Plan Path And Actual Path Distance Calculation?

Feb 11, 2014

I am using an XY scatter chart that displays the planned path and an actual path as I go. The planned path is set up in 100' increments and goes 12000' and actual path varies along the way.

My data that I use is the Northing (ft), Easting (ft) and Vertical Section (ft) for both the planned path and actual path.

I was wondering if there was an east way to get that information from the chart or if there is a formula that would allow me to calculate distance between the two points by using the data I use for my chart.

View 1 Replies


ADVERTISEMENT

Save Hyperlink Path For File With Absolute Path And Non-Relative?

Mar 4, 2013

is it possible to configure Excel in order to save the Hyperlink path for a file with absolute path and non relative?

I notice that the hyperlink is ....pdf ry.pdf

if I change the position of the file excel there is a problem!

I would like to save es. d:invoichepdf ry.pdf

View 1 Replies View Related

Macro To Separate File Name And Path From Complete Path

Oct 3, 2012

I want to run a macro to separate File Name and Path from the given complete path

For Example

Code:

In Column A : Given Complete Path " C:MainFolderRecordsSubFilesFile1Record.pdf

I need it separeted like

Code:

In Column B :File Name = Record.pdf
In Column C :File Path = C:MainFolderRecordsSubFilesFile1

Is there any way to do this through a macro

View 2 Replies View Related

Excel 2010 :: How To Insert Path Of Image Rather Than Actual Image Itself

Nov 4, 2013

I need to find an easy way to locate an image on my server and upon selection rather than inserting the actual image I need to insert the image path. e.g. "s:imageshighresgreen1234.jpg"

View 3 Replies View Related

Actual Vs. Plan In Pivot Table

Mar 23, 2007

I've attached a simplified worksheet which tracks the calls of a team of salespeople along with a pivot table showing their results for Jan-Mar. I've also included a summary of their planned calls for the period. Ideally what I'd like to do is have the pivot table show actual calls, planned calls and variance for each salesperson and each month as seen on A37-J42.

View 6 Replies View Related

Trim Full File Name & Path To File Path Only

Sep 27, 2006

I have a variable ("DestFile") that defines a path to a file (used in saving the file)...

I'm in the process of getting a Sub to hyperlink to this file, but in some circumstances, I may only want to hyperlink to the folder, not the actual file...

How would I go about trimming the "DestFile" address to get a "DestFldr" address?...

An example of "DestFile" might be;
S:BryanFor KenGulf ConstructionST0609014-t.xls
(the file name length may vary)
What code can I use to consistently trim it back to;
S:BryanFor KenGulf Construction
as the "DestFldr" variable?

View 4 Replies View Related

Distance To Default Calculation Using Excel?

Mar 16, 2013

how to to calculate the distance to default using excel. Or send e some previos work sheets that i can follow how it is done

View 1 Replies View Related

Minimum Distance Calculation Of Geographic Coordinates Using Array

Jun 9, 2006

I am working on two spreadsheets, one we shall call Target Sheet and the other Reference Sheet.

On the target sheet, I have a set of 200 geographic coordinates longitude and latitude (in decimal degrees). Each pair of coordinates coresponds to a geographic site.

On the reference sheet, I have a set of 900 geographic coordinates longitude and latitude (in decimal degrees). Each pair of coordinates coresponds to a geographic site. Note that of the 900, 200 are the same from target sheet, other 700 are different sites.

Using the spherical law of cosines, I can calculate the distance between a set of coordinates on target sheet agianst a set of coordinates on reference sheet. This allows me to see the distance from one geographic site, to the other. This was easy. The formula I use is as follows: ....

View 9 Replies View Related

Get Path To XLA

May 6, 2009

Get Path to XLA ...

View 8 Replies View Related

How To Get Path From GUI

Mar 27, 2012

How to get the get the path from the GUI in Excel-VBA or select the path

and how to declare it as universal...

View 2 Replies View Related

Dynamic Path

Jul 1, 2008

How do I assign the path of the workbook I currently have active, to open various other files?

I want to make the path for opening various files dynamic. All the files will be saved in the same folder, but in different locations.

View 9 Replies View Related

Set Path To Cell Value

Dec 24, 2008

How do I setup MyPath to a cell reference? In this case I need to set MyPath to the cell value of I1

Code that I have that doesn't work...

Sub SaveToFolder()
'Save File to Path
MyPath = I1
ActiveWorkbook.SaveAs Filename:=MyPath & ActiveWorkbook.Name
Windows("PE Console.xls").Activate
End Sub

View 9 Replies View Related

Get A File Path Using Vba

Jun 3, 2004

I'm using this code to import a file, but I want to be able to save just the path (with no file name) to a variable to use for the output file. This code saves the path and file.

FileName = Application. GetOpenFilename _
FileFilter:=Filt, FilterIndex:=FilterIndex, Title:=Title)

Any help would be greatly appreciated. I didn't know but what there was a function that I could apply to the 'FileName' variable that would remove the file name...don't know.

View 9 Replies View Related

Use The Path Of My File

Mar 23, 2005

how can I refere to the path whaere my addin is located without having to write it
i tried with this, but....................

Sub AddingAddIn()
Dim p
p = Application.Path
AddIns.Add Filename:=("path")
AddIns("HTML").Installed = True
End Sub

View 9 Replies View Related

Get Folder Name & Path

Jan 4, 2007

I want to know how to index a drop down list to be used for calculations.

Up until now I was using

Range("B1").Select 'the cell where the drop down list is
ActiveCell.Formula = SiteID 'site id

But for whatever reason it trims a trailing zero from SiteID when setting it in the second line. SiteID is a VBA string.

Indexing it would work, as would preserving the zero so help on either one is appreciated. Auto Merged Post Until 24 Hrs Passes;Correction, I lied. I was using this line to set it.

Range("B1").Select 'the cell where the drop down list is
ActiveCell.FormulaR1C1 = SiteID 'site id

View 5 Replies View Related

Get Rid Of Path In File Name

Apr 26, 2007

How can I get the name of a workbook WITHOUT the path when I have the name WITH the path?

To be more specific. When I use "Application. GetOpenFilename" the result is a file name for say "my_book" including the path. With this I can open the file using "Workbooks.Open" and Excel will show me "my_book". But when I want to reference this workbook later on in say "Workbooks(my_book)", then I need the file name without the path. How can I get that one in VBA?

Till now I was using "CurDir" to find out the path after opening the file and just subtracted it from the full file name. This seamed to be fine. But now I had a situation where CurDir gave me a path with abbreviations (~),

View 9 Replies View Related

Variable For File Name Or Path Name?

Jun 25, 2014

How could i get the below code to work with a variable as the file name?

Or could I use something like "thisfile" to determine where to import to.

[Code] .....

View 5 Replies View Related

Shortest Path Between Cells (VBA)

Mar 2, 2014

I am working on a project to clear festival events with simulation. Therefore I need a grid of Excel cells (the field), let's say 11x11 (B2:L12). And the exit is in cell A7.

I am looking for an algorithm which fills this field with distances to the exit. For horizontal and vertical movements the distance is 1, and for diagonal movements the distance is 1.5

Say I made a class Coordinate which has two points, X & Y I declare a variable point, as the location I am in (the active cell) and a constant exit (the coordinate of the exit)

And then I would like a function in VBA which does:

[Code] ......

How to approach this?

View 6 Replies View Related

Using Cell(s) References In Path

Sep 17, 2009

I'm trying to copy a file from one directory to another directory. However, the source directory, I'd like to have it so it's created from values within specific cells on a Sheet named "PULL".

When trying the following, I get an error permission denied.

View 14 Replies View Related

Save Path Is Incorrect

May 27, 2009

I have the following code, taken from an example off the web. But I would like to change the save path to just C/: rather than copy the save path of the original file...I would also like to not close the active workbook that I am working in....how can i achieve this?

Sub TwoSheetsAndYourOut()
Dim NewName As String
Dim nm As Name
Dim ws As Worksheet

If MsgBox("Copy specific sheets to a new workbook" & vbCr & _
"New sheets will be pasted as values, named ranges removed" _
, vbYesNo, "NewCopy") = vbNo Then Exit Sub

With Application
.ScreenUpdating = False

On Error GoTo ErrCatcher
Sheets(Array("Copy Me", "Copy Me2")).Copy
On Error GoTo 0
For Each ws In ActiveWorkbook.Worksheets
ws.Cells.Copy
ws.[A1].PasteSpecial Paste:=xlValues....................

View 2 Replies View Related

How To Incorporate Variable Into Path

Feb 8, 2012

I am using a script within excel as part of this script I want create a new folder to store information

Code:

ChDir "C:Documents and SettingsAdminDesktopMIKEPAYROLL2011-12"

However I want to use a variable called "NEWYEAR" which holds the 2011-12 part

For example this part stays the same

ChDir "C:Documents and SettingsAdminDesktopMIKEPAYROLL

folder 2011-12 held in variable NEWYEAR may or maynot exist.

if the folder exists I want to be able to use the folder, however if it doesn't I need to create it.

