How to make the list of file names through macro.
For example the Folder name is All file in which 60 files are there and I have a excel sheet named File List so I want to update the file names in excel through macro.
I have a Macro which will list file names in column A, but it does not include the sub folders. Edit this macro to include sub folders as well.
I also want to display the file path in the column C for ech document displayed in the column A
HTML Sub ListFiles()
Dim objFSO As FileSystemObject
Dim objFol As Folder
Dim objFiles As Files
Dim objFile As File
Range("A2:A300").Clear
Set objFSO = New Scripting.FileSystemObject
Set objFol = objFSO.GetFolder("c: est")
Set objFiles = objFol.Files
Range("A2").Select
For Each objFile In objFiles
ActiveCell = objFile.Name
ActiveCell.Offset(1, 0).Select
DoEvents..................................
I need to rename some jpg's in the c: emp directory ( about 600 ! )
In Col A starting at A1 I have the following:-
DFCF0156
DFCF0157
DFCF0159
DFCF0161
DFCF0164
etc
In Col B starting at B1 I have the following:-
ID3425
ID5823
ID427
ID7272
ID8875
etc
In c: emp is have:-
DFCF0156.JPG
DFCF0157.JPG
DFCF0159.JPG
DFCF0161.JPG
DFCF0164.JPG
etc
What I want to end with in C:TEMP is:-
ID3425.JPG
ID5823.JPG
ID427.JPG
ID7272.JPG
ID8875.JPG
i have a names list in range P2:P100
like
P2 = A
P3 = B
P4 = C
P5 = D
P6 = E
P7 = F
then create the sheets with name A, B, C, D, E, F
I have a task I would like some assistance with…
I have a work book that I have to copy over 70 times for over 70 work locations. As you can see, this will require different file names for each location.
I would like some have help with a code that I can use. If possialbe I like a code that will make copies of the file renaming each with the names I have on another list. Is this feasible?
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies View Relatedloop and range function to apply in the below code through which I can avoid writing code for all the rows.
I am trying to open excel files located in single folder from files name (along with the path) in single worksheet (Column B and Row 1 to 500).
I have created follwing code which opens the file and then runs a macro in it.
a Sub Test()
Dim strFName As String
strFName = Sheet1.Range("B2").Value
[Code].....
I tried recording a macro to automate some tasks I perform every day between two workbooks. While in one I want to go get data from the other. The problem I'm having is the name of the workbooks I want to run this on changes every time I download my data into Excel. The files always start with the same name but the date gets appended to it. Is there a way to modify the macro to just work with the two books I've got open?
View 3 Replies View RelatedI need to make this macro read FOLDER names instead of FILE names. When I posted this question yesterday to get this macro, I wasn't told that each file in its own folder. I need the folder names now.
_____________________________________
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Ford"
.SearchSubFolders = False
.Filename = "*.*"
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
Cells(i, 1) = .FoundFiles(i)
Next i
Else
Cells(i, 1) = "No files Found"
End If
End With
End Sub
Need code to open a browser to select a folder and list the files in that folder in excel. I do not want to include sub directories.
View 4 Replies View RelatedAny code that will grab the names of all files from all directories on an FTP server? I have the path & credentials to get to them, but I need a process to drop their names into a spreadsheet to compare against a list of files loaded onto a SQL database.
The directory structure on the server is subject to change, as are the number of files in each repository.
I am adding a list of file names to a combobox list and want to filter this by adding only the filenames that have been modified today. I have used the FileDateTime(Fil) but it leaves the combobox empty. I am using the code below. how to add only the files modified today.
View 3 Replies View Relatedi'd like to be able to import a list of file names from a folder. sounds fairly straight forward to me, but example:
folder a has 10 files in it (let's say PDFs - numbered 1 through 10). I'd like to be able to open the spread sheet, and see the file names in column b. ideally, i'd also like subfolders to be listed, in the next column. but, let's start with just this.
I am creating a proposal for a online sales store, i have in column A a list of item names that my buyer liked and wants to run, but i have to send them the pictures for the items which is located in a directory on my drive together with all other items. we have 4 category's of pictures 1 is the main image from this we only have 1 of each item, then we have the S category there we may have up to 3 images s1, s2 and s3 not more then 3 and the same is with the R category and with the M as well. We did created a VBA to copy all images from the list into a new directory with all sub pictures into a new sub dir. and bring back a list of all images not found. But i am having a problem when i run the code if it dosnt find the image looking for (for instanse EAR11-M1 the code stopes there looking for the file even the error checking in the code is set to resume what is wrong with code?
