Change Sheet Macro Name In A New Copied Workbook.

Jun 27, 2009

I have a workbook, 'MyWb.xls' and a sheet with buttons to which I attach some sheet macros. When I assign a macro to a button I pick the appropriate reference, e.g. Sheet2.MyMacro, and this gets recorded by default as MyWb.xls!Sheet2.MyMacro

When I create a new single sheet workbook with the instruction ActiveSheet.Copy, I end up with a new workbook, say 'Book2' along with the buttons as expected. However the macros attached to the buttons still refer to the MyWB.xls file and not the new 'Book2.xls'. As part of the process of creating the new book I've tried redefining the macro with the instruction

View 4 Replies


ADVERTISEMENT

Assigned Macro Name Does Not Change When Workbook Is Copied And Renamed

Mar 20, 2007

I've created a custom toolbar and populated it with a custom button. I have created a macro and it resides in ThisWorkbook. The macro is assigned to the custom button and the toolbar attached to the workbook. So far, so good. If I copy the workbook and rename it, when I click the button to run the macro it launches the original workbook and runs the macro. The macro effects changes on the renamed workbook copy. The macro name found in the assign macro dialogue starts with the original workbook name. The same effect if the macro resides in a module or sheet. Any known way to have the macro name change along with the renaming of the workbook such taht it refers to the currently opened workbook macros? Regards.

View 5 Replies View Related

Change Sheet Name In Formula When Copied Down

Jan 2, 2007

Suppose I have 100 worksheets in a workbook ( named 1,2 3 ........100) in a collecteve sheet ( I have a coulmn of 100 same formulas refering to the same cell in all the 100 worksheets)

for example :
'1'!$a$1
'2'!$a$1

if I drag the first formula Fill Down With Fill Handle then, the sheet name will be the same all the way down(1) , which is not correct , so I have to go bach and modify them manually , which is very boring and mistakes could easily happen

View 3 Replies View Related

Master Sheet Copied From Other Sheets In Workbook?

Jun 17, 2014

I have a spread sheet with tabs that are for each week of the year. Each tab shows the date on top and times (broken into 30 minute intervals) on the side; the inside has information like an event on the inside.

My goal is to keep that information there and to have a "master sheet" that holds all this information in a list format so I can filter out some information.

View 1 Replies View Related

Disable Macro If Workbook Copied

Mar 11, 2014

I have a Workbook on a shared drive, with a button that runs a macro.

Is there a way to disable this if anyone makes a copy of this workbook, or does Save As? (If it is not the original workbook).

View 6 Replies View Related

Macro Copy Of The Active Sheet And Then Rename The New Copied Sheet

Jul 30, 2009

I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').

"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))

Sub NewMonth()

ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub

View 9 Replies View Related

Macro On Copied Sheet

Oct 16, 2008

Macro on copied sheet. I have a macro using the following to bring a shape to the front:

View 4 Replies View Related

Excel Macro Stops Working In Copied Spreadsheet Within Same Workbook

Jan 4, 2012

I have a simple list of data (Name, Room, etc.) in a spreadsheet. Each day I click on the spreadsheet tab and create a "copy" and (move to end). This creates a spreadsheet for the next day's data.

My problem is that the macro I use to sort this data never works in the newly created spreadsheet within the same workbook. As usual, I'm sure it is something relatively simple that I am overlooking.

View 1 Replies View Related

Speed-up Slow Macro Code: Entries In Column 73 - 85 Will Be Copied From WorkbookRust To The Other Workbook If The Numer In Column 5 Is The Same

Mar 25, 2008

my existing macro, as the run takes to much time to complete. (at least 20min) I've already tried several loops, but no one worked for me. Following situation: There are two excel files, entries in column 73 - 85 will be copied from WorkbookRust to the other workbook if the numer in column 5 is the same. Not every cell within this columns contains data, so the macro should automatically jump to the last entry in each of the above mentioned columns, instead of predefine the range as you see in the code below. After the data is copied to the other workbook, it will be filtered acc. to Sub FilterMain and then copied back to WorkbookRust. As already said, the whole thing works, just to lame.

Sub Allmacros()
Dim WorkbookRust As String
WorkbookRust = ActiveWorkbook.Name
ChDir "C:Documents and Settings vogtMy DocumentsRüstplausch"
Workbooks.Open Filename:= _
"C:Documents and Settings vogtMy DocumentsRüstplauschCH_Revenue_2008.xls"
Sheets("Main_Overview").Select
Windows(WorkbookRust).Activate
Application.run ActiveWorkbook.Name & "!UpdateEntries"
Application.run ActiveWorkbook.Name & "!FilterMain"
'not ask to overwrite existing file
Application.DisplayAlerts = False
Workbooks("CH_Revenue_2008.xls").Save
Workbooks("CH_Revenue_2008.xls").Close
End Sub

Sub UpdateEntries()......................

View 7 Replies View Related

Formula Change To Allow A List To Be Copied.