The problem is I am not sure how to incorporate the variable into the path.

View 5 Replies View Related

Find Path With Only Having Folder Name

Apr 11, 2012

Is there a way to find a folders path? I have a folder Dropbox

I want to find the path up to this folder on the current computer. Is there a method to accomplish this?

I am fine if you want to give VBA code so I can put it in my immediate window for now and then I can attempt to add it to existing code later.

So an Example of the possible result would be
Directory is C:MyNameUserDropbox
Or on another computer maybe C:User1ListingFilesDropbox

View 9 Replies View Related

Get Current User Path In VBA

Jan 31, 2014

I am using this code to import excel files into one workbook..I have the path hard coded. Is there a way to get this automatically so if another person is running on there machine it will work..

OR

can you define the path in like cell A1 and have it pull from there?

Sub GetSheets()
Path = "C:UserswharnedDownloads"
Filename = Dir(Path & "*.xls")
Do While Filename ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
For Each Sheet In ActiveWorkbook.Sheets
Sheet.Copy After:=ThisWorkbook.Sheets(1)
Next Sheet
Workbooks(Filename).Close
Filename = Dir()
Loop
End Sub

View 3 Replies View Related

Relative File Path VBA?

Feb 28, 2014

I have a WinForm, which I'm calling via VBA's Shell command:

Code:
Sub Button1_Click()
Shell "C:TemplateFuncitons.exe " + ActiveWorkbook.FullName, 1
End Sub

I made this module an Excel Add-in and added it as a button in the quick access toolbar. Now, the idea is for the WinForm.exe and the Excel.xla to always be in the same directory (go hand in hand). I want to make a relative path for the .exe which will be the path to the folder where the .xla is + the string "TemplateFunctions.exe" in the end.

View 5 Replies View Related

Save .txt To .xls Using Existing Name And Path

Apr 18, 2007

how do i save a text file to xls in code. i want the new .xls file to appear alongside the original .txt file.

View 9 Replies View Related

To FIND The Filename In A Path

Dec 20, 2007

I'm trying to FIND the filename in a path such as:
F:userdjleeCSCAV Remarks.png

My path is different for each record.

I tried =RIGHT(C1,FIND("",C1)), but it does not recognize the "".

View 9 Replies View Related

Extract File Name From Path

Jan 10, 2008

I am having trouble with a macro of mine. Essentially it opens a file, based on user input (Full path is stored in variable FilePath), but then I want to select that workbook, and therefore need just the .xls filename. I figured I would create a new variable, FileName, to pull out the filename.

How can I edit the string in my macro to extract just the filename.xls from the full path?

View 9 Replies View Related

Hyperlink Initial Path

Aug 14, 2008

When inserting a hyperlink in an Excel cell, the default pathname for the new link is always the current pathname of the workbook. After navigating to a distant pathname and inserting a hyperlink, inserting the next hyperlink in the next cell starts all over again at the current path.

Is there a method of telling Excel to start looking in z:\ABC instead of the current path? This would eliminate navigating through the entire path for each link.

A macro that handles the hyperlink and puts up a navigation window or something like that would be ok.

View 9 Replies View Related

Return File Path

Dec 2, 2008

I have a UserForm with a button that, when clicked, opens up a File Directory Browser that the user can select the file of their choice.

The code is below :

Private Sub DirectoryBrowser_Click()
Dim fn
fn = Application.GetOpenFilename 'can add parameters. See help for details.
If fn = False Then
MsgBox "Nothing Chosen"
Else
MsgBox "You chose " & fn
'now that you have the name, you can open it or do something else
End If
Workbooks.Open fn
End Sub

What I would like is the filepath (of the file they choose) to appear as the displayed caption on another button or label.

View 9 Replies View Related

Convert Path Name To Short

Jul 8, 2009

I've got a variable path for a file stored in a cell inside a worksheet that I need to convert to the old dos format (no spaces).

From c:Awesome FileFTPMy Awesome File.txt

to c:Awesom~1FTPMy~1.txt

The actual path/file name is much longer and is determined by multiple fillable fields, cells, and drop down menu's so the only feasible way at the moment seems to be that I need some code to convert the file/path name all at once.

After doing a little searching on google I came up with several that could determine the short path name of the actual workbook, but none that could convert a path that was different from the workbook.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved