Macro Copy Of The Active Sheet And Then Rename The New Copied Sheet
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Rename Embedded Active Chart Sheet Name
For example, a cell on the screen is blank. When the page is printed, the "blank cell" has printed text. I checked "format cells" and it shows word wrap, merge cells, and left to right. I was told to "un-merge" the cells. I did that and I still have the problem. The color on all the cells is OK at a blue shade. When I look at print preview the cells are blank, but when the sheet is printed, the text shows. Also, it looks like there are 2-3 cells inside the main cell. I hope I have explained this properly, it is not easy to use the correct language to describe since I am not very good at using Excel.
View Replies!
View Related
Copy/Paste From Active Sheet To Another Sheet
I want to copy data from the current sheet, and past it in the "montly" sheet. 'i and j were defined above, with a Case statement Range(" Ai:Cj").Select Selection.Copy Sheets("monthly").Select ' I want the upper left cell of the pasted area to be A11 Range("A11").Select ActiveSheet.Paste I get an error saying that I should select one cell and then paste. But I thought that that is what I did...
View Replies!
View Related
Copy Sheet Rename With A List
Sheet1 has the list of names (cells A2:A315). Sheet2 is hidden and has related formulas. Sheet7 is the sheet i want to copy What i want to do: 1) I want to copy sheet7 for each name on the list 2) Rename each sheet with the next name on the list 3) In each of the copied sheets in cell B1=newsheetname
View Replies!
View Related
Copy Sheet And Rename Based On Date
I have a spreadsheet that I enter daily totals into. The sheet is named by date. I take totals from a number of catagories from the prior day's sheet (ending totals) and enter them on the current sheet (beginning totals), then enter the current day's totals to wind up with new ending totals. I want to generate a new sheet in the same workbook based on the date of the prior sheet, copy my formatting, and copy the data from the old ending sheet totals to the new sheet beginning totals.
View Replies!
View Related
Copy To Another Sheet, Rename And Paste Special Values
i would like to copy a sheet to another sheet, rename, copy and paste special values. but after the sheet is copied to another, the macro stops working...? Sheets("Proposal").Copy After:=Sheets("Proposal") 'rename... ActiveSheet. Name = "ProposalEmail" ActiveSheet.Copy ActiveSheet.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks _ :=False, Transpose:=False
View Replies!
View Related
Change Sheet Macro Name In A New Copied Workbook.
I have a workbook, 'MyWb.xls' and a sheet with buttons to which I attach some sheet macros. When I assign a macro to a button I pick the appropriate reference, e.g. Sheet2.MyMacro, and this gets recorded by default as MyWb.xls!Sheet2.MyMacro When I create a new single sheet workbook with the instruction ActiveSheet.Copy, I end up with a new workbook, say 'Book2' along with the buttons as expected. However the macros attached to the buttons still refer to the MyWB.xls file and not the new 'Book2.xls'. As part of the process of creating the new book I've tried redefining the macro with the instruction
View Replies!
View Related
Macro - Using Sheet Template Need It To Auto-Rename
*Inserts an existing worksheet template and places it at the end (or after all) the existing worksheets. What I would like the macro to also do is: *Automatically rename the inserted worksheet (via my worksheet template) in sequence to the existing worksheets Example: So let's say I have 3 existing worksheets titled Sheet1, Sheet2, Sheet3 (that's basically the default naming Excel uses). But would when I insert a new worksheet (via my worksheet template) it is shown as Sheet. And if I insert another one, it would be Sheet (2). So basically it is showing as such: Sheet1, Sheet2, Sheet3, Sheet, Sheet (2) What I would like the macro to do is automatically rename those last 2 worksheets (and any subsequent worksheets thereafter) in sequential order. Basically displaying it as such: Sheet1, Sheet2, Sheet3, Sheet4, Sheet5...(and so on and so forth)
View Replies!
View Related
Runtime Error 1004 :: Cannot Rename A Sheet To The Same Name As Another Sheet
Why do I get the error: "Runtime error 1004: Cannot rename a sheet to the same name as another sheet, a reference object library, or a workbook referenced by Visual Basic"? And how do I fix it? I have a macros that someone else made (thank you) and I need to make the macros create anywhere from 5-125 sheets based on the information added in sheet 1. How can I do this whe it stops me after 5 or so with the error above.
View Replies!
View Related
Copy Range Of Cells To Active Row In Second Sheet
Sheet 1 has data entered into it, it is then printed out as a jobsheet, saved and the data cleared. There are certain fields on this sheet that are eventually manually replicated onto sheet 2. The row in which they must go on sheet 2 will always be the 'activerow' on that sheet from a previous operation. It would make life so much easier and save lots of time if I could incorporate copying cells C10,C12,K8,K12,M2,C27 and C29 from sheet 1 to respective cells H,I,J,M,N,R,S of the active row on sheet 2 before I carry out the clear data process.
View Replies!
View Related
How To Run Macro From Active Sheet
I have written the below macro to copy data from a sheet called "Fixit Example 1" to a sheet called "Fixit Summary Example". It works fine, but I'd like to be able to run it from any "Fixit Example XX" worksheet. As written, the data is always copied from "Fixit Example 1" regardless of what worksheet I have open. I tried replacing Windows("Fixit Example 1.xls").Activate with Windows(Active.Worksheet).Activate but got an error "Run time error 424. Object required." Sub MoveData() ' ' MoveData Macro ' Macro recorded 18/03/2009
View Replies!
View Related
Create Copy Of Active Sheet & Convert Original To Values Only
I need to copy the Selected Sheet (Sheet name will be different each month) on a spreadsheet and paste the copy to the left of the selected Sheet. Then I need to copy and paste values the entire sheet of the sheet that the copy was made from (the one on the right). I am very new to macros, and I tried recording and manually editing the macro with no success. The number of sheets will be different always as I will be adding this to different workbooks and also because new sheets may be added to any workbook at any time. I attached my code that I came up with, as I am not familiar with code enought to "[code]" my code.
View Replies!
View Related
Macro To Copy A Number From One Sheet To Other Sheet
I have a report generated from an application and am looking to format it into a specific format in order to import it into access to be used in a query. Does anyone know how to write a macro which will:- 1. look for a particular word and delete 1 row above it and 16 rows below it, for every time that word appears on the sheet. 2. Look for a specific number (which can be identified by the total number of digits in it and/or the starting series of numbers) from it’s location to another newly inserted column 4.Finally, count the number of rows between the number moved in step 2 and the next similar number and copy the first number in to number of rows = the number of rows between it and the next similar number.
View Replies!
View Related
Macro To Update Links In Active Sheet Only
I have a workbook which has links to another excel workbook (source). This workbook has many sheets -all exact copy- with different names. I changed startup prompt (edit->links) to "dont display the alert and dont update automatic links". Then I recorded a macro for updating links (from source) and assigned this macro to a button. What I want to do is when I click this update button I want links to be updated only on the active sheet that Im on. My problem is, when I press this button, it updates all links including other sheets (basically whole workbook). My current macro is (I dont know coding but I tried changing ActiveWorkbook to ActiveSheet but it didnt work): Sub update() ActiveWorkbook.UpdateLink Name:= _ "C:Documents and SettingsAlperDesktopExcelsource.xls", Type _ :=xlExcelLinks End Sub
View Replies!
View Related
Keep Hidden Sheet Made Visible As Active Sheet
I have a button on a sheet that runs a macro to unhide another sheet. That works, but I want the sheet made visible to remain forward. Instead, the button unhides the sheet and the sheet the button is on comes forward again. I am unable to figure how to keep the sheet made visible forward. Here is the macro 'as recorded'. Sub UnhideSheet1() Sheet2.Visible = True End Sub
View Replies!
View Related
Advanced Filter Active Sheet Macro Code
the macro mentioned below has been assigned to a combo-box form. I have 2 different datasets in the same sheet, they have the same headers (but named differently, myhead and myhead1) and the same adv filter criteria range (named as "dcrit") is applicable to both datasets. So, if an item is selected from the combo-box, both the datasets should get filtered according to same criteria. how i can combine the 2 IF LOOPS mentioned in the code? Sub myfilt() Application. ScreenUpdating = False If ActiveSheet.FilterMode Then ActiveSheet.ShowAllData If Not (Range("indsignal")) Or Not (Range("countsignal")) Then Range(Range("myhead"), Range("myhead").Offset(1, 0).End(xlDown)).AdvancedFilter _ Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False End If If Not (Range("indsignal")) Or Not (Range("countsignal")) Then Range(Range("myhead1"), Range("myhead1").Offset(1, 0).End(xlDown)).AdvancedFilter _ Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False End If Application.CutCopyMode = False Application.ScreenUpdating = True End Sub
View Replies!
View Related
Copy Sheet & Create New Monthly Sheet From Present Sheet
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February? Also rename the new sheet (February) cell B3 the same as new sheet's name (February) So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
View Replies!
