I have a large workseet that I want to Delete all rows where value in column Q is > 9.99 and < 60.00. So the only rows left would be where column Q value is < 9.99 and > 59.99. (deleting out the middle amounts) I think this might be a nested If stmt but have not figured it out so I'm not sure if there is another way.
View 4 Replies
I need some assistance with a simple macro. Im clueless when it comes to macros.
Heres what I have:
column "e" contains the year built for homes. Some of the fields contain "9999" or "0000" or blank. I need to delete these entire rows. If the year is between 1900 and 2020 I would consider it valid and keep the row.
So I need a macro that says something like this:
if column "e" is not between 1900 and 2020 delete the entire row.
I currently had to start from scratch as my formula kept raising the debug screen. I know the answer is simple but I cant figure out what it is. I have column A, rows 9 through 1000 with data. I want to delete the entire row of any "x" value present in column A rows 9 through 1000. I am new to VBA. So simple is good.
View 2 Replies View RelatedI need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.
Need to solve my problem in the thread "Type Mismatch Error Message". Now a new problem has come up in the same code, so - according to the rules - I've started a new thread. (This one is most likely due to my poor knowledge of VBA syntax).
Sub Delete_invalid_rows()
Dim i%, j%
Dim Nr%, valid As Boolean, BYPdata As Boolean
Dim ar1 As Variant
Dim ar2 As Variant
Dim ar3 As Variant
Dim ar4 As Variant
Nr = 20
ar1 = Array(11, 14, 19, _
20, 22, 25, 26, 27, 28, 29, _
30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, _ .................
I need a macro to delete a specific range of rows. For example below:
UK
Manchester
London
Chelsea
Birmingham
[Code]....
Each line represents a row. If a cell matches "JAPAN" then the macro needs to delete all the rows relating to it (in this case all the cities that are based in Japan). So after running the macro my list will have:
UK
Manchester
London
Chelsea
Birmingham
[Code]....
I've got a code that generates some worksheets in a fairly large workbook. The code is run monthly and replaces the already existing worksheets.
The problem is that each newly generated worksheets contains more than 1 million rows, which means that the size of each worksheet is around 5MB.
I need a code which allows me to delete all blank rows starting with row 1000 in those worksheets.
I have a named range and I want to delete the rows which have zero value in the named range.
View 6 Replies View RelatedI am trying to delete all the empty rows in a range. What I currently have deletes the rows but skips over a lot as the code runs. Below is what I currently have.
Code:
'msgbox delete blanks???
If MsgBox("Are you sure you want to delete ALL the blank rows in the chart?", vbYesNo, "Delete Blanks?") = vbNo Then
Exit Sub
[Code].....
On sheet2 Range L4:L2000 I have starting dates entered in mm/dd/yy format. On sheet2 Range M4:M2000 I have finish dates entered in mm/dd/yy format.
On sheet3 I have a numeric value of mmddyy (no brackets) in cell BC4.
What i'm looking to do is if the numeric value on sheet3 BC4 does not fall between the start and finish dates on sheet2, then the entire row should be deleted. Can this be done with the different date formats (Brackets vs no brackets)
I have read all the tutorials and examples of how to delete rows IF the row contains no data within a worksheet or workbook.
I don't want all rows deleted, just rows within a set range.
I can't find any reference to deleting blank rows within a range, just the entire workbook or worksheet.
I need to delete a certain range of Rows in a single column
View 3 Replies View RelatedI am not sure of the VBA code to delete enitre row if a cell is empty only within a range, then Ascend according to that Row's Values and show the
Rank No's only on what Rows that remain.
The end result example is in Sheet2
I want to delete all the rows with values between -1 and 1 in column 'I'. I currently set up a macro to do the formatting and conditional stuff that highlights all values above 1 and below -1 - these are the values I need to conduct my analysis on, but I can't figure out how to delete the rows in between. The worksheet has approximately 5,000 rows (and growing) and this would help me clean up the data significantly.
View 7 Replies View Relatedi wrote this macro and want to delete last two rows on active sheet this macro.
Sub deleteLast2Rows()
With ThisWorkbook.Worksheets(1)
Dim rowNum As Integer
Dim m As Range
rowNum = 2
Set m = .Range("A" & rowNum)
rowNum = rowNum - 2
EntireRow.Delete
End With
End Sub
I have a huge spreadsheet that I want to be able to sort through and delete the unwanted rows. I want to do a search for anything in column C that equals 2225 including the next row after and delete the rest. Here is an example...
View 3 Replies View RelatedI recorded this macro but I need it to delete any Rows that have the word "Normal" in column F
Sub Count()
'
' Count Macro
' Macro recorded 5/22/2007 by pricci
'
'
Sheets("Alarm Log").Select
Sheets("Alarm Log").Copy After:=Sheets(2)
Sheets("Alarm Log (2)").Select
Sheets("Alarm Log (2)").Name = "Count"
Cells.Select
Selection.Sort Key1:=Range("F2"), Order1:=xlAscending, Header:=xlYes, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
I want to delete the rows if in "Column L" value is "Yes".
View 9 Replies View Relatedmacro to delete certain rows from a sheet based on the value of a cell?
I'm tryin to get it so if the value in "F" is NOT 150, 151, 152, 153, 154, then i want that row deleted.
this should leave me with data that contains either 150 - 154 in column F.
I have a table of data A2:H1000 (this gets longer every week). Within that data every so often i have a row which is blank from A:G, but has a value in H.
I want to create some code that checks the rows and if the cell A in the row is blank, to delete the entire row.
If I have a table (see below), is it possible to create a macro to delete rows that do not have defined data. In the example below, I would want to delete rows 4 through 7 as there is no date in Columns B through D.
A B C D
1 2008 100 200 300
2 2009 500 600 700
3 2010 800 900 1000
4 2010
5 2011
6 2012
7 2013
I have a range that has been formatted as a table. Once I've applied a filter, if I try to select all of the rows, and delete the visible rows the option is greyed out.
Is there no way, short of vba, that I can just simply delete the visible rows?
I need a VBA to delete rows with blank cells within columns F - AZ
Columns A - E contain headers but also need to be deleted if cells in columns F -AZ are blank.
I have a formula that does exactly what I need , it fetches negative stocks from sheet 1 , but the formula places the data exactly on the same row where the negative is , thus there are a lot of in between data not required , Yes I can copy paste special values and remove blank rows , but the macro will do it faster
View 13 Replies View RelatedI have put together a macro that will delete rows (called DeleteUnwantedRows) in a spreadsheet that contain the phrases "no further action" and "not applicable" ... However the macro does not appear to be working.
View 2 Replies View RelatedWhat I need is a macro to delete a row or rows for a specific range of cells (eg. E20 to E58) when the cells in that range column E is = blank. The cells in column E is formated with a currency sign $. Deleting the row should shift up all rows below. I need to run this macro manually. Excel 2002 SP3.
View 9 Replies View RelatedI have attached a worksheet to illustrate a "Before" (raw data) and "After" (desired results).
Each row contains data on a forex trade. The variables which must be assessed in each row are:
Currency Pair (e.g. GBP/USD).
Opening Time
Closing Time
What I need to do is delete many rows in the raw data because they reflect a condition I do not want in my analysis, which is having multiple open trades of a single currency pair during the same time period.
To perform my analysis I need to delete all trades (rows) which meet the above condition.
The worksheet provides examples, along with a rudimentary tool I've used to help me sort/delete rows manually.
Since I am looking at thousands of trades, a manual sort/delete is impractical. (my eyes don't like this kind of work!)
The rudimentary tool I've used in manual sorts/deletes is simply to have a column which returns a "1" if a trade opens before an older trade has closed. I do this by first sorting the data by (a) currency pair then (b) date opened. Then I must manually go through multiple iterations of deleting trades until there all of the "1's" have disappeared.
I'm hoping someone can show me a macro which might do this sorting/testing/deleting automatically, at least to the point where all I have to do is repeatedly press a "macro" button until there are no "1's"
I have a daily worksheet that will always have 9 columns. The end of the data contains some rows that contain all zeros. The number of rows will vary from day to day. Is there a way to specify that "if the cells in columns A:I contain a zero, delete the entire row"?
View 4 Replies View RelatedIn the sample below I need a macro that will delete the entire rows
where the data is repeated in a given column---that is, that it would delete
the repeat ones, leaving one of them. In this example, in the first set, all
that should be left are two rows which contain ME22N and MR8M in column E.
ME22N is repeated two more times and those rows need to be deleted.
If I could get a macro that would ask for the column to operate in, that would be
great for other spreadsheets where it would not necessarily be column E.
ABC DE
MACLEOLLynn MacLeodP0040104ME22N
MACLEOLLynn MacLeodP0040104ME22N
MACLEOLLynn MacLeodP0040104ME22N
MACLEOLLynn MacLeodP0040104MR8M
MACLEOLLynn MacLeodP0050006MB0A
MACLEOLLynn MacLeodP0050006MB0A
MACLEOLLynn MacLeodP0050006MB0A
MACLEOLLynn MacLeodP0050006ME21N
MACLEOLLynn MacLeodP0050006ME21N
MACLEOLLynn MacLeodP0050006ME21N.............
I need a macro to delete rows that contain specific data in column A. For example, in the attached spreadsheet below,I need the macro to look for data in rows A1 - A7 (highlighted in yellow) and then delete the rows. The same data occurrs several times in the spreadsheet. The macro will need to delete all rows where this data occurs in column A.
Microsoft Excel - Book2___Running: xl2002 XP :
OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutD9=
ABCDEFGHI1
[Code] .......
