I want to run a macro to separate File Name and Path from the given complete path
For Example
Code:
In Column A : Given Complete Path " C:MainFolderRecordsSubFilesFile1Record.pdf
I need it separeted like
Code:
In Column B :File Name = Record.pdf
In Column C :File Path = C:MainFolderRecordsSubFilesFile1
Is there any way to do this through a macro
is it possible to configure Excel in order to save the Hyperlink path for a file with absolute path and non relative?
I notice that the hyperlink is ....pdf ry.pdf
if I change the position of the file excel there is a problem!
I would like to save es. d:invoichepdf ry.pdf
I have a variable ("DestFile") that defines a path to a file (used in saving the file)...
I'm in the process of getting a Sub to hyperlink to this file, but in some circumstances, I may only want to hyperlink to the folder, not the actual file...
How would I go about trimming the "DestFile" address to get a "DestFldr" address?...
An example of "DestFile" might be;
S:BryanFor KenGulf ConstructionST0609014-t.xls
(the file name length may vary)
What code can I use to consistently trim it back to;
S:BryanFor KenGulf Construction
as the "DestFldr" variable?
I am trying to separate a filename from a filepath in Excel VBA 2003.
I am using the Application. GetOpenFilename command to get the user to select the correct file.
However, this also seems to record the filepath.
I am trying to separate the filename out of this so that each file( name) activates a different sub procedure.
I am storing the result of the getopenfilename as a Variant.
At the moment I am having to specify the full path in order to get each sub to run. This is fine for 1 user - but not for others as the files are stored in different locations for each user.
What's a proper way - in Excel VBA - to get the current folder *without* the preceding folders/path?
For example from folder "C:oracleora81sqlplusdemo" I'd like to retrieve "demo".
Currently I have:
Code:
DirNames = Split(ThisWorkbook.Path, "")
CurrentFolder = = DirNames(UBound(DirNames))
It works, but I suspect something exists specifically for this one.
How can I run a DOS .bat (batch) file from within a Macro? This is what I came up with so far and it seems to work. The only thing is that I need this to have relative paths, running from the same directory the Excel Workbook is in.
View 2 Replies View Relatedhi, i need a macro that will open the below file path, and when i select the file i would like the macro to copy the active sheet from the source file being opened from range A2:L10000 and then paste special values to destination CELL A16 of the activesheet of the workbook.
I would like the date format for the below to be generic so it will apply for all months and years.
S:RECSBANKRECNominees200812-2008
I have a macro in excel that saves to an external text file, but the excel workbook (and the text file) will be copied to different folders so i need it to alway read the file from the location the worksheet was opened from. I hope that makes sense
Ive tried using ActiveWorkBook.path but that doesnt work, maybe im just using it the wrong way
I have a spreadsheet with a macro that saves a backup s/s to a particular folder, but the problem I have need the macro to check the filepath is that of the original s/s before running.
Its so that when people take copies of the main s/s and save them to their desktop I dont want the copies being saved in the backup folder
macro is below
Private Sub Workbook_BeforeClose(Cancel As Boolean)
If ActiveWorkbook.ReadOnly Then Exit Sub
If MsgBox("Do You Want To Save A Backup?", vbYesNo) = vbNo Then Exit Sub
Dim fso As Object
Dim objFiles As Object
Dim myWkBk As String
Dim myFName As String
Dim BkUpDir As String
Dim CountFiles As Integer
Dim mydate As Double
BkUpDir = "k:singstatappealsappeals trackerBackups"
Set fso = CreateObject("Scripting.FileSystemObject")
Set objFiles = fso.GetFolder(BkUpDir).Files
On Error Resume Next
'the actual counting of files takes place here.
If Err.Number 0 Then
CountFiles = 0
Else
CountFiles = objFiles.Count
End If
If CountFiles > 4 Then
MsgBox "You have " & CountFiles & " saved workbooks. Perhaps you should delete some?"
End If
mydate = Format(Now(), "ddmmyy")
myWkBk = ActiveWorkbook.Name
myFName = ActiveWorkbook.FullName
fso.CopyFile myFName, BkUpDir & mydate & myWkBk
End Sub
I have code to create a new workbook, and when I try to rename it I get "Compile error: Can't assign to read-only property."