View 3 Replies View RelatedI was wondering if anyone had any code to loop through every file in a folder and list the file name along with every sheet name in that file? I'm using Excel 2007.
View 4 Replies View RelatedHere is what i have:
View 13 Replies View RelatedExcel 2010.I'm using this code to print user's accessing a file:
[Code] .....
However as someone could just delete the printed user log in the Sheet2, and also you can't use this if you protect the sheet, which defeats the purpose.
I want it to print the log into a separate file. Can I add in the file path/name to this code somewhere?
Code to save a file C:DesktopFile.xls to a different path say F:New.xls as a backup.
I want this to happen every 1 hour so that if in case my original sheet File.xls is corrupted or deleted, I have a backup data (New.xls) which was last saved.
And also File.xls need not be necessarily open.
I have a database output file where one of the columns contains managers names, often more than once. I want to apply an autofilter on manager name and then copy the result to another sheet or sheets. My criteria for the autofilter is a variable pointing to a list of names that at present I maintain by hand; a for-each-next loop then cycles through the names.
What I would like to do, before running the autofilter code, is to create the list of names via code. This would then automatically pickup names that are missing.
The code I have so far is below:
Public Sub find_managers()
Dim managers1 As Range
Dim names1 As Range
Dim n1 As Variant
Dim n2 As Variant
In my mind it should check the names in the unique list against the imported list and add any missing names.
how to save multiple file with other names in the same folder
View 1 Replies View Relatedi'm looking for a macro which within a sheet named "foldernamedump" will list in a column the folder names within a directory I specify. I have seen a couple of sample codes but I just cant seem to get them working at all so I think its best to start from scratch and the work i get supplied here is always perfect. I also want the macro to clear the contents of the sheet before it loads again just to ensure there is no old data within the sheet.
View 5 Replies View RelatedI am desperately in need of a macro that will count the number of items in column A of each worksheet and then summarize the results next to the names of the worksheets (i.e. in two adjacent columns) on Sheet 1 of the book. Obviously, Sheet 1 needs to be ignored by the macro.
View 3 Replies View RelatedI have a template file for ordering trafolyte and steel plates. I have added macros to this template file. The existing macros do the following (shortly described):
Macro 1: clears order
Macro 2: update order date + send a read only file to the supplier of plates + save a read only copy of the file into one of three folders acc to info in one of the cells.
It's the Macro 2 I want to edit.
I want to add a "function" which copy a selection of data.column A to N from row 12 to 548 but only the rows where there is a value in column A.
Row 1 to 11 includes standard order info and Macro buttons.
Row 11 includes the heading for order data.
For everytime someone click on the Macro 2 button in the template file, I want the selection to be paste into the first "available" row in a "Total list" file.
The "Total list" file may have to be open (or a function to open, paste selection and then close the "Total list" file may be added)
File and Folder info:
To simplify suggestions, the following file and path info can be used (I can change to the correct later):
Template file name: template_order.xlsm
Template file location: \servershared emplate
Total list file name: total_list.xlsx
Total list file location: \servershared otal
Selection info:
The template file exists of a "general order info area" A1:N10
The column heading for order data is located at A11:N11
The selection to be copied is A12:N550 - But only rows where column A includes data (not empty).
(If the spesific order consists of 14 plates than there will be item no 1-14 in column A and I then I want to copy A12:N25 (row 25 will be item 14).
When I try to use record macro it looks like it only records what's happening in the template file - It doesn't record the pasting in the total list.
I have a workbook that contains worksheets. They are listed as follows:
Sheet 1ABCDEFG
In cells A1 - A49 I have text. What I would like to do is to have a macro that I can run that will basically copy and save new workbooks with sheets A - G copied over and have the new workbook saved with the file name that I have denoted in cells A1 - A49 on Sheet 1. Also, the macro would ask me where I want to save the new Workbooks.
For example, if this were Sheet 1, Column A then the cells below would be the saved name of the new workbooks and the new workbooks would have Sheets A - G in themRed
Blue
Purple
Black
White
Yellow
Orange
Green
Gray
Brown
One more piece of information, the file that is being copied and saved is large (~80MB). If there is a macro that would allow me to simply "save as' the workbook and the Saved Workbooks would be named using the data in Sheet 1, that would work as well in case copying, pasting, then saving may take more time
I need to compare two lists of client names. One list has 59k names to be compared to second list of 1000 names.
The list of 59k are listed in column D and the other list is in Column E. I tried conditional formatting but unfortunately some of the names are slightly different I.e. fair point communications vs fair point communications inc. I was trying to put in v lookup with a trim function but it didn't seem to be working.
I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.
View 9 Replies View RelatedCan I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedIs it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.