I keep recording this macro, but the problem I run into is that the active sheet is always the specific name of the sheet. I need a general name so that the macro will work on any given sheet. On the sheet I am viewing, I simply want to change the tab color to black using a macro.
View 2 RepliesI use the following code to change several colors in my worksheet.
View 9 Replies View Relatedmacro that will change the cell color based on text? I have a list of titles in column B. Everytime the word 'Car' is found in this column, I would like to change the font color in columns C-G to the color white within the same row.
View 9 Replies View RelatedWhen the sum of B7-D7 is less than cell (I7) I would like to change the shade of B7-D7 to orange to indicate that larger values need to be entered to equal the value of cell I7. And when the sum of these three cells does equal I7 their color should change to green. I recorded two macros to change the colors and I've run them to verify they work. But I've got something off in my simple macro below.
[Code] .....
I am trying to color a cell with a macro. I am using
ActiveCell.Offset(a,b).Value= a number then a want to change the color of the cell to yellow. When I tried to code this, my Active cell's color is changed, but not the offset cell.
How do I change the color in an "offset cell".
I am making a checklist for a Pda program. I need the active cell to highlight green and put an x in it for a specified range. This I have
The next part I cannot figure out -
after the cell have been highlighted once, and properly colored with an x, how can I get it to delete the fill and clear the x on the next click.
Dim x As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
' Set the highlighted cell to a color.
If Not Intersect(Target, Range("d28:d34")) Is Nothing Then
Target.Interior.ColorIndex = 4 ' green = true
'Set the highlighted cell to contain a text character
If Not Intersect(Target, Range("d28:d34")) Is Nothing Then
ActiveCell = "x"
End If
End If
End Sub
I have a spreadsheet that contains the 5 digit numbers in the rows and the columns respecstively. I'd like a formular or macro to change font color for each cell. If the combined value of the 5 rows are greater or less than the combined range 87030 and 87200, the 5 cells will be changed to Red. If:.........
View 4 Replies View Relatedcreating a macro. I would like the background color of certain cells under column A (cells 12:25, 27:32, 34:38, 40:45, 47:51, 53:61, 63:70, 72:79, 81:88, 90:92) to change to the color green and display the text "Complete" on mouseclick.
Before the cell is clicked, it would be the color red, with no text. (I'm not sure if you need to know that).
Next, I would need a macro that resets everything back to red. I hope this macro could be assigned to a form button.
My boss wants a spreadsheet that has multiple buttons on it that will change the background color of a specific cell to four different colors. Example:
Text written in Cell B3, Button in Cell A3 that will change the Background color of Cell B3 to either Green, Yellow, Red or Blue.
There will be a lot of buttons on this worksheet following the same format as above. I don't want to change the value of what is in the cell, just the background color.
I have a macro code for conditional formatting. The first 2 lines of the macro are
Private Sub Worksheet_Change(ByVal Target As Range) ....
In my Excel 2003 worksheet, I need the row color to automatically change to blue (color 5) (bgcolor = #0000FF) - when the user changes the text from VALID to INVALID in the range: B3:B65000.
For example:
Cell B5 contains the text: VALID
When the user changes the text in the field to read: INVALID - then I need the row range: A5:W5 to change to the color blue.
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View RelatedI have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedI have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
I wrote a macro to color the cell values in the rows based on their average value. For eg if the cell value is less than 0.2 Avg, they should be red color,if value is between 0.2 and 0.5 it should be yellow. This part is working fine
Now based on the color of the rows cells , need to write a macro for the header one. Logic is Coloum header should be in red colour, if in one or more number of rows cells are red. same with yellow ones. Could you please help me out in solving this with logic.
I have a spreadsheet that i download from the net daily, which is seperated into columns of information.
I want to be able to look down a column and mark a cell in a seperate column if the cell font text is red.
For example looking down column A ... if the font text of a1 is red then mark the cell background colour of T1 red - if a2 text colour is red then mark the cell T2 red .... etc etc.
If the font colour in a1 or a2 ... etc etc is any other colour then do nothing.
I have 5 columns I wish to look down and mark in 5 seperate columns - I have tried to do this by conditional formating but don't know the fomula for checking font colour.
What I would like to do is to have the color of a tab change as the dependant upon the value of one or more cells.
View 9 Replies View RelatedTry to find a way to automatically change the color of a row, based in changing the name in column A.
I tried conditional formatting but the name (or dates) in column A are not the same (always other and other).
I failed to adapt any VBA CODE (found in GOOGLE) because column A varies a lot.
Annex a photo and an excel example.
EXAMPLE FORUM HELP.jpg
EXAMPLE 1.xlsx
What formula do i use if i want the text in cell A1 to change to red if any entry is made in cell B1.
View 2 Replies View RelatedI am having some color problems. From A2:AB2000 I have different fill colors for cells all over the place. The only color I need is the color purple which I believe is the color “39”.
So basically all cells except the cells with the color purple change to white from A2:AB2000. I would like to add this code to the macro I have already created.
I have a given som (general) range where I would like a function to change the background color of every second row in a visual basic function.
One could of course just loop through it and use the mod function, but I think there has to be something quicker.
I know about conditional formatting, but it is something I need to use over and over again on Ranges that will differ in size so I would like it to be a function I can just run as part of a sub.
I'm trying to create a spreadsheet with columns a, b, c, and d. "a" always has a value and I want columns c and d to change to a's color when they are given values. if "b" has a value when the data for c and d is entered, i want them to take b's color instead. The part I don't know how to do is that if i decide to give "b" a value, I don't want "c" or "d" to change colors if they already have values. e.g. if only a has a value when i give one to c, c will take a's color, but then if i give b a value then d, i want d to take b's color and c to retain a's color.
View 14 Replies View RelatedUsing Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range) I can execute code when values in the cell change, but it can't check if the foreground or background color changes. What event can detect this? If no event can, is there any way at all?
Found this, I will look into this loop: Capturing cell color change in VBA
I'm trying to put together a script which changes the color of the row in columns A:AE if any cell in the Range B7:B400 has the value of 'No'. If it has the value of 'Yes' I would like it to Exit Sub.
I've put together the code below to try an create this function, but I'm running into a few problems.
Code:
If Intersect(Target, Range("B7:B400")) Is Nothing Then Exit Sub
If Selection.Cells.Count > 1 Then Exit Sub
If Target "No" Then[code]....
When the value of any cell in Range B7:B400 is 'Yes' the row changes to grey, if I enter 'No' it removes all cell shading from the row, and I'm not very clear on what changes I need to make.
I am in need of a way to change the color of text in a cell to red if that cell contains a dollar sign ($) and if it dosen't contain a dollar sign ($) for the text to be black. I want this to happen automatically without having to run a macro, is this possible?
View 9 Replies View RelatedI've got some spread sheets that I send out. People fill them out and send them back to me. The only problem is that I dont know which cells they've changed and which cells they've left. Is thier a way to tell VB to change the color of a cell if the value has changed
View 9 Replies View RelatedI have to check a cell to see if ti has a date in it, if so , then i have to check the current date to another cell, if the current date is greater then that cell i want to change the color of the cell