Macro To Work On 1 Sheet Not All Sheets In Workbook
May 24, 2006
Well this excel workbook has lots of sheets each for a specific region eg, Europe, austin etc and also sheets which have relevant data that gets used in the formula.
Now, say for eg lets considered the sheet called austin.
it does the calculations on the headcount needed for call center.
so the columns refer to a formula called gets() which then calls the erlanc function.
Now the problem here is this gets() function takes a value called calc
and this calc just a cell in one of the sheets called table. Now if I change the headcount value in the austin sheet nothing happens. Then I need to change the value of calc cell say make it to 5 or 6 and hit enter. It starts calulating the values to forecast thye headcount, but it does so for all the sheets . so it is taking a lot of time.
how to get make it run only for one sheet.
View 9 Replies
ADVERTISEMENT
Nov 23, 2009
I have a macro code which gets the file list from a folder i specify and puts it in to an excel sheet as a column. I have then made a drop down list from this so the user can select the file they want.
From this file i wish to copy the data on a sheet that i specify. For example the sheet "dump" from file FR7_19.11.2009.xls (which will be a closed workbook) and paste its content in to the sheet "dump" in Summary.xls
I have a macro which opens up the closed workbook FR7_19.11.2009.xls and copies the sheet "dump" and then creates a new sheet of the same name and content in my current workbook (Summary.xls). However when i wish to select a different file to load in to Summary.xls "dump" the formulas i have been calculating information from this sheet all come up with #!Ref errors. I know this is because the macro i use deletes the old dump sheet before re adding a new one containing new data.
I am therefore looking for a macro which will simply just copy and paste the data from any file i select in to a sheet named "dump" as the data is always set out the same in every file but the values are different. I assume this will then mean that any formulas i use relating to this "dump" sheet in Summary.xls will work because the sheet is no longer being deleted and re-added the data within it has just simply been copied over.
View 2 Replies
View Related
May 12, 2011
I have 20 excel files each having more that 1000 records, the format and header for all the files are same.
I need to consolidate all these 20 different files into one excel sheet, having only one header row at the top. Since I need to perform this step frequently, I am planning to automate it.
View 9 Replies
View Related
Mar 10, 2014
computer just doesn't have the horsepower to run all of the sheets and the formulas and put them together on one sheet in the same workbook.
I was wondering if it would be possible to take the identically arranged sheets from one book and paste the VALUES over to One page in another book.
I'm guessing you'd need to know the directory of the workbook and the title?
Below is the macro i run to compile in to one page in same workbook: (Summary3 is an arbitrary name for the new page, HEADERS is the name of the page that holds the headers for all of the categories, 2014 URL, RAP and DB_Template are the three sheets that I don't want to copy in to this new page)
The headers are in each sheet from B2:DL2 and the data would be from B3:DL75.
I am looking for an update to the following macro that would paste all of the VALUES from each of these sheets in to a new workbook on a single page.
Sub CopyAll()
Dim ws As Worksheet
Sheets.Add.Name = "Summary3"
Sheets("Summary3").rows(1).value = Sheets("Headers").rows(1).value
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If ws.Name <> "2014 URL" And ws.Name <> "RAP" And ws.Name <> "DB_Template" And ws.Name <> "Summary" Then
Range("B2:DL75").Copy Sheets("Summary3").Range("B" & Rows.count).End(3)(2)
End If
Next ws
End Sub
View 2 Replies
View Related
Feb 3, 2010
I want to create a macro that will allow me to copy a specific area or dataset of one sheet to all of the other sheets within a workbook. For example, on my first sheet, i want to copy A1:C3. I want that information to show up on all the other sheets in A1:C3.
View 2 Replies
View Related
Apr 21, 2009
I am using Excel 2003.
I tried to change the number of new sheets in a new workbook, e.g. from 3 to 1.
But the option has no effect on new workbooks. They still show 3 sheets.