Dim objXlApp As Object
Dim wkb As Workbook
Dim wks As Worksheet
Set objXlApp = CreateObject("Excel.Application")
' Create a workbook
Set wkb = objXlApp.Workbooks.Add
' Delete all worksheets bar the first one.
For Each wks In wkb.Worksheets
If Not wks.Index = 1 Then
wks.Delete
End If
Next wks
'Create some worksheets and names
With wkb
.Worksheets(1).Name = "myWorksheet1"
.Worksheets.Add.Name = "myWorksheet2"
.Worksheets.Add.Name = "myWorksheet3"
.Worksheets.Add.Name = "myWorksheet4"
End With...................................
I want to create a macro that saves my file this way:
in a folder named after B2
and
as a file named after B4n.
I am using an XY scatter chart that displays the planned path and an actual path as I go. The planned path is set up in 100' increments and goes 12000' and actual path varies along the way.
My data that I use is the Northing (ft), Easting (ft) and Vertical Section (ft) for both the planned path and actual path.
I was wondering if there was an east way to get that information from the chart or if there is a formula that would allow me to calculate distance between the two points by using the data I use for my chart.
I need a macro to do the following
1.Get list of .xls files from specified folder.
2.Append the files in new workbook in same folder.
Ex:
D:/users/excel/Sample_sheet1.xls
D:/users/excel/Sample_sheet2.xls
D:/users/excel/Sample_sheet3.xls
I want to get the list of Sample_*.xls and
create Sample.xls master file which adds the above three .xls as sheets in it.
Actually my macro as below
I have a report send to me daily. And I want to have a macro to save this report in the daily folder, such as “c:
eports8052008”, so tomorrow 's folder would be “c:eports8062008”.
All the daily folders already exist. Just need to change the file path. I tried some codes including sPath and format(now(), “mmddyyyy”), get error message.
I have got a master workbook and I have written macro to copy and paste data on another workbook. write a macro to save the new workbook to a file path with a file name where both file name and path are stored in master workbook sheet...
View 5 Replies View RelatedI'm using this code to import a file, but I want to be able to save just the path (with no file name) to a variable to use for the output file. This code saves the path and file.
FileName = Application. GetOpenFilename _
FileFilter:=Filt, FilterIndex:=FilterIndex, Title:=Title)
Any help would be greatly appreciated. I didn't know but what there was a function that I could apply to the 'FileName' variable that would remove the file name...don't know.
how can I refere to the path whaere my addin is located without having to write it
i tried with this, but....................
Sub AddingAddIn()
Dim p
p = Application.Path
AddIns.Add Filename:=("path")
AddIns("HTML").Installed = True
End Sub
How can I get the name of a workbook WITHOUT the path when I have the name WITH the path?
To be more specific. When I use "Application. GetOpenFilename" the result is a file name for say "my_book" including the path. With this I can open the file using "Workbooks.Open" and Excel will show me "my_book". But when I want to reference this workbook later on in say "Workbooks(my_book)", then I need the file name without the path. How can I get that one in VBA?
Till now I was using "CurDir" to find out the path after opening the file and just subtracted it from the full file name. This seamed to be fine. But now I had a situation where CurDir gave me a path with abbreviations (~),
I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
I am trying to import some csv files so I can combine them, but am having probs with the filename and location.
Sub test()
Dim wsName As String
wsName = ActiveCell
Sheets("Data").Select
With ActiveSheet.UsedRange
LastRow = .SpecialCells(11).Row
End With
With ActiveSheet.QueryTables.Add(Connection:="TEXT; &thisWorkbook.Path &" " & wsName &", Destination:= Range("A" & LastRow))
.Name = wsName
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.RefreshStyle = xlInsertDeleteCells.....................
How could i get the below code to work with a variable as the file name?
Or could I use something like "thisfile" to determine where to import to.
[Code] .....
I have a WinForm, which I'm calling via VBA's Shell command:
Code:
Sub Button1_Click()
Shell "C:TemplateFuncitons.exe " + ActiveWorkbook.FullName, 1
End Sub
I made this module an Excel Add-in and added it as a button in the quick access toolbar. Now, the idea is for the WinForm.exe and the Excel.xla to always be in the same directory (go hand in hand). I want to make a relative path for the .exe which will be the path to the folder where the .xla is + the string "TemplateFunctions.exe" in the end.