Jan 9, 2009

I have a formula that basically copies a cell into another workbook if 'other' is entered into the column to the right. i,e cell A1 has 'other' B1 has '100', the figure in B1 is placed into another workbook cell. The results are only shown if a month is selected from a drop down on the 1st workbook with the meta data.

What I want to do is to add a command to the formula below so that it will recognise that after the first item is entered it will look for the next data item and not just repeat the first….

{=IF($L$92:$L$580="","",INDEX($L$92:$L$580,MATCH(1,(TEXT($C$92:$C$580,"mmmm yyyy")=TEXT($E$5,"mmmm yyyy"))*($L$92:$L$580<>""),0)))}

In the attached worksheet is an example of what I want (table 2) and what I'm currently getting (table1)…

View 4 Replies View Related

Data Between Sheets - Copied Cell Does Not Change

Feb 28, 2014

I have copied a data to another sheet. but when i change the data, the copied cell does not change...

View 5 Replies View Related

Fix Cell In Formula So It Wont Change When Copied

Dec 3, 2007

I need to create forumulas for fed,state,medicare,and fica taxes. It has to be an absolute forumula where i use percents. One would be i have my gross pay in column e5, my fed taxes which is 18% in f5, but the 18% is above that in F4.

View 3 Replies View Related

Calculate A Specific Sheet When Something Change In The Workbook

May 25, 2006

I have build an add-in To Calculate Specific Sheet when something change in the workbook. For this I am unselecting the "automatic calculation" option and check "Manual". Now with every change in a cell i would to call AUTO_CALCULATION_PI that is calculating only the sheet that the user have been selected.

The problem when i change a cell Workbook_SheetChange is not stiggered and nothign happen. I dont understand why? The add-in is doing the following. Create a Menu "PI Options", this open a user form where you can select the worksheet to calculate, the choices is store in hidden worksheet called "AUTO-CALCULATION-PI". When a cell is change the Macro AUTO_CALCULATION is called, and calculated the sheets that the user have selected.

View 2 Replies View Related

Workbook Sheet Change Event Prompts Save

Oct 28, 2009

I have many worksheets in a workbook that need to be saved if a user changesanything on them.
These sheet names all end in "....SD" and the code needs to only run on those sheets. I have learned alot from the forum but not enough, just yet . . This is what I have so far:

Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Object
For Each sht In ThisWorkbook.Sheets
If LCase(Right(ws.Name, 2)) = "sd" Then
MsgBox(Prompt:="You must save changes. Save now?", Buttons:=vbYesNo) = vbYes Then ThisWorkbook.Save
End Sub

It doesn't like the 2 "Then's". (Don't laugh - I'm trying.)

View 8 Replies View Related

Macro To Transfer All Data From One Workbook To Specific Sheet In Another Workbook

Feb 23, 2014

I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.

View 8 Replies View Related

Copying Rows In One Workbook To Another - Not All Text Copied

Jul 18, 2013

We keep spreadsheets that have several columns of data, one being "comments" which contains quite a bit of text. I needed to copy some rows off the one workbook into another. Everything copied fine except it cut off part of the comments when I pasted to the new workbook.

View 2 Replies View Related

Closing Workbook By VBA Because Of Copied Data In Clipboard

Oct 5, 2013

I have a workbook from which i copy data and paste in another sheet, then close first excel. But copied data which is stored in memory gives a warning before closing the excel file.

The code i use is:

Sub Macro1()
Worksheets("Output").Range("A7:e1500").ClearContents
Sheets("Sheet1").Select
ChDir (Range("D3").Text)
Workbooks.Open Filename:=(Range("J4").Text)
Sheets("Final output").Select
Range(Range("P5").Text).Select
Selection.Copy
ThisWorkbook.Activate

[code]....

View 2 Replies View Related

Copied Worksheet With Macros Still References Original Workbook

Oct 25, 2007

I have a workbook within which i have a worksheet that contains a lots of macro code (coded by me). As the workbook gets used by various people, i need to copy the worksheet and the macros across to the updated workbook, which doesnt contain the macro worksheet at all.

I have tried to copy it across by clicking on its tab and using the move or copy facility. This copies the sheet across as required. But for some reason, the macros all reference the old workbook. A small bit here for example for some reason opens up the old workbook and then performs the code in the old worksheet:

Sub SelectAll()
For i = 12 To 20
Set curcell = Worksheets("Form Generator").Cells(i, 3)
If curcell = False Then
Cells(i, 3).Value = True
End If
Next i
End Sub

As curcell is equal to worksheets...() i would have expected it to use the local worksheet, ie the one that the macro is attached to. So why is excel proactively hunting out the old workbook and sheet? is the method i used to copy across the sheet with the macros incorrect? If so, how should i go about it?

View 3 Replies View Related

How To Copy Row To Last Row And Paste Copied Rows Directly Below Copied Contents

Oct 20, 2013

with a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.

View 9 Replies View Related

Protect Micro Enabled Workbook Being Copied On External Memory

May 14, 2012

I have this micro enabled workbook and I want to protect it from being copied on other sources.

View 1 Replies View Related

Macro To Change Font Of Entire Workbook

Oct 12, 2010

I have an existing macro that takes my sheet and puts it in body of email.

how do i add to it to change the entire worksheet's font?

Code:
Function RangetoHTML(rng As Range)
Dim fso As Object
Dim ts As Object
Dim sTempFile As String
Dim objWB As Workbook
Dim i As Long
Dim iLastRow As Long
sTempFile = Environ$("temp") & "/" & Format(Now, "dd-mm-yy h-mm-ss") & ".htm"

[code]....

View 4 Replies View Related

Data Not Copied From One Sheet To Other Sheet

Jun 3, 2014

Data is not getting copied from "Best" worksheet row 129 and row 130 (if more rows then all rows ) to "Crashes for Beast Devices" worksheet in "Missing transactions" sheet starting from row 2 . Every thing is working fine in my code except , the if condition which does not paste the value if the "Missing Transaction" sheet is empty.

Code provided below (the underlined portion does not copies data it seems)-

[Code] ........

Sheet attached -

Best.xlsm
Crashes for BEAST devices.xlsx

View 1 Replies View Related

Rename Sheet With Copied Cell?

May 5, 2014

I'm trying to copy the a name from cell X2...JohnDoe and rename the current sheet with the contents of X2. I'm using the following code and getting my sheet named as "True"

Sub SheetName()
'
' SheetName Macro
'
Dim ShName As String
ShName = Range("X2").Select
Selection.Copy
Sheets.Add.Name = ShName
End Sub

View 4 Replies View Related

Buttons Not Wanted On Copied Sheet

Nov 4, 2009

I am copying sheet 1 to the back of the workbook and renaming it. I am using a few command buttons on sheet 1 to trigger the copy macro, etc. I do not want these buttons on the copied sheets.

I have done a right click /Format Control/Properties and selected “Don’t move or size with cells” but the buttons are still being copied and still active for the macro. Perhaps due to sheet copy versus cell copy?

I guess I could add select and delete steps to the macro for the buttons but this seems excessive.

View 5 Replies View Related

Remove Reference From Copied Sheet

Apr 11, 2007

How do I copy a sheet into a new workbook without the formulas referring to the old workbook? For example, formulas end up like this: = SUMIF('[BAS05-07to09.xls]IN'!$B$6:$B$62,101,'[BAS05-07to09.xls]IN'!$E$6:$E$62). I want them to come across as I originally had them, like this: =SUMIF(IN!$B$6:$B$62,101,IN!$E$6:$E$62). here are too many to do it manually each time.

View 6 Replies View Related

Formula Copy & Paste: Reference Other Worksheets Within The Workbook, Are Copied Over As Links

Apr 28, 2007

I'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.

View 4 Replies View Related

VBA - Change Calculation Settings Of Workbook To Speed Up Macro

Sep 29, 2011

I have a range of cells ( C2, C5, C8:N1007, P8:P1007 ....) on a worksheet that I want to be able to clear the contents of through a macro - worksheet is entitled Database

I have 3 additional worksheets all of which have summary information on and some of the formulas are huge.

I've inserted a module and produced this code;

Sub ClearContents()
Application.Calculation = xlCalculationManual
Range("C2, C5, C8:N1007, P8:P1007, ....").ClearContents
Application.Calculation = xlCalculationAutomatic
End Sub

Because of all the 3 summary page formulas the code is taking a few seconds to run.

I'm new to VBA and just wondered whether I could switch the calculation setting for the entire workbook onto manual at the beginning of the code and then switch it back to automatic at the end of the code? Think this might speed things up.

View 5 Replies View Related

Auto Invoice Number Copied Sheet

Apr 27, 2007

auto incrementing my invoices.

The way I do my invoicing is like this. I have 1 Invoice in a worksheet (eg April 1) When I make my invoice for the next day I right click on the April 1 tab at the bottom. Right click/Move copy/move to end &check the create a copy box. It changes to april1(2)I then right click and change the date to the next invoice date. This might seem goofy, but it works for me. I have my Invoice number at the top of the page in cell e2. Is there a formula to automatically increase the invoice number by 1 every time I copy it?

View 9 Replies View Related

Copies A Row To A New Sheet And Adds A Formula To That Copied Row

May 25, 2009

I have written a macro that copies a row to a new sheet and adds a formula to that copied row.

View 8 Replies View Related

Using A Combobox To Select Sheet Where Data Is To Be Copied From A Userform

Feb 6, 2009

The macro below in its current state adds data entered from the userform to a specific sheet. I would like to change it so that a player can be selected from combobox named txtmplayer and the data entered be copied to that specific players sheet.

If this information is vital: There are 8 players. Player sheets can be named player1, player2, and so on. I would like to keep same method for entry (finds first available row)

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved