Macro Run Copy Text From Active Cell And Find That Value In Another Sheet
Dec 16, 2008
I would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
What I did is this:
View 5 Replies
ADVERTISEMENT
Apr 15, 2014
Is it possible for a Macro to read a cell say D:11 and copy that email address and send the active sheet to that email?
View 9 Replies
View Related
Jun 23, 2014
I need to find a specific text in column D of sheet2 of my worksheet and copy that row to sheet1 to the last blank cell in column B. The macro should continue to search for the next text and copy rows only if there is active cells in the range column A : C of sheet2. I need a VBA code to do this.
View 5 Replies
View Related
Dec 30, 2011
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
View 9 Replies
View Related
Jul 30, 2009
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
View 9 Replies
View Related
Feb 1, 2009
I am working on getting a macro to find a name in column "B" and once found copy its row to another sheet. I have been working on an "IF" statement that checks for the given name and if true copies the row. I can not get it to keep checking and then stop using "loop" What i got so far:
View 2 Replies
View Related
May 23, 2007
I am having problems getting a VBA search function to work... this is the code I am currently using with very little success:
Sub FindApp()
Selection.Copy
Sheets("Applications").Select
Cells.Find(What:="ADT32109", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Activate
End Sub
What I am trying to achieve is to copy the contents of the active cell in the first sheet and find it within another sheet but I am unable to get the What:= section of the code to take the value of the copied cell.
View 8 Replies
View Related
Nov 5, 2013
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
View 3 Replies
View Related
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
May 11, 2007
I have a workbook with 2 worksheets, A and B. Sheet A contains source data and sheet B a pivot table of this data. I want my user to click on a cell within the pivot table,click a button that runs a macro to find the instance of this value within Sheet A. I did record a macro but it did not work.
View 3 Replies
View Related
May 5, 2012
I am trying to loop through column A and I want to store in an array where I find "App" within the cell value. I am trying to find "App" but will store the whole cell value in the array. I could not figure out the Find method, so I tried the MID function but am having no luck.
Here is my code:
Code:
Sub Arraytest()
Dim arr As Variant, lastrow As Long, i As Long, f As Long, l As Long
f = 0
lastrow = Sheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row
ReDim arr(1 To 1, 1 To lastrow)
[Code] .....
View 1 Replies
View Related
Jul 31, 2012
I have a list of names in coloum D of a worksheet called "Trial", I have another worksheets called "Usage" with this list. I need a macro which can search the name written in Trial worksheet in Usage and worksheet, and activate the found results in usage worksheet.
I cannot use vlookup formulae here as "trial" sheet only has last names, which "usage" sheet has full names.
View 1 Replies
View Related
May 14, 2014
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
View 4 Replies
View Related
Oct 9, 2009
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
View 3 Replies
View Related
Jun 20, 2008
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer
'Dim thiswb As Workbook
officen = Range("A2").Value
Set thiswb = ActiveWorkbook
' Open the Active Info file
Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx"
' Dim sourcewb As Workbook
Set sourcewb = Workbooks.Open"Active 20080616.xls"
Sheets("officen").Select
RowCount = ActiveSheet.UsedRange.Rows.Count
Range("B2").Select.............................
View 8 Replies
View Related
Jul 11, 2014
See attached spreadsheet for reference : MacroHelp.xlsx
I would like the macro to look in column I, and when it finds "TRUE", I'd like it to copy and paste values in all the cells to the left of it.
Reason being is that I want to rid the row of its formula, so the next time someone changes the info (the date the vlookup is searching for) in the tabs those cells are referring to, I will not lose the data it returned previously.
Really all I want is to copy and paste the values in the lowermost row of new information for each plant, but this is the best way I can currently think of.
I've removed the tabs the cells in columns B-G are referring to for sensitivity's sake.
View 2 Replies
View Related
Mar 31, 2014
So ive got this macro that will find the text "SEP" in the active worksheet and paste it into the new worksheet. The Macro looks to see if a row contains "SEP" and copy that whole row and paste it into the new worksheet. I have over 5000 rows in column A that contains "SEP0014A9713685" and "SEP0014A981785C" So they are all different so its not just finding "SEP" So i need some type of Contains "SEP" for column A. This is the macro i have right now.
' Devices that contain SEP
Dim strArray As Variant
Dim wsSource As Worksheet
Dim wsDest As Worksheet
Dim NoRows As Long
Dim DestNoRows As Long
Dim I As Long
[code].....
View 3 Replies
View Related
Mar 4, 2009
I have a workbook with many sheets in it. Within each sheet there is a cell with the Text "March 09" there are then 3 cells to the right of this cell with relevant information. Is there a Macro that can search for this text March 09, then copy this and the 3 cells to the right of it and paste special this information 1 cell below for all 4 cells.
View 2 Replies
View Related
May 13, 2009
I am in the process of writing a VBA code(I should I am fairly new to this code writing!!!).What I need to be able to do is below.(enclosed please find a output in an xls file) What I should be able to do is below:
1.Find the text "Cash(No Listing)(Monthly)"
2. Offset to the 13th Column after that
3.Select the value in this column ,copy the value
4.Go to a row above and move one column to the left i.e.offset (-1,-1) and move 12 column backwards i.e.offset(0,-12)
5.Copy the value in 3 above to this entire range
6.Repeat this process for the entire file
My code is as below.Let me know where am I making a mistake. Just to let you know that this code performs the job well for the first entry i.e in the yellow makde area and doesn't do the job for any further entries .Llooks like I have some problem with the loop but not sure as to whats happening!
View 3 Replies
View Related
Mar 2, 2010
I am creating a macro that will open another workbook and take all the contents off a page in it and paste the contents to itself.
The problem is that sometimes those workbooks will only have one page and it will have the data I need, but sometimes there will be two or three pages in the workbook, but again, with only one sheet that has data on it. How can I have the macro find the one page with data on it?
View 9 Replies
View Related
Aug 20, 2014
I have a workbook that I want to copy two separate ranges from and then post to two different sheets. Range one on the active sheet from A4:K(no of rows will vary) to sheet Savoury Year, and range two A64:K(no of rows will vary) to Site Services Year. When pasting I want to paste it to the next empty row down.
Copy of workbook attached : Weekly Accounts.xls
View 4 Replies
View Related
Oct 2, 2009
I want DELETE the rows that contains 0 (zero or -) in column F (SALDO BRUTO), when I click the Button (Clear). And How I can copy from this sheet to a new sheet in this workbook, but the names of new sheet automatic rename to next date or 2, and next when I click the Button "Copy to New Sheet".
View 2 Replies
View Related
Mar 27, 2014
I am trying to look up a numerical value in Sheet 1 Cell:F7 and find that value in Sheet 2 Column B, then offset 29 columns in the row where the value was found. The number will not have any duplicates within Sheet 2.
View 8 Replies
View Related
Sep 13, 2010
I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.
View 9 Replies
View Related
Apr 7, 2014
I have tried to these through formulas without success but i think i need VBA also which i am not very experienced.
I want to paste a list in the "InsertList" sheet. This list will only contain the word "Correct" or "False". From then on i need a way to search for the word "Correct" or "False" in the columnS P,Q,R,S,T,U,V.
e.g. If in the column "P" on the "InsertList" sheet the word "Correct" is found, i need that entire row from A to V to be copied onto it's destination, in this case "sheet1".
If the word "Correct" is found on the column "Q" on the "InsertList" sheet, the rows from A to V need to be copied in the Sheet2. And so on..
sheet1.png
Attachment: dropbox.com/s/vgs4kzhoa1pip0a/CopyRows.xltm
View 7 Replies
View Related
Jun 10, 2013
I am wanting to create a macro for excel that when run it it will copy the active worksheet and worksheet named "Timesheet" and copy them to a new Excel workbook named the same as the original file + "JobBrief".
View 3 Replies
View Related
Sep 11, 2006
I want to copy data from the current sheet, and past it in the "montly" sheet.
'i and j were defined above, with a Case statement
Range(" Ai:Cj").Select
Selection.Copy
Sheets("monthly").Select
' I want the upper left cell of the pasted area to be A11
Range("A11").Select
ActiveSheet.Paste
I get an error saying that I should select one cell and then paste. But I thought that that is what I did...
View 2 Replies
View Related
Nov 15, 2006
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
View 9 Replies
View Related
May 9, 2014
Looking for a macro that will copy a highlighted range to another sheet. I can get an row to move but not 3 rows.
View 5 Replies
View Related
Jun 3, 2014
My VB looks like this at the moment
[Code]....
What I want to do is when a button is clicked, the range of data in columns 2-9 of the active row gets copied. Then a new sheet is created and the data is then pasted to a range in that new sheet.
The VB I have done so far works fine but its specific to a single range - it doesnt take account of the active row.
View 7 Replies
View Related