View Related
Create Macro To Chart Data With Location As Object In Active Sheet
I have been trying to create a macro in excel to chart a selection of data and to output the chart on the active sheet where the data was taken (as opposed to a named sheet). So basically, I have about 300 worksheets with data, and I would like to have a button on each page that automatically charts that data when clicked, and outputs the chart to the page where the macro was clicked. However, I have not been able to figure out a relative reference that will allow me to make the LocationasObject reference simply the ActiveSheet as opposed to a specifically named sheet. See my code below, which references an output to a worksheet called "Charts". Right now, all of my charts are outputting to the sheet called "Charts", as opposed to the active sheet. Sub ConsDiscChart() ActiveCell.Offset(29, 11).Range("A1").Select Selection.End(xlToLeft).Select Selection.End(xlToLeft).Select Selection.End(xlToLeft).Select Selection.End(xlToLeft).Select Selection.End(xlToLeft).Select Selection.End(xlToLeft).Select Selection.End(xlUp).Select Selection.End(xlUp).Select Selection.End(xlUp).Select Selection.End(xlUp).Select Selection.End(xlUp).Select Selection.End(xlUp).Select Selection.End(xlDown).Select ActiveCell.Offset(0, 1).Range("A1:B1").Select Range(Selection, Selection.End(xlDown)).Select ActiveCell.Offset(0, -1).Range("A1:C24").Select Charts.Add ActiveChart.ChartType = xlLineMarkers ActiveChart.Location Where:=xlLocationAsObject, Name:="Charts" With ActiveChart .HasTitle = False .Axes(xlCategory, xlPrimary).HasTitle = False .Axes(xlValue, xlPrimary).HasTitle = False End With End Sub
View Replies!
View Related
Macro - Rename Only & Sheet... & Tabs With Last 8 Characters From Cell
I pull an excel sheet from a database each day that gives me sales data for different products sold. The way the spreadsheet comes from the system, the first tab is named "Document Map" and lists all of the products, and each product then has its own tab but they're generically named (Sheet1, Sheet2, etc.). The name of the product is always in cell T8, but the name itself is only the last 8 characters of that cell. What I'm hoping to accomplish with a macro is two things: 1) Retrieve the last 8 characters from T8 in each tab, and name the tab with those characters (same effect as the formula "=right(T8,8)"). 2) Ensure that this only occurs on tabs with the word "Sheet" in the beginning. Depending on the day, there could be any number of products and they each get their own tab, so I was hoping to be able to get the macro to only work on sheets where the first 5 characters are "Sheet" regardless of the number after that.
View Replies!
View Related
Data From The Data Sheet Is Copied Over To The Report Sheet With Formula
The data from the Data sheet is copied over to the Report sheet with formula. Basically, what I need to do is If statement: -when there is no any data in csv file (so the Data sheet will be empty); -the range (A7:N1000) to be hidden (on the Report Sheet) -the Report sheet to be saved and also... I would like to ask, how to select from the Data sheet, the rows with Data only. I copy them over with formula instead of macro- but would like to hide all the empty rows on the report. Option Explicit Sub Update_Report() ' ' Macro1 Dim extract1 As String Dim dReport As String Dim rSheet As String Dim dSheet As String extract1 = "LeadSheetAll_0001.csv" dReport = "Appointments.xls" rSheet = "Report" dSheet = "Data1" Application.ScreenUpdating = False Application.DisplayAlerts = False
View Replies!
View Related
Copy Data From One Sheet (Fixed Cells And Sheet) To Another Sheet
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet. also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
View Replies!
View Related
Buttons Not Wanted On Copied Sheet
I am copying sheet 1 to the back of the workbook and renaming it. I am using a few command buttons on sheet 1 to trigger the copy macro, etc. I do not want these buttons on the copied sheets. I have done a right click /Format Control/Properties and selected “Don’t move or size with cells” but the buttons are still being copied and still active for the macro. Perhaps due to sheet copy versus cell copy? I guess I could add select and delete steps to the macro for the buttons but this seems excessive.
View Replies!
View Related
Change Sheet Name In Formula When Copied Down
Suppose I have 100 worksheets in a workbook ( named 1,2 3 ........100) in a collecteve sheet ( I have a coulmn of 100 same formulas refering to the same cell in all the 100 worksheets) for example : '1'!$a$1 '2'!$a$1 if I drag the first formula Fill Down With Fill Handle then, the sheet name will be the same all the way down(1) , which is not correct , so I have to go bach and modify them manually , which is very boring and mistakes could easily happen
View Replies!
View Related
Remove Reference From Copied Sheet
How do I copy a sheet into a new workbook without the formulas referring to the old workbook? For example, formulas end up like this: = SUMIF('[BAS05-07to09.xls]IN'!$B$6:$B$62,101,'[BAS05-07to09.xls]IN'!$E$6:$E$62). I want them to come across as I originally had them, like this: =SUMIF(IN!$B$6:$B$62,101,IN!$E$6:$E$62). here are too many to do it manually each time.
View Replies!