View 9 Replies
View Related
Sep 30, 2009
Creating a macro to compare 2 sheets in a workbook and print the differences to a 3rd sheet.
Each sheet will have the same number of fields, 5 columns with the header in the first row.
All values in the cells are integer except for the last field which will be a character.
The key is the value in the 2nd column. If it's not in the other sheet, then it's a new record. If it's a new record then highlight it a color depending on what sheet contains the new record. Now if the key is the same in both sheets, then check the other columns to see what's different. If there is a difference, print the record for both sheets in the third sheet and highlight the differences. I attached a sample of what I want.
View 14 Replies
View Related
Feb 28, 2009
In sheet one I have data as follows ...
View 7 Replies
View Related
Jul 16, 2014
Problem- I need a combobox on sheet1 to reference a column in sheet2 and return only a distinct list.
[Code].....
If I put my sheet2 column info on sheet1, and then reference it appropriately as built in the code above, it code works great. So I know it's close. I cannot change it to work with 2 sheets though. I've tried to "set wsSheet2 = wbBook.Worksheets("Sheet2")" and call it 'where I think it's appropriate', which is the problem. I don't know what's appropriate.
changing the steps in the code above, where in my case the combobox is on sheet1, and the range/data referenced is on sheet2?
This is what I've changed the original VBA to, and when I run the debug, it picks up the last "with...combobox1" statement as the error (error 1004, app/object defined error):
[Code] ......
View 1 Replies
View Related
Mar 14, 2008
I have the below macro in a workbook that I need to combine the two sheets into one, (sheet1 and sheet2). Both sheets in use column "A" for id, but for some reason it is only copying over sheet one? One sheet has 12 columns and the other has 13, not sure if that is making the difference?
View 13 Replies
View Related
Dec 20, 2006
How do I apply 1 Macro to all the sheets in a Work book. That is one Macro should execute the function in all the worksheets of the Workbook.
View 9 Replies
View Related
Aug 21, 2009
OR can I? I get a "Run Time Error '1004' Select Method of Worksheet Class Failed"
Is there anyway around this?
Basically all the sheets are hidden from the user except for the Entry sheet. They input there data on there and then they press a send command button which then needs to copy that information to a hidden sheet. This is where the problem occurs.. Thought maybe their was a way around that or do I need to unhide the sheets during the macro and then rehide them again?
View 13 Replies
View Related
Nov 22, 2009
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies
View Related
May 29, 2007
I'm trying to get a Workbook.Open macro to work. I"m using the exact name for the location. For example:
Workbooks.Open ("O:AdministrationPM Weekly's2007PMWeeklyWE")
My other locations are working fine. For example I am using:
Workbooks.Open ("O:AdministrationDCS Week EndingStats"
View 9 Replies
View Related
Sep 24, 2009
I have the below macro that works well
Sub Button68_Click() 'Creates delivery note
Dim stIDSelect As String
Dim stC As String
Dim C As Range
stIDSelect = InputBox("Enter RMA number you want to create a delivery note for")
If stIDSelect = vbNullString Then Exit Sub
Dim idRow As Range
Set idRow = Intersect(Range("A:A"), ActiveSheet.UsedRange).Find(stIDSelect)
If Not idRow Is Nothing Then
Dim i As Integer................
View 9 Replies
View Related
Jun 5, 2014
I cannot run a macro because I am encountering error 1004, intersect of object. i am using a protected workbook, and I dont have the password to unprotect it, but it needs to be fill out using a macro from a different workbook. Is there a way around this?
View 1 Replies
View Related
Aug 30, 2006
I am encountering a specific scenerio where In I am creating a New file by copying one of the sheets And renaming that With todays date. here starts me problem when I try To share the sheet To work around I am seeing that th macro Is Not copying the sheet properly even though i have given PasteSpecial. The code goes here
VB: AutoLinked keywords will cause extra spaces before keywords. Extra spacing Is Not transferred when copy/pasting, but Is If the keyword uses "quotes".
