Change Sheets In New Workbook Does Not Work
Apr 21, 2009I am using Excel 2003.
I tried to change the number of new sheets in a new workbook, e.g. from 3 to 1.
But the option has no effect on new workbooks. They still show 3 sheets.
ADVERTISEMENT
Change Private Sub Need To Work In All Workbook
Oct 11, 2013I want this private sub macro to change work in all workbook. How it possible?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Cells.Interior.ColorIndex = xlNone
With Target.EntireRow.Interior
.ColorIndex = 37
.Pattern = xlGray25
.PatternColorIndex = 24
End With
End Sub
Macro To Work On 1 Sheet Not All Sheets In Workbook
May 24, 2006Well this excel workbook has lots of sheets each for a specific region eg, Europe, austin etc and also sheets which have relevant data that gets used in the formula.
Now, say for eg lets considered the sheet called austin.
it does the calculations on the headcount needed for call center.
so the columns refer to a formula called gets() which then calls the erlanc function.
Now the problem here is this gets() function takes a value called calc
and this calc just a cell in one of the sheets called table. Now if I change the headcount value in the austin sheet nothing happens. Then I need to change the value of calc cell say make it to 5 or 6 and hit enter. It starts calulating the values to forecast thye headcount, but it does so for all the sheets . so it is taking a lot of time.
how to get make it run only for one sheet.
Hyperlink To Other Sheets Within Workbook When Sheets Change Name
Mar 24, 2012I want to create a hyperlink to a sheet named "adsf"
I am currently in a worksheet named: "62b Arcus"
I want the hyperlink to be set by grabbing the name from another cell.
For example, In cell h7, I have the text: adsf
In cell g7, I want to place a formula such as: =HYPERLINK("adsf!")
Except, instead of this, I want: =HYPERLINK("h7!")
In this way, i want it to hyperlink to a sheet name based on the text that is in h7.
But neither of these formulas work. Both say the following: "Cannot Open the Specified File"
After reading up on this I have discovered that I must save the file and include the file name inside the formula.
My file name is: [Maintenance Color Codes of Houses - colour coded2.xlsm] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
This hyperlink actually works. Yet I have a problem. What if I rename the file. For this reason, I want it to grab the current file name using "filename". I have tried this by the following:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
This grabs the current file name "Excluding the text outside of the [ and ]. I was able to create this formula myself.
How come I can't replace the part with [ and ] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
with:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
These two formulas together would be:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))adsf!A1","LINK")
I also want to replace the "adsf" part with a cell number such as h7. So that it says h7!A1","LINK") or in full:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))h7!A1","LINK")
This doesn't work either
I know that I have probably created a ridiculous formula for what I am after. I'm almost there but not quite. You may know something far, far more simple.
Renaming Sheets (newly Opened Workbook And Change It's Name)
Feb 12, 2008I'm experimenting a bit with this code. The idea is the following:
I've got one spreadsheet (ThisWorkbook) were I define 5 names for 5 worksheets in all files of a specific folder (c: emp). I get stuck at this line: "wb.Sheet2.Name = myval2", since I'm for some reason not able to activate the newly opened workbook and change it's name....
Sub wd_testing()
Dim I As Long
Dim wb As Workbook
Dim firstrow As Long
Dim sht As Worksheet
Dim cell As Object
Dim count As Integer
Dim myval2 As Variant
Dim myval3 As Variant
Dim myval4 As Variant
Dim myval5 As Variant
Dim myval6 As Variant
Application.ScreenUpdating = False
It's important to mention that there is no name conflict and the names work when entered manually.
Work Book About 20 Sheets In It
Mar 19, 2005got work book that has about 20 sheets in it.....there are links throught the workbook. ......one sheet in particular when i go to it, it freezes up...and i get the dreaded "Send Error Report to Microsoft" window"...and we all know what happens next.....excel shuts right down.