I am having trouble with a macro of mine. Essentially it opens a file, based on user input (Full path is stored in variable FilePath), but then I want to select that workbook, and therefore need just the .xls filename. I figured I would create a new variable, FileName, to pull out the filename.
How can I edit the string in my macro to extract just the filename.xls from the full path?
I have a UserForm with a button that, when clicked, opens up a File Directory Browser that the user can select the file of their choice.
The code is below :
Private Sub DirectoryBrowser_Click()
Dim fn
fn = Application.GetOpenFilename 'can add parameters. See help for details.
If fn = False Then
MsgBox "Nothing Chosen"
Else
MsgBox "You chose " & fn
'now that you have the name, you can open it or do something else
End If
Workbooks.Open fn
End Sub
What I would like is the filepath (of the file they choose) to appear as the displayed caption on another button or label.
We have built quite a large Excel based program that contains quite a lot of coding. the program seems to work fine the majority of the time but every so often we recieve an error message that causes excel to not save, or to crash and shut down.
The message that comes up is "File/Path Error"
Now I've just done some hunting around online and some links I have found speak of declairing the document location correctly in the coding. I was wondering could this be the issue at hand?
Anytime the document needs to save, there is a cell with the directory path and file path declared as a variable (Actually as Dim String) within the coding. Is this the best way to declare a file path?
Also, the problem seems intermittent. We Compile the VBA coding before saving, we also use a Clean Project add-in within Excel. These processes usually help but every so often the problem comes back.
How to save a file, with file- name. but the directory is to be read in worksheet "towns" in Cell1 (brussels) and filename in worksheet "names" in cell B2 (i.e. winter), so it saves to c:russelswinter.txt as a wordpad or kladblok txt file, that keeps a number, so each time we push a button "go back from worksheet names to worksheet towns" the "number" that is saved in the txt document goes up by value +1. In Flemisch, the "old" code goes as follows, and saves the number in the txt file Factuurnummer7.txt. But I want that the file name (here: FactuurNummer7) can be a variable text issue, which has to be read - as already noticed - in cell B2 (with the word WINTER). So the are 2 worksheets: towns, ans names
pad$ = Application.DefaultFilePath
'controle = Dir(pad$ + "FactuurNummer7.txt")
'If controle = "" Then GoTo EerstAanmaken
'Open pad$ + "Factuurnummer7.txt" For Input As #10
'Input #10, Nummer1
'Close #10......................
Below is the current code I have for File Copy before the workbook closes. This file will be distributed all over and obviously will not have the same old path and new path locations as I have in my code also will not have the same file name. Is there anyway to still perform the file copy without knowing the old path and file name and possibly have message box pop up to ask the copy to location and use that in the new path string?
Sub Macro1()
Dim fs As Object
Dim oldPath As String, newPath As String
oldPath = "I:EXLDATAMC Daily" '<---Where the file is currently located
newPath = "H:South RegionOrlando Mail Services2008DI" 'Since the super shared drive is super slow we will just copy and replace this file each time before we close and of course after we save
Set fs = CreateObject("Scripting.FileSystemObject")
fs.CopyFile oldPath & "" & "OrlandoMail.xls", newPath & "" & "OrlandoMail.xls"
Set fs = Nothing
End Sub
I am looking to have these workbooks save automatically to a folder on the C: drive.
If the folder I specify is not available on the C: drive, how do I write teh save comand to create it automatically with a prompt
I have a file which is kept on the C Drive. Each day, a different excel file is downloaded to a usb memory stick. The first file reads data from this file. The problem is, the drive letter keeps changing from E to F and the macro then crashes out.
The file on the memory stick always has the same name, so is there a macro to find the drive letter of this file and then use it in my existing macro?
How can I make the files path independent. Lets say I have 6 workbooks, one of them having macro that connects all the six books. While working on my pc, I entered the file locations by myself. The macro runs fine.
Now I have to send the files to someone and would not like them to add their download directory at most places in the code. I want that after downloading, they have to only open the main file and press the button to run macro. How should I do that.
Right now am using this approach:-
sub main{
str 1file;
set 1file = Workbooks.Open ("c:/downloads...../1stfile.xls")
and similar code for calling other files.