I attached a file containing two sheets. The first sheet is called Input on this sheet there are several categories of which I displayed the first three on. My ultimate goal is to get the Input per category broken down horizontally over the line-items on the Output sheet. Every category contains several line items to which costs are attached (f.e. in category 10, line item 4000, the costs are 33,000$ and so on).
The problem is that every month the costs are changing per line-item, but also the number of line items per category will change due to the fact that the line-items are only displayed if there are in a specific month costs booked to the line-item. In other words sometimes line-items are added due to costs booked at the line-item, but if in one month there are no costs booked at the line-item it disappears from the overview. A formula containing: '=if(category=10,vlookup(... is to static due to the changing line-items.
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
Attached is a spreadsheet I am working on. The cells I am having difficulty with are I5 and I6. Cell I5 should be pulling a value from the 2nd tab based on C4 and C5 AND C6. Or at least that is my intent. However when I change C6 to 6 I get an N/A. When it is 5 based on 15,000 it enters $2,353.73 but according to my table it should be $2,710.23 I am having the same issue with I6. Based on 15,000 it should enter $190. Where did I go wrong.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
I would like to create a spreadsheet with 3 columns: employee ID, last name, first name. Then on the 4th column I would like to enter the employee ID and have the last name and first name auto populate into the 5th and 6th columns. How do I do this?
In a nutshell, I have data that needs to be sorted but some intermediate to advanced (to me) excel formula needs to be used to sort the ranking properly. I've already used index, match and large but it does not suffice.
I am building a tool for work, and in one of the sections of the main worksheet, I would like the cells to pull specific data from another worksheet that contains the results of a web query. The web query pulls a table of data, with a double header (rows 3 and 4). One column header is for the date and the other is for the time the data below corresponds to. There are also row titles along the left hand side.
I need a formula that will find the column that meets two conditions:
1) Today's date 2) A specific time (referenced from a cell on the main sheet)
It must then pull the data from the cell in that column that is in the row marked "Total".
Here is an example of the data set from the web query:
I have done quite a bit of looking on the web and tried out several different formulas/variations. I think I'm getting close, but just can't get it quite right. Here are a couple that seem close and their results:
This one correctly finds the date and "Total" row, but seems to ignore the MATCH(J3,'Rodeo Data'!$D$4:$JS$4,0) section, which is designed to find the specific time in row 4. It returns either the "Total" row value from the first or last column with the correct date depending on which match type argument I use.
This one returns the standard "#N/A" error message.
I am using Windows 7 and Excel 2010. "Rodeo Data" is the name of the sheet that contains the web query data I have included. The J3 and O3 references are cells in the main worksheet that contain the time I want the match function to find.
The desired output from the formula would be if I referenced it to today (20 Nov 2012) and 19:45, it would return the value of 65,826.
It may also be worth noting that the number of columns and rows in the data set is dynamic.
I have a tab that has Employee Name in one column and the benefit they chose in another column. The employee name is repeated a number of times since they have chosen more than one benefit.
I am trying to create a new tab where the employee name in is the first column (only once) and each benefit is listed in separate columns along the top. I want to put an "x" in the column for the benefit the employee has chosen.
Is there a way to say "look for this employee, see if this benefit is what they chose, and if it is, put an "x", if not, leave blank"?
If I have a column of data with a bunch of values (which can't be sorted & which is constantly changing so cant be broken into another column and then sorted) what formula do I need to output the second occurrence of a value in that column?
Attached example file has data with which I need to do the following;
On the tab "part list" I put in the part number in column F. Column C should then be populated automatically by looking up column F in the tab "Lookup" and showing the value found in column B of that tab.
The difficulty with this is, is that when the part number in column F starts with "DN", the lookup value should end with "FD/A" and when the part number in column F starts with "Z", the lookup value should end with "TY/A".
This last part I can't get it to work. I've tried vlookup with a index/match function inside, but it won't work somehow...
The code in column E & G is as follows:
I have used a lookup table to calculate the value in column H as follows, but cannot get it to work
I have a table full of names and cars sold. The table tracks the person's progress. It is like a diary. It's a simplied version of the DB I am currently working with.
Is it possible to do the following things? I have basically 2 types of questions.
1)When was the last red car sold?
2)When was a car sold irrespective of color?
The answer to each question will be put in separate columns. I have only included January but I will do this for the entire year of 2010 and also I will do this for all of the names in my database. I think there are about 300.
When was the last time ANDY sold a RED car? The answer should be 1/12/2010 The answer will be put in ROW A COLUMN I
When was the last time ANDY sold a car irrespective of color? The answer should be 1/12/2010 The answer will be put in ROW A COLUMN J
When was the last time BILL sold a RED car? The answer should be 1/10/2010. The answer will be put in ROW B COLUMN I
When was the last time BILL sold a car irrespective of color The answer should be 1/11/2010 The answer will be put in ROW B COLUMN J
Where my variables would be based on whether a person is under EnglishSS1 and getting a score of <=10, the resulting rating would be 3. I know this is doable by doing a vlookup with a range lookup value of false. However I have roughly 70 column headers and it will be a bit taxing to combine an If and Vlookup statement to address it.
