Some how I need the code to be able to tell the difference between the two sheets. I am at a loss.
View 4 Replies View RelatedWhen in a ThisWorkbook macro, I want to call a sub/macro in a Module. Usually you can just do a CALL MACRO1, and it will find it. But my MACRO1 is Private as I don't the users to be able to do a Tools, Macro, Macros and see it. So I don't want to make it a Public macro. So how do I call the private sub/macro from within ThisWorkbook?
Can I proceed the sub/macro's name with the name of the module, kind of like CALL MODULE1.MACRO1? Or do I have to make it public?
The attached file contains a simplified version of a more complex macro in which a sub routine will be called a number of times to change the colours of cells in different ranges. However, an error is triggered because the a variable and range are not defined in the subroutine although they are in the main part of the macro.
I know I am missing something obvious here, but I'd appreciate any help in knowing how I can define the ranges in the main procedure and then call the subroutine to change values in the different ranges.
I have a sheet that has a macro on it, I would like to run that macro programaticaly but Im not able to call it using Call mymacro type of code. The code that calls the macro resides in a module and the macro is in a sheet. Obviously they are not talking, is there a way to run it remotely without moving the macro into the module?
Can Active-X control button macro be placed in a regular module, or does it always have to reside in the sheet module?
Or is the only way to accomplish this is to have the macro in the regular module being called from the button macro in the sheet module?
I somehow seem to remember a way to move/assign an Active-X ControlButton macro to a regular module, but maybe I'm wrong?
I recieve an error :
Run-time error '50289':
Can't perform operation since the project is protected.
When i try and run my code.
The code does add parts to modules and workbook events, but I need the code to be protected.
i am running a macro thru vba (beiing called from a ms access module) and am getting a RuntTimeError 1004.
the code opens a workbook...then open a second workbook (which houses the macro) then activates the desired worksheet and call the Maco via the run command but errors out.
if i open the workbook and set focus on the desired sheet ....tool>macro>desired macro name it runs fine.
the line of code in the macro is: "ActiveCell.Offset(1, 0).Activate"
I'm having trouble calling a defined range within a VLOOKUP function in VBA. If the named range is located on the same sheet within which you are running the macro, everything runs fine and all is well in the world.
However, after I relocated the range to a separate sheet (a 'SourceData' sheet to tidy up the user interface sheet), I was getting the following error message:
Method 'Range' of object '_Worksheet' failed
The name is correctly defined - Range("DaysInYear").Select still picks up the correct selection - it's just the VLOOKUP will no longer function correctly.
Here is part of the macro's
For I = 1 To NumberOfDays
Range("A1").Value = DateAdd("d", -(I - 1), EndDate)
If Application.VLookup(Range("A1"), Range("DaysInYear"), 3, False) = 1 Then
If Application.VLookup(Range("A1"), Range("DaysInYear"), 4, False) = 0 Then
ActualNumber = ActualNumber + 1
End If
End If
Next I
I have a macro that copies data from several workbooks saved in a particular folder to a master workbook.
The problem is that this macro only works when it is included as a module in the master workbook. Unfortunately, I cannot ask the users of this macro to insert a module, copy the code and run it each time they want to consolidate the master workbook. Therefore, I wanted to use this code by including it in a Add-In that I already prepared. The problem is that this consolidation macro does not run when it is in an add-in. Create a code that I can include in a macro add in that would insert a module in the master file, include the code that I already have, run it and then delete the module? The add-in would be password protected.
After searching this board, I am using a check for this issue to alert when the problem occurs, but I'm hoping to tell Excel to fix the problem itself. The issue occurs when a set of data equals 100%, but when fewer decimals are displayed, the displayed total equals 101% or 99%.
Example:
0.6%
1.6%
97.8%
(Now when the display is changed to no decimal points)
1%
2%
98%
As you can see, the data appears to total 101%, and my boss is being a (insert any comment you probably have about your boss) about me not manually reviewing every single report that goes out for this 1% difference. As there are probably 400 different points at which this situation can occur on a daily basis, working harder is not the solution. /rant
I thought I once heard about a formula or setting where Excel will only calculate the displayed values instead of the actual value or formula. Ideally, the formula would know to take the three values, figure out the 100% limitation, and round the largest one down so the other two can round up. The example above is probably 99% applicable, as we would be rounding the largest value down in order to round the other values up.
Meaning intended result:
1%
2%
97%
I've data from A1 till G1. Now I will hide column B & D I just want to have total of displayed columns that must ignore values written in column B & D
View 1 Replies View RelatedI have a worksheet I use at work that calculates volume proccesed hourly, and also shows a running total as you enter hourly figures into the table, my question is can you hide everything in the result cell until the figures for each hour are entered ? currently all the result cells have irrelevant numbers in them until you enter the hours figure and the formulas do there thing, I could relly do with them being blank until the relevant hours information is input?
View 2 Replies View RelatedI want no time functionality nor any calculation of the entries. I simply want to type into a cell for example: 0908 and have it displayed as 09:08. I tried custom formatting the cell to hh:mm but then it displays as 00:00.
This is for a real-time incident logging sheet and the less the operator has to type, the better. I know it is only an extra Shift+: but it will be so much easier without having to do it.
I like the way the names auto fill. Though would ilke to have it so say when roc is entered it shows as a dropdown so you can see that there are more than one ROCHESTER.
Like a search i guess, That would be valid to the first to letters. so if you had name donald, david & daffy when D is entered it showes all three then when DA is showes only David & daffy.
The project that i will 1st use this on is a contact address ph book.
I want to sum cell A1 and result will be displayed in B1
AB1ValueResult29292.50*10+8952*15+8550*10
Using the below code, I want data in range with format (for ex: J2:K7) to be displayed in the email sent in the place of Email_Body1 place.
Private Sub CommandButton1_Click()
Range("H2").Value = Date
Dim myOutlook As Object
Dim myMailItem As Object
Dim FName As String
Dim i As Long
[Code]....
I'm creating a customized, interactive calendar with several drop-down menus included for each day of the week. I want to have a self-adjusting section at the bottom of each month that shows which values have not been selected in the drop-down menus on any day.
I have a column next to the source list for the drop-down menus with =IF(ISNA(MATCH formulas to show if a value has been selected anywhere on the calendar. If no one has selected a certain value from any of the drop-down menus then "XXXXX" shows up in the row next to its source (one "X" for each column, Mon-Fri). If a value has been selected, then it says "FALSE".
I now want to have a section that lists only the values that have not been used, with "XXXXX" next to the source data. However, any formula I use is not able to differentiate between "FALSE" and "XXXXX" because they are both "0" values in a numerical sense. Can I create a formula that references the displayed value, rather than its true numberic value? What formula would be best to use to list only data not being selected from the drop-down menus? Is there a simpler way of displaying this information than what I'm trying to do?
I have a column with dates in the following format: dd/mm/yyyy h:mm
but im doing an XML export and excel only exports in text format. I would like to somehow resterize or only use the displayed amount instead of the text which is exported (ie- 37805.1640277778)