I have a table I use visually, and I put it in a spreadsheet. Instead of finding a table value based on row and column label decisions, I use it as follows. I decide the row by matching exactly the height, h = 8 ft. In that row, I match the next larger value of 10 kips, in this case the value is 12.72; I then pick the column header label, in this case the value is 4 x 8.
I don't know how to make"B8:L8" equivalent to "B"&3+row : "L"&3+row in the 2nd Match formula?
This had been hunting me for weeks and I still could not come over it after weeks of study the conditional formating IF, match, index, Vlookup, etc to find several duplicated value, e.g Column B = Name 1 & Row B = Time and so on, where as Name will have data of Name 1 duplicated in different time, while row B, "Time"would change to a different Name and maybe it would go back to Name one.
My problem was dont know which formula I can use in a different sheet to bring back the data to Name 1 did Task A at Time A, while Name 1 did Task B at Time K, etc. If this is not Name 1, then Name B replace above.
I am having many difficulties getting conditional formatting using the match function to work correctly in my excel document.
What I would like to accomplish is as follows in the 3Q09 tab. If a subdivision name is found in C-62 through C-70 and a match is found for the subdivision name in AB-24 to AB-66 I would like it so the AB-24 to AB-66 Subdivision name is bolded for every match. I removed the function formulas from the 3q09 tab I used to have since they didnt work and I do not want to confuse anyone.
This is correctly done on the "Working Correctly" Tab included in the same file, so please view this for clarification if you need it. Why it works on one tab and not the other simply baffles me.
1. Pupils have a target grade 2. Pupils can either do a higher or foundation Tier exam depending on their ability 3. Pupils do 9 modules and the grade bounderies are different for each module. 3. I use bar charts to report the results back to pupils and parents. Instead of just telling them you got 50% D your Target is C. I also want the target grade to be converted to a mark. I do not want to create another woorksheet inorder to use Vlookup. 4. I now know that Index and Match can do the trick of reading the left columns. But I cannot get them to first consider the Tier for each student.
I was thinking of usind IF
IF Tier is Higher then Index the Higher Table and Match else Index Foundation Table and Match to get the mark. But I do not know how to express this in a way that's readable by Excel
Basically I have 2 sheets. The first an orders sheet which shows all orders from companies with the date of the order, whether it is a repeat order, and whether it has been delivered. The second sheet a customer account sheet which shows the order history by customer. I have used the following formula :
To extract the companies from the orders sheet however if a company has had no previous order (i.e. a new customer) and has not recieved a delivery yet I do not want him added to the sheet.
I have tried amending my formula in different ways but always encounter problems.
I know there are many posts concerning this, but after scouring, I couldn't find one that fit my situation. I have a total of six worksheets, I am only concerned with two worksheets.
Worksheet (functions!)
This one has a list of numbers formatted as general. (Column G)
Is actually a formula/macro that outputs a number... (didn't know if this mattered?)
I have an excel document that has one columb (I) of cells that changes color depending on a specific date (columb h) . The cells that have conditional formating to change the row color based on where it is ( =MOD(ROW(),2)=1), stays blank and the proper color until columb A is filled in. The others show up red. How would I code/format the lines that aren't included in the conditional formating to always show white when no value is entered in columb a.
how to use the conditional format tool, but now the company i designed the spreadsheet for, wants me to implement a change. I'm attacking a copy of the spreadsheet so you can see the problem more easily. Now what I've been asked todo is the following.
1. When the stock quantity (Column H) goes below the re-order level (Column K), they want the entire row to change font colour from blue to red. Now I know how i can change the colour of one cell, like ive done in the example, but I'm not sure how to change the entire row colour. If this can be done with conditioning formating then great, but if not then i'm stuck, and relying on your generosity in helping me out.
i have 2 columns the first is the transaction number and second column is the description
i want to make that all even transaction number will highlight the whole row... how do i make that with conditional formatting? or are there other alternatives?
I have a large X-Y-axis table with about 200 entries in it. There are 6 different entries possible. I now want to give each possible entry in this table a color for making it easier to read.
I could write a formula in conditional formating, so that it works for 3 colors. The problem is now that i can make this only for 3 different colors in conditional formating of excel. Is there a possibility for making this for 6 colors?
I want to set up formula in conditional formating so that when:
$AF6 = "CA" the color is red or if $AF6 = ("GA","ME","PR") then the color is blue
what I came up with is Condition 1 = ($AF6 ="ca") [which will turn the cell red] Condition 2 ="OR($AF6={""GA"",""ME"",""PR""}, "")" [which doesn't do anything]
Asks almost exactly the question I have, but I can't make heads or tails out of the answers, I'm guessing becasue I have Excel 2003 and not 2007 as mentioned in the replies.
In column "A" I have a number; column "B" the formula =A1 copied on down and in column "C" either a 1 or 2 or a 3.
If the number in column "C" is a 1 then the font in the same cell in Column "B" should be black, 2 Blue and 3 Red.
I'm thinking this should be very simple, but so far it's not turning out that way. )-:
if its possible to run conditional formating on graphs, I can do this fine on the actual data
i.e. Have a bar chart with a number of bars all the same colour and just wanted to have the bars change to red if they drop below a certain percentage.
I am working on code breaking, and am working on trying multiple letter combinations, and was wondering if I could spell check the results and have that identify letter combinations that ARE words.
I looked around the forum for a answer but none are quite the same. AA2 contains a date. AN2 contains a Pass or Fail based on =IF(AH4<60,"FAIL",IF(AJ4<60,"FAIL",IF(AL4<60,"FAIL","PASS"))).
Now even if those above fields are empty and no date is in AA2 "PASS" still shows up in AN2. I used =$AA$5="" to make AN2 turn white if AA2 had no date in it. I am unable to copy the formatting along the rest of the AN column without it all refering to just AA2. Is there a way to make it copy and correct the formating like it does with formulas? I had planned to due the same thing with the AO column that contains "DUE" if the person has not taken a test in 180 days. =IF(AA2<=(TODAY()-180),"DUE",IF(AA2<=(TODAY()-150),"CLOSE",IF(AN2="FAIL","RETEST","")))
I have a list of numbers say in column A, but when the number "41", "25", "90", or "92" is in that column, I want a text message to print 6 columns to the right of it (same row) that says "service".
I have a worksheet that I would like to color a range of cell within a row whenever the value of a certain cell in that row changes. For example, if cell A3 have a value of East that row color will be Blue with white fonts, if value is West the row color will be Green with Black fonts, if value is North the row color will be Red with Yellow fonts. This should apply to any row whenever the value is Column A is changed.
i have a list of customers with various information, i would like to rank these customers 1 to 5 and change the colour of the cells dependant on there rank.
Conditional formatting allows me too do this but is limited to 3 formats.
I have Columns A-K filled with data and want the condition to be set on column B if Column B meets a requirement it will then colour that Row (A-K)
So for example Row 3:
B3 = the requirement to change colour to red so cells A3:K3 will turn red B4 = the requirement to change colour to gree so cells A4:K4 will turn red
and this must go down to row 1000 or whatever it may be.
I have three attendance columns M:O which will contain the number of viisits per month. I am averaging these columns in column P. I am using the following formula to calculate the averages of three columns using Windows XP and Excel 2003.
The formula works fine as I initially started to remove the error message from the zero values. My problem started when I created a conditional format to color the entire row yellow, based upon the formula in column A
I have an excel file with 5500 records. I would like to have excel "color code" the rows based on a field's value
What I would like to do is have the value in column Y is: *NO* or "T/P" (note there are *'s in the value) to have it formatted with Grey shading/Red text "N/A" apply a different color shading and if "yes" apply a 3rd shading
Note, that I would like to have the entire row and not just the Col Y cell formatted. How can I do this? Would this slow down Excel alot?
I have a matrix that has been imported into excel from access. The column header is product number and the row header is name. I am then importing the data from an access query that puts the product/name matches in a small table to the right of the matrix (will be hidden when completed). I need to shade the corresponding cell in the matrix if that name has a match for that product. I tried =AND(MATCH(name details),MATCH(product details)) as my formatting equation, but that does not account for whether the matches are in the same row or not, so any combinations of products and names that appear in the whole table are shaded. I am not sure what other commands I can use to get the formatting equation to make sure that the matches are in the same row. Below is an example of my setup, "S" means it would be shaded.
I am trying to have conditional formatting of cells apply only if another cell is blank in 2007. A3 has a formatting of =MOD(ROW(),2)=1, then =AND (A3<>"",A3+15<=$G$1) to change the color based on date and finally =AND(A3<>"",A3+30<=$G$1) to again change the color again by date. What I would like to do is for the cells in columb A to change only if corresponding columb B cell is empty, without using macros if possible.
I am trying to teach myself something new, say I have a list of numbers in two rows and I want to count the numbers and have it tell me if there are duplicates and highlight the duplicates. I got the part about getting Excel to tell me if there are duplicates but I can not seem to figure out the conditional formating part. I uploaded a sheet.