I can open the workbook and click on ANY sheet....but when i click on this one particular sheet in the book i get the error message
This work book is a template....its the estimating work book i use at work...and whenever i get a new job to estimate i open up this template.....put in my data and save the workbook as the job title.....so basically i have about 50 of these workbooks......and it doenst matter which one i open.......whenever i go to this one same sheet in any workbook i get the freeze
and the freaky thing about this is it does it randomly....I make save this template (as a new work book) when i get a new job to estimate.....and i never have any problems.......but today for some crazy reason its doing what i mentioned above......it did this about a month ago too.......same exact problem.
when it happened the first time i tried all kinds of stuff, and the only thing that worked was i had to go to windows explore...save all the files to a memory chip.......go to a different pc with my version of windows (XP)....open each file up......re-save it.......go back to my pc...reload it
Macro Combining Work Sheets Into One
Mar 14, 2008I have the below macro in a workbook that I need to combine the two sheets into one, (sheet1 and sheet2). Both sheets in use column "A" for id, but for some reason it is only copying over sheet one? One sheet has 12 columns and the other has 13, not sure if that is making the difference?
Code To Work On Some Sheets Only Across All The Books
Nov 14, 2006I use a code to work on all the sheets across all the files. But now I want the code work only on sheet named Paid across all the files.
Sub PP()
Dim wb As Workbook
Dim ws As Worksheet
Dim varWBnames As Variant
Dim varItem As Variant
varWBnames = Array("Book4.xls", "Book5.xls", "Book6.xls")
For Each varItem In varWBnames
Set wb = Workbooks(varItem)
For Each ws In wb.Worksheets
ws.Activate
ws.Range("A1").Formula = "=A2+A3"
Next ws
Next varItem
End Sub
Apply Macro To All Work Sheets
Dec 20, 2006How do I apply 1 Macro to all the sheets in a Work book. That is one Macro should execute the function in all the worksheets of the Workbook.
View 9 Replies View RelatedTransferring Sheets To New Work Book
Feb 1, 2007i want to do a macro, that will copy and transfer Selected worksheets to a new Workbook? so guessing, you select the sheets, then click the button and it copies then opens new blank workbook and puts them in?
View 9 Replies View RelatedCode Does Not Work When Change Column Value A To D
May 7, 2012I have a macro that runs through a list and stores elements to an array. If the element is not found in my list, it adds to the next available row and adds the value from the array to that cell. Right now, I am searching in column d but am storing the value of column a at that location. When I switch the reference to column D, the value is not inserted into my new list.
Here is my current code:
Code:
Sub Arraytest()
Dim arr As Variant, lastrow As Long, i As Long, f As Long, l As Long, lastrow2 As Long, insertrow As Long
[Code].....
Why does the code not work properly when I switch to D? The value is storing correctly in the array. I test this by the last line of the code and it executes properly.
How To Compare Data From 2 Sheets And Put Into A New Work Sheet
Feb 28, 2009In sheet one I have data as follows ...
View 7 Replies View RelatedEditing Combobox VBA To Work With 2 Sheets Instead Of Same Sheet
Jul 16, 2014Problem- I need a combobox on sheet1 to reference a column in sheet2 and return only a distinct list.
[Code].....
If I put my sheet2 column info on sheet1, and then reference it appropriately as built in the code above, it code works great. So I know it's close. I cannot change it to work with 2 sheets though. I've tried to "set wsSheet2 = wbBook.Worksheets("Sheet2")" and call it 'where I think it's appropriate', which is the problem. I don't know what's appropriate.
changing the steps in the code above, where in my case the combobox is on sheet1, and the range/data referenced is on sheet2?
This is what I've changed the original VBA to, and when I run the debug, it picks up the last "with...combobox1" statement as the error (error 1004, app/object defined error):
[Code] ......
Sorting And Copying Results Into New Work Sheets
Jun 3, 2009I have a work sheet with about 35,000 lines of data. Every day I have to sort the list by product category (I use auto filter to separate) and then copy the results into a new worksheet, there are about 300 product catagories. I'm new to macros but I'm wondering if there is a macro that can automate this process.
View 6 Replies View RelatedHow Can I Make A Macro Work To Hidden Sheets?
Aug 21, 2009OR can I? I get a "Run Time Error '1004' Select Method of Worksheet Class Failed"
Is there anyway around this?
Basically all the sheets are hidden from the user except for the Entry sheet. They input there data on there and then they press a send command button which then needs to copy that information to a hidden sheet. This is where the problem occurs.. Thought maybe their was a way around that or do I need to unhide the sheets during the macro and then rehide them again?
