I want to delete all the rows with values between -1 and 1 in column 'I'. I currently set up a macro to do the formatting and conditional stuff that highlights all values above 1 and below -1 - these are the values I need to conduct my analysis on, but I can't figure out how to delete the rows in between. The worksheet has approximately 5,000 rows (and growing) and this would help me clean up the data significantly.
View 7 RepliesI need some assistance with a simple macro. Im clueless when it comes to macros.
Heres what I have:
column "e" contains the year built for homes. Some of the fields contain "9999" or "0000" or blank. I need to delete these entire rows. If the year is between 1900 and 2020 I would consider it valid and keep the row.
So I need a macro that says something like this:
if column "e" is not between 1900 and 2020 delete the entire row.
I have the following issue. I have a file, which contains about 7 000 columns, each with 8000 rows, mostly filled with numbers (with decimals). But sometimes, numbers will be replaced by "N/A" where a value was not available. What I want to do, is delete columns, where all the rows are just "N/A" to reduce the size my file.
View 2 Replies View RelatedThe attached picture shows part of an excel file. It contains about 50.000 rows which I want to run a pivot on. The problem is though that the file contains some rows which stop my pivot from running correctly. These data which I mention are in rows 4, 7, 22-25. Seeing as deleting them manually would take me hours and hours I was wondering if there would be a macro which I can run which delete rows automatically. I think it should filter on the following: whenever there is not a numeric value in column A, the entire row should be deleted.
View 6 Replies View RelatedI am trying out with a code which checks for cell value as "Select" in column IU and then checks for corresponding column IV for value as "0". Please note that "Select" and "0" are populated by formulas. I need the select "Select" and "0" till the next "Select" occurs in column IU and delete the selected range and continue the process until last non empty cell based on column C.
I have written the below code but it doesn't work.
Code:
Public Sub Test()
Dim nRow As Long
Dim nStart As Long
[Code]....
I could have uploaded the excel file that I am working on but did not find any upload attachment option.
I am trying to create a macro that determines if a range I am selecting has any non-numeric fields. If it finds say an cell beginning with a letter a message box appears letting the user know and possibly give the cell and value it found.
View 7 Replies View RelatedI have around thirty columns I manually search using AutoFilter to find values outside certain ranges. The ranges are different for every column and I copy/paste the out of range values onto another sheet. I am wanting a marco to do this for me.
Here is what I have worked up so far. I thought Select Case would be the easiest to adapt for each column by just changing the values.
Sub ColumnCase()
Sheets("10AL3-27").Select
Range("K1").Select
Selection.Copy
Sheets.Add After:=Sheets(Sheets.Count)
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.Paste
Column K is the first of the columns I sort. The code above seems to be trying to paste the entire column rather than only the cells with values outside the range.
What would be the best way to select the cells which are out of the particular range?
I am trying to figure out a formula that will allow me to compare the
contents of cells within a range and let me know if there is a value that is
not the same as the others. For example:
Columns a,b,c,d,e and f and say "Joe"- this result is acceptable
Columns a,b & c all say "joe" and d,e,&f all say "Mary"- this result is
unacceptable
I want a formula or function that will tell me this wihout me having to
visually scan the data to determine this.
how to convert number into text (acutal formating)
Eg. : 150500
One Lac Fifty Thousand Five Hundred
I am finding many posting on this topic with unique numeric values and have not come across one in regards to a text value. The essence of the formula is looking through a list for unique email addresses and now I need to up it to a date range and eventually a store # range
I am using the following array formula to establish an overall count:
=SUM(IF(FREQUENCY(IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""), IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""))>0,1))
Ctrl+Shift+Enter
The date column is E:E.
The store number column is G:G
I'm looking for a way to count the cells in a specified range if the cell contains a timevalue (such as: 0:05 or 1:15). When a cell in the same range contains a normal value (such as: 1 or 20) it should not be counted.
What formula should i use for this?