View Related
Rename Sheets - But Not Every Sheet
I have 20 sheets in the workbook. 10 sheets are named YR1, YR2, etc. Once the user enters information on sheet "Assumptions" - names are setup and linked onto each YR page. So user enters CY10, which links to cell C5 on YR1 to show CY10. I would like a macro that renames just the YR1, YR2, ....sheets, to CY10, CY11, .... I do not want any of the other sheets to change names. (FYi - Using Excel 2003)
View Replies!
View Related
Auto Invoice Number Copied Sheet
auto incrementing my invoices. The way I do my invoicing is like this. I have 1 Invoice in a worksheet (eg April 1) When I make my invoice for the next day I right click on the April 1 tab at the bottom. Right click/Move copy/move to end &check the create a copy box. It changes to april1(2)I then right click and change the date to the next invoice date. This might seem goofy, but it works for me. I have my Invoice number at the top of the page in cell e2. Is there a formula to automatically increase the invoice number by 1 every time I copy it?
View Replies!
View Related
Look At The Item ID Column On Sheet1 Compare It To SS# On Sheet Two And Copy Any Rows From Sheet1 To The End Of The Sheet In Sheet 2
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View Replies!
View Related
Automatically Rename Sheet Tabs
I have a workbook with multiple tabs. On sheet one a person chooses a date to initialise a formula. That date is then copied to sheet two and placed in cell D5. The date is projected out for two weeks and then the next fornight starts on sheet three and so on. The start date for each new fortnight appears in cell D5 of each sheet. I want that information to be the name of the tab for sheet two, three etc. I have put this code into the "This Workbook" section: Private Sub Worksheet_Change(ByVal Target As Range) ' Renames all worksheet tabs with each worksheet's cell A1 contents. 'If cell A1 has no content, then that tab is not renamed. For i = 1 To Sheets.Count If Worksheets(i).Range("$D$4").Value "" Then Sheets(i).Name = Worksheets(i).Range("$D$4").Value End If Next End Sub I have also tried: Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$D$4" Then ActiveSheet.Name = Left(Target.Value, 10) End Sub I then go back into sheet one and change the date and nothing happens. I seem to be missing something. Can anyone please help?
View Replies!
View Related
Rename Sheet With ActiveSheet.Name Formula
I am trying to use ActiveSheet.Name formula to rename the active sheet. It is only working part of the time and I can't figure out why. I do know, however, when it is going to work and when it is not going to work. If cell A2 contains two words, it does not work. If cell A2 contains only one word, it does work. Here is the code. The highlighted part in blue is the code that names the sheet. I have attached sample spreadsheet if needed.
View Replies!
View Related
Using A Combobox To Select Sheet Where Data Is To Be Copied From A Userform
The macro below in its current state adds data entered from the userform to a specific sheet. I would like to change it so that a player can be selected from combobox named txtmplayer and the data entered be copied to that specific players sheet. If this information is vital: There are 8 players. Player sheets can be named player1, player2, and so on. I would like to keep same method for entry (finds first available row)
View Replies!
View Related
Rename A Sheet Based On Cell Data
I'm looking for a solution that will rename the sheet to whatever is enterd into particular cell. Ie: cell A1 = "Joe Bloggs", then the sheet is renamed to Joe Bloggs Also, on the same sheet, is it possible to change the sheet tab colour based a data in a different cell? Ie: cell B1 = "Parts", then the sheet tab colour changes to pink.
View Replies!
View Related
Rename Sheet Using Multiple Cell Values
The macro below renames the current sheet to the cell value of D4: Sub Rename_Sheet() With ActiveSheet .Name = Range("D4") End With End Sub What can i do to the code above so that it will rename the sheet based on 3 cell values instead on only 1 value? I want the end result to look like this with x's between the values: D4xD5xD6
View Replies!
View Related
Click Button To Rename Sheet Tabs Based On Range
I searched a few times for the answer to my problem, using different search terms, but I've come up somewhat empty (this *might* be because I'm not up-to- speed with Excel's terminology?). Anyway, my problem is this: I have a workbook which is designed to track various data for a corporate training course ( sheets for attendance, grades, tool logins, etc). After all of these are sheets numbered 1-25 (we never have more than 25 students in a class, but usually around 20). The numbered sheets correspond to the student's number in the on the class list sheet (so, the first student would have personal "report card" information on sheet 1; the eleventh student in the class list would have their information on sheet 11, etc). What I would like to do is have some way of putting a button on the class list sheet which would look at student list and rename the sheets to correspond to the student names. For example, if the fifth student listed was 'John Doe', it would rename his personal sheet ('5') to 'John Doe'. Obviously, I would need to do it for all of the students, and IDEALLY it would then get rid of any numbered sheets which are not used (having 21 students would only rename the first 21 sheets, but then hide sheets 22, 23, 24, and 25).
View Replies!
View Related
|
TRACKER