VLookup To Work For Multiple Ranges On Different Sheets
Feb 23, 2012Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Intersect(ActiveCell, Sheet8.Range("C16:Y1000")) Is Nothing Then Exit Sub
Dim rw As Integer
Dim arw As Integer
rw = 16
[Code] .....
As you can see, my code is located in the sheet8 worksheet object. Now, I have a few questions about this. Because I am located in the sheet8 worksheet object does that mean my code can only work in sheet8, i.e., the following won't work because I am in a Sheet8 worksheet object?
Sheet10.Range("B12) = ..... ....... .....
This is not returning a value in Sheet10? My question is how do I make my code return a value in Sheet10?
Change On Events Fails To Work On 1st Use Of A Cell
Jul 27, 2013I have set up a selection change routine which works if the cell has previously been used or if you make an entry and then change it again. I have tried to delete the empty cells 1st and then save the document, when opening the document it I enter a value in a previosly unused cell the change function does not appear to be called. There is an auto open routine that runs as well, there is more code in use but it fails at the start point.
VB:
Sub Auto_Open()
'
' Auto_Open Macro
'
'
Application.EnableEvents = True
[Code] ......
Sheet Change Event Wont Work
Feb 2, 2009I have a Combo Box on a Work Sheet that the user selects a subject from. When the Combo Box content changes I need it to run a macro. Ive tried putting this in the WorkSheet file for the sheet
View 3 Replies View RelatedChange Of Toolbar Item Caption Does Not Work
May 14, 2009I am trying to change the caption of a toolbar item but for some reason it does not work.
Application.CommandBars("Format").Controls("Item...").Caption = "I&tem..."
However,
Application.CommandBars("Format").Controls("Item...").Delete
for example works just fine
SUMIF In Array Formula On Multiple Work Sheets
Jan 3, 2012I am trying to use the SUM IF Array formula to sum a group of numbers that fall under a heading of reference numbers over several sheets of data. For example purposes lets say my spreadsheet looks something like the below.
A
B
C
D
E
1
2600000248391
2600000393805
[code]......
The first two digits of the heading numbers are the criteria I am trying to use to separate and sum the data. For example I need to sum the value of the data below headings that falls between 1400000000000 and 1499999999999.
For the example above I used the below formula for the current Sheet and it works fine.
{=SUM(IF(A1:E1>="1400000000000",IF(A1:E1="1400000000000",IF(Sheet1!A1:E1,Sheet2!A1:E1
How Do I Check Cells In Multiple Work Sheets With SUMIF
Jul 19, 2007How do I get a function to check cells on multiple work sheets.
For example this function searches for the word "hello" in cells, A1 to A50 and then adds up the number in the corresponding cells where "hello" is found from C1 to C50:
=SUMIF($A$1:$A$50,"=hello",$C$1:$C$50)
Two questions:
01) How do I search the same cells in two further work sheet, "Sheet2" & "Sheet3"?
02) Is there a way to search every cell in an entire work sheet?
Code To Return Data From Multiple Work Sheets
Apr 23, 2009I have a folder on a public drive. (\CFDIVIX1PublicPurchasing2009)
This folder contains multiple sub-folders (the sub folders are vendors which I purchase merchandise from) each sub-folder has 1 .xls file in it. Each file has 1 sheet containing all the information I need to retrieve.
Each one of these files has the same header information in cells A1 through I2 so I manually place that when I create this new workbook prior to inserting the macro. Each work sheet has a different # of rows depending on the number of items I buy from that particular vendor but I feel safe saying it never exceeds 250 rows per worksheet.
What I need
For the macro to pull up the first work sheet and pull out the data from cells A3 through I250 and place that data into my new work sheet in the same format. Then I want the code to move on to the next worksheet and pull out the A3 through I250 and place that data in the new worksheet directly below the last row of data that was pulled in. (Also it would be great if the code ignored blank values. Like if the first work sheet it pulled data from only had data in the first 10 rows I don’t want 240 rows of blank rows before the next set of data)
I hope that running this macro will accomplish transferring all of my data from these multiple sheets into a single work sheet containing all of the pricing for all of my vendors. Once I have this I can place a second sheet on the workbook and use a formula to pull out pricing information that I need on a per basis without having to search through 50 vendors to find who it comes from. I don’t control the vendor work sheets that I want to extract data from so I need to use the macro to run it weekly incase my purchasing dept makes changes.
Printing Scattered Ranges In Different Work Sheets By One Click
Apr 9, 2007I have four sheets workbook, and i'd like to set a command button that prints scattered tables ( ranges) on my workbook but still have a pattern.
I attached a simple wokbook that explains how ranges are positioned in my workbook, i hope that it is possible to print these tables in the sequence shown in the file by a single command.
UDF Work In Only One Workbook?
Jul 23, 2013I have some user defined function in an .xlam file that works.
Right now since that .xlam file doesn't auto open. I have a button on specific workbooks that will open that xlam so all the udfs work.
Is there a way to embed the udfs into a specific workbook so that workbook is a standalone without the need for opening a separate xlam file?
Date Change MM/DD/YYYY & 3-Work Day Weekly Repeat
Oct 11, 2009In MS-Excel 2007 dates seem to be limited to YYYY/MM/DD style, which I imagine there is a way to alter it into MM/DD/YYYY. I looked into MS Help, and a google search, and either I was using wrong keywords, or not, but I couldn't find anything to simply change date arrangement. If I am being unclear, I am talking about the function '=DATE(YYYY/MM/DD)' is what I want to change.
After I get that fixed, I need there to be a function to reproduce a 3-day work week (Mon, Tue, and Thur). e.g.:
10/05/09 [data] [data] [data]
10/06/09 [data] [data] [data]
10/08/09 [data] [data] [data]
Week 1 [data sum] [data sum] [data sum]
10/12/09
10/13/09
10/15/09
Week 2
10/19/09
10/20/09
10/22/09
............................
Have To Open Workbook Twice To Work With It
Nov 25, 2012When I first open a workbook most of the functions don't work. for example the vertical scroll bar does not move. When I close the workbook and then reopen it for the second time it works fine.
Happens with any workbook I have.
Custom Format Does Not Work - How To Change Column B2 To Hours And Minutes
Mar 3, 2013The attached file contains data. In Worksheet 1 (and also 2 and 3) column B2 shows day, month, year, hours, minutes and seconds. I was hoping to convert this to just Hours and Minutes, but all the usual methods using Custom Format does not work. This leads me to think that its in TEXT format. How can I change Column B2 to Hours and Minutes?
View 14 Replies View RelatedCombine Three Sheets Into One With Facility To Change Sheets Name?
Jun 2, 2014Create a macro which will combine three different sheets with their names from 10 to 15 sheets.
View 1 Replies View RelatedTrying To Get A Workbook.Open Macro To Work
May 29, 2007I'm trying to get a Workbook.Open macro to work. I"m using the exact name for the location. For example:
Workbooks.Open ("O:AdministrationPM Weekly's2007PMWeeklyWE")
My other locations are working fine. For example I am using:
Workbooks.Open ("O:AdministrationDCS Week EndingStats"
Create Object, Work With Workbook
Oct 12, 2008I'm trying to open a file and perform various tasks. This is the structure:
Dim xlApp As Object
Dim xlWb As Object
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
Set xlWb = xlApp.Workbooks.Open(BackupFile) ' backupfile evaluates to c: esting est.xls
xlWb.Worksheets(1).Activate
Debug.Print xlWb.Worksheets.Count
Dim ws As Worksheet
For Each ws In xlWb.Worksheets
Debug.Print ws.Name
ws.Activate
Next ws
I think I'm totally missing something. The above works, except for the loop. None of the names show up in my immediate window, and none of the worksheets are activated. xlWB evaluates to nothing, which is where the problem has to be...but why would my first .Activate and Debug.Print lines work? Also, If I declare xlWb as Workbook then absolutely nothing works after the file is opened.
Basically what I want to do is open the file, do a bunch of a stuff with it, then save and close it. I have this all working without creating another object, but the opening of the file is still visible to the user. Seems like turning off ScreenUpdating doesn't truly work.