I was experimenting with:
=CountIF(N4:N50,">TIMEVALUE(0:01)")
and
=CountIF(N4:N50,">TIME(0,0,1)")
But both don't seem to work.
I am copying a price list from a worksheet. I currently have a script that deletes unwanted rows (products) but these products' header rows' are left. I also want to delete these text based headers. One solution might be a script that reads a columns cell value in the row(s) below and if values are missing the header row should be deleted.
View 2 Replies View RelatedDelete columns with no values in them:
Code:
Sub DeleteAllBlankColumns()
Dim LastRow As Long
LastRow = Cells.Find(What:="*", SearchOrder:=xlRows, SearchDirection:=xlPrevious, LookIn:=xlFormulas).Row
On Error Resume Next
[Code] .........
I want it to ALSO delete entire rows in the worksheet that do not have any values across the entire row. Currently the worksheet prints rows that have borders but no values. This would eliminate that problem.
But if there is a value in any cell of the entire row it keeps that row.
I have a long list of IP addresses in an excel column, they all either end with .1 or .3, i want to be able to get rid of any ip address in the list that ends with .1 but when i select the column and choose filter by ends with and put the value (i have tried .1, 1 *1 ".1" and "1") and all it does is remove every value, the column looks like this
10.10.5.1
10.10.5.3
10.10.6.1
10.10.7.1
10.10.7.3
10.10.8.1
10.10.8.3
10.10.9.1
10.10.10.1
10.10.10.3
10.10.11.1
10.10.12.3
and i want to remove all cells that have an IP address that ends in .1 so that it would look like this:
10.10.5.3
10.10.7.3
10.10.8.3
10.10.10.3
10.10.12.3
i figured the ends with filter would work but i dont know why its not doing what i expected it to, there are several thousand cells and it will be impossible to delete them one by one, how i can just get rid of any cell that ends with .1
I have a spreadsheet with three colums of data. The first column contains
records which have occasional phone number duplication- see blelow:
(555) 000-0000DataA1ValueA1
(555) 000-0000DataA2ValueA2
(555) 555-9770DataA3ValueA3
(555) 555-4464DataA4ValueA4
(555) 555-4464DataA5ValueA5
(555) 555-4720DataA6ValueA6
(555) 555-8823DataA7ValueA7
(555) 555-3834DataA8ValueA8
(555) 555-4125DataA9ValueA9
What I need to do is (somehwhat) automate the process of filtering or
deleting out all rows which have duplicate data in the first column, but not
second or third columns. I'm sure it's been done...I tried the Excel
out-of-the-box.
Within one column, there are cells with values A, B, and C for example. I want a loop that
- delete all rows from the first row to the row where A occurs,
- delete all rows BETWEEN where B and A occurs.
- and then finally, delete the single rows where C occurs.
This might seem I'm just deleting everything but obviously there are more "A" and "B"s in the column.
1
2
3 A
4
5 B
6
7 A
8 B
9 C
10
So in this example, rows 1 to 3 are deleted since I want to delete row 1 to the row where A is; rows 5 to 7 are gone (B to A); then finally row 8 is gone since C is there. Whether it's A/B inclusive doesn't matter..I just would like to see the (simple) logic.
Macro to delete a row if it contains a particular value in a column. Say for example I have the following:
a b c d
1 x
2 x
3
4 x
I want to be able to put into my macro code that says delete all rows that contain an X in column B. So this would leave just Row 3 remaining.
I could also sort this data so that I get:
a b c d
1 x
2 x
3 x
4
That way I just have to delete all the rows less than and equal to 3. Ultimately I'm trying to get a way for the macro to copy the rows that DONT have a value in a particular column. But I figured it might be easier to find a macro which would delete.
I have a 20,000 row text file that I import. It has blank rows, page headers and footers, and many rows at the bottom that I do not want. I have been cleaning up the data manually but this takes a great deal of time and I have a need to perform this clean up on a more frequent basis.
I have tried recording a macro to do some of the deleting but I am running into an issue that I do not know how to over come. When I filtered the data based on "Blanks" on a specific column and then try to delete them in mass, Excel errors out stating that my request was too complex.
I have rows between the Words "vendor" and "sales order" both words are in column A. The number of rows is never constant but needs to loop through the whole document. Is there a way to make a macro to do this?
View 9 Replies View RelatedIs there a VBA code I can use that will delete all rows that contain "ABC" or "YXZ" or "HHH" in column A ?
View 2 Replies View RelatedI need a macro to delete a specific range of rows. For example below:
UK
Manchester
London
Chelsea
Birmingham
[Code]....
Each line represents a row. If a cell matches "JAPAN" then the macro needs to delete all the rows relating to it (in this case all the cities that are based in Japan). So after running the macro my list will have:
UK
Manchester
London
Chelsea
Birmingham
[Code]....
Need a Macro to delete all rows containing values less than or equal 300 in column A
View 5 Replies View RelatedEach day I am going to have a list of about 300 different ID numbers, which i have already got a macro for creating, that outputs them into a single column on a sheet.
The next challenge Ill face now, is that I'll have a list of maybe 500 ID numbers in another spreadsheet.... I need a way to basically tell excel to keep rows that contain the numbers in 1 column on the list of 500, that correspond with those on the list of 300.
Numbers that are not found on the list of 300 ID numbers, must be deleted, along with the entire row.
I essentially need a macro that runs something like this that i found online, but instead of it just looking for the word "apple" as rows to delete, i would need it to check to see if the number is one of the 300 on my list.... and delete the row if it is not on the list
PHP Code:
Sub Delete_Rows()Dim rng As Range, cell As Range, del As RangeSet rng = Intersect(Range("A1:C20"),
ActiveSheet.UsedRange)For Each cell In rngIf (cell.Value) = "Apple" _ThenIf del Is Nothing ThenSet del = cell
Else: Set del = Union(del, cell)End IfEnd IfNext cellOn Error Resume Nextdel.EntireRow.DeleteEnd Sub
How to create a macro to search a value and delete the row but I'm having trouble trying to get this to search multiple values. Keep in mind I'm really new at attempting to create a macro so this may look terrible ;-)
I have a list of 20 numbers (changes from time to time) and I need to filter any row containing any one of these numbers out of my results each day. I am currently able to filter a single group of numbers but get an end error every time I attempt to string a group of numbers.
This is what I have so far and is an example. We'll use three numbers as an example.
"12345","12346","12347" are the numbers that we'll use for the example that I need to filter. The code that I have is:
I've got two workbooks, Workbook1 with a list in column a and Workbook2 with a list in column F. I want to compare the cells in these columns and delete the entire row in Workbook2 if there is a match.
View 3 Replies View RelatedHi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
I've got a code that generates some worksheets in a fairly large workbook. The code is run monthly and replaces the already existing worksheets.
The problem is that each newly generated worksheets contains more than 1 million rows, which means that the size of each worksheet is around 5MB.
I need a code which allows me to delete all blank rows starting with row 1000 in those worksheets.
I have a named range and I want to delete the rows which have zero value in the named range.
View 6 Replies View RelatedI have a large workseet that I want to Delete all rows where value in column Q is > 9.99 and < 60.00. So the only rows left would be where column Q value is < 9.99 and > 59.99. (deleting out the middle amounts) I think this might be a nested If stmt but have not figured it out so I'm not sure if there is another way.
View 4 Replies View RelatedI am trying to delete all the empty rows in a range. What I currently have deletes the rows but skips over a lot as the code runs. Below is what I currently have.
Code:
'msgbox delete blanks???
If MsgBox("Are you sure you want to delete ALL the blank rows in the chart?", vbYesNo, "Delete Blanks?") = vbNo Then
Exit Sub
[Code].....