I have attached a sample sheet for reference : Book1.xlsxâ€Ž
What I want to do is the following, I have two sheets, one where the data needs to be filled and the second where the date needs to be looked up. In Sheet1 I need to find a date for each of the NR2 and NR1 combination. But in the second sheet there are multiple NR1 occurences and also single occurences. So if there is only one, I need that date, if there are several I need the average of all the occurences for NR1, not taking into account the N/A ones.
(some examples from the file) NR2 NR DATE 100707987121951 100702347121960 100707750121960 100707721121960 100702422121960
So for example, NR1 121965 has two dates, 03/09/2002 and 27/01/2004, so here it should calculate the average of these two and put that average in the first sheet.
I was thinking of something like IF(MATCH(?) gives one result,put that with vlookup, else AVERAGE of all MATCH that are not N/A)
I have attached an example s/sheet. Basically this is an excerpt of the data that sits in a pivot table. What I want to do is from another sheet query this data. I don't want to use another pivot table as they are quite hungry in terms of memory and the data source we have is quite large. In essence what I want to achieve is in cell G2 the user enters a code. A function (vlookup?) will then scan column A to find that code.
The function then needs to look across and sum the total of Requests and Responses for all the dates. Whilst the dates may change, the number of dates will remain the same. Once it has summed them it needs to return the totals to cells G4 and G5. Additionally it needs to fill in the relevant total (offset?) for the corresponding week as detailed in columns H-AH. It seems quite a simple lookup issue but I am not very versed in nested lookups. I have looked around and it seems INDEX woudl do the job but I am at a loss on how to construct this type of function.
making a forumla that will return the second, third ewtc values using VLOOKUP or INDEX/MATCH. Attached is a dummy file almost identical to the one I'm working in. In the first sheet there's a dependent drop-down list with the values Sub1, Sub2 and Sub3. This corresponds with data in sheet two listed next to these names. The problem is when I try to populate the table below using VLOOKUP etc it just repeats the first row over and over rather than defaulting to the second and third row results
I have some data which I update every now and again. Then I extract and clean up and currently have it output to 4 columns.
The four columns currently looks like this:
A | B | C | D 1 name name2 stats stats2 2 .... 3 ....
Each column is then populated with a decent amount of names and stats, and the same name occurs multiple times. I'm looking up a specific name in the A column, and can extract the stats in C fine using INDEX/MATCH, but it only returns the data from the first instance the name occurs. I've googled it a bit and believe I could possibly wrap my head around returning multiple instances.
However, there are a couple of other criteria for my extraction of the stats which makes me believe I'm in way over my head. The data is in chronological order, with the newest on the bottom. I'm wanting to extract the stats in inversed order so starting from bottom going upwards, if that makes sense. Further, preferably I'd want to limit the amount of extraction to X amounts. And lastly to make it really complicated, for the newest entries stats are not yet available so only the names (column A and B) are populated, I need it to skip those entries, since, obviously, there are no stats there to extract, and I wouldnt want to end up with a lot of blank cells in my summary.
I have a list of people and the dates they completed activities on. I would like to do a vlookup (or index/match) that returns the most recent event. For example, if I was after the most recent date that 'rogers' went 'fishing' it would be 03 Feb 07....
From the highlighted cells at B17 to B19, while using some kind of lookup or indexing method, I want to count the number of cells in that specific range that's great than zero. This list is just a sample, the list will be much bigger and order may not be the same--that's why I need to lookup the project name.
I have two data sets across two worksheets. The first worksheet contains sales order numbers (Sheet1:column A) and other data . The second worksheet contains sales order numbers (Sheet2:column A) and the product details.
On sheet1, I had to manually duplicate a sales order number (inserting another row) if the number of units of the order is greater than 1. I then need to fetch the product details from sheet2 for each unit for that specific order number. However in sheet2, there are multiple products for one sales order number.
How do i create a lookup/match to fetch the product details for each sales order number without duplicating the product details if there are multiple products for one sales order number?
I know a simple vlookup function will return the values that it matches first and that is not what i want.
This had been hunting me for weeks and I still could not come over it after weeks of study the conditional formating IF, match, index, Vlookup, etc to find several duplicated value, e.g Column B = Name 1 & Row B = Time and so on, where as Name will have data of Name 1 duplicated in different time, while row B, "Time"would change to a different Name and maybe it would go back to Name one.
My problem was dont know which formula I can use in a different sheet to bring back the data to Name 1 did Task A at Time A, while Name 1 did Task B at Time K, etc. If this is not Name 1, then Name B replace above.
Using Excel 2003 and am trying to do a calculation by customer, by service type. Attached is the workbook and I've tried numerous ways to do this. On the revenue calculation worksheet, I am tryng to calculate