Sub Newsheet()
sheetname = Format(Now, "dd-mmm-yyyy")
MsgBox sheetname
sheet_count = Worksheets.Count
'Checking for Replication................
View 9 Replies
View Related
Dec 29, 2009
I have a range of cells in a work sheet "sheet 1 " my objective is to filter this range according to certain criteria (i ve succeeded to do this ) yet what i want to do now is copy this data to another existing worksheet in a certain range .
note :the existing worksheet to which i 'll copy the filtered data has some cells out of the range that i dont want to over write ..
Simply :how to copy a selected range of cells in a work sheet to already existing work sheet in a specific range aswell .
View 9 Replies
View Related
Jun 24, 2014
I have the following Macro:
Code:
Private Sub Worksheet_Change(ByVal Target As Range) ' Code goes in the Worksheet specific module
Dim rng As Range
' Set Target Range, i.e. Range("A1, B2, C3"), or Range("A1:B3")
Set rng = Target.Parent.Range("C13:D25")
' Only look at single cell changes
If Target.Count > 1 Then Exit Sub
' Only look at that range
If Intersect(Target, rng) Is Nothing Then Exit Sub
[code]....
Which does not allow entry to range C13:D25 if D12 is empty. Works great!But I need it to work across ranges E13:F25 if F12 is empty, G13:H25 if G12 is empty etc.
I tried copy pasting the same macro over and over again but renaming it to e.g. Worksheet_Change2 causes the Macro to stop working completely.What am I doing wrong?
View 5 Replies
View Related
Jul 9, 2009
We have a sheet which we use to cost products. To ensure that people don't enter prices incorrectly, I have created a lookup to another sheet which shows current prices. Therefore, I have a macro that if I click a button, it looks up the prices from the relevant document. The way I have written the macro is to clear the sheet of what is already there and then to open up, vlookup and then close the lookup sheet.
The problem I had with this was that if i renamed the sheet, the macro wouldn't work - I sussed that one out by changing filename in the macro to 'ThisWorkbook'.
The problem I now have, is that the boss would like the sheet to magically do the following;
Lookup the prices on two external sheets. IF the main sheet doesn't have the corresponding reference THEN automatically go and Lookup on the other sheet for it.
He doesn't want any references to filenames so that, as long as the sheets are stored in the same place, they can be copied/renamed and moved anywhere.
View 9 Replies
View Related
Sep 19, 2006
I have used a small macro to format the sheet to hide cells with no entries and then print. The problem is that when the sheet is protected, then macro wont work. The sheet needs to be protected by the end user. I am only really learning excel, I could add to the following so the sheet can remain protected?
Intersect(ActiveSheet.UsedRange, Range("O:O")).Offset(0, 1).Select
Range("O39:O155").Select
Selection.EntireRow.Hidden = True
Columns("O:O").Select
Range("O21").Activate
Selection.EntireColumn.Hidden = True
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Cells.Select
Range("A21").Activate
Selection.EntireRow.Hidden = False
Columns("N:P").Select
Range("N21").Activate
Selection.EntireColumn.Hidden = False
End Sub
View 4 Replies
View Related
Mar 31, 2009
I have a spreadsheet which has all the names of trips from a warehouse, the day that they operate (1,2,3 etc) and the job line allocated to each trip. It looks something like that:
A B C
DAYTRIPCUST
I would like to create a macro that will be creating 7 new workbooks and then in those workbooks as many sheets as the trips. In these sheets, the customers should be displayed.
How do I write it? I could not find how to have a "dynamic choice" in the macro. I.e. not to have the criteria as "1", "trips1" but to choose from the range of inputs that are available.
View 9 Replies
View Related
Aug 17, 2006
When you enable macros the sheets 2, 3, 4 ect are visible but if you disable macros, you only see sheet 1 and and you can place a message on the sheet saying this will only work with macros enabled.
View 2 Replies
View Related
Apr 9, 2009
I am trying to mark the numbers in column C of Workbook1-Sheet1 that are found in either:
1) Column H of Workbook2-Data1 and having Column C <> “Cancelled” and the date in Column R fall in Q1 of 2009
OR
2) Column C of Workbook2-Data2 and having Column G <> “Cancelled” and the date in Column M fall in Q1 of 2009
There should be only two matches. I can't figure out why my formula is not working.
View 3 Replies
View Related
Apr 13, 2012
I'm trying to find the simplest way (macro I guess) to copy a row into a corresponding workbook. This is for a registration workbook.
This workbook has a demograhics sheet (the main sheet), which will have the persons name, dob, and a few other identifiers. It will also have a column for a registration person to enter the of the 4-5 workshops/classes that a student can be enrolled in. For the sake of argument these will be numeric, comma seperated values 1,2, 3 etc.
I'll then have many sheets (one for each class) that are named 1-Employee Morale, 2-Interoffice Relationships, etc.
Is there an easy way that upon entering a new row in the demographics sheet, the persons name can be copied to the class list? Esentially I'm trying to have one master list of all students and the classes they are signe dup for, and then a printable list for each class that can be given to the instructor.
I know you could probably do a macro, run it once, and do it after everyone is registered, but we would prefer that the data populate based on a trigger or something as each row is entered. The sheets for each class could be named numeric so if you entered 1,2,3 as the classes then the sheets 1,2,3 (names) would be populated.
View 1 Replies
View Related
Apr 4, 2009
I have a workwook with multiple sheets. One of the sheet name is "ABC".
I have a macro which does a particular task. I want that when the macro is run, it should run on all the sheets of the workbook except sheet "ABC".
Here is whar I have tried:
Sheets("ABC").Activate
For Each ws In ActiveWorkbook.Worksheets
If ws.Name ActiveSheet.Name Then
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
End If
View 9 Replies
View Related
Feb 1, 2007
I'm currently writing a macro to check for changes between versions of a spreadsheet. I'm having a problem looping through the sheets and selecting equivalent (named the same)sheets in both sheets. My attempt at code (stripped down a little) is here.
Option Explicit
Sub Difference_Checker()
Dim Check As Boolean
Dim Row As Integer
Dim Column As Integer
Dim ColRef As String
Dim MaxLength As Integer
Dim MaxWidth As Integer
Dim i As Integer
Dim j As Long
Dim Shtname As String
Dim StartTime As Variant
MaxLength = 100
MaxWidth = 256
'Set Application Settings
Application. ScreenUpdating = False
Application.EnableEvents = False
Application.Calculation = xlCalculationManual....................
View 4 Replies
View Related
Jan 2, 2009
I am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
View 2 Replies
View Related
Jul 11, 2007
I have a workbook with 61 sheets in it.
What I need to do is insert two rows at the top of each sheet. Now I know I can manually do it, or write a macro to, that bit's easy.
However, when I insert the rows, a lot of my formulas try to pick out the wrong range.
So for example, lets say we're looking at sheet 1. When I insert 2 rows at the top this style of formula still works...
=B14/B12 (it automatically becomes =B16/B14)
=SUM(B10:B11), =B12+B14, =B12*0.25, these also update automatically.
Even a reference to ='Sheet 2'!B48*2 still updates automatically. But formula's of this kind do not...
=SUM(Sheet4:Sheet10!B5)
(regardless of inserting 2 rows, this formula does not change to =SUM(Sheet4:Sheet10!B7) )
View 3 Replies
View Related
Apr 20, 2012
Haven't done any VBA in a long time so I'm very rusty. I need to copy cells A2 - G2 from sheets 2 - 30 in a workbook to create rows Sheet 1, which will start out blank. This is the final part of longer process. Sheet 1 is used as a summary page.
View 2 Replies
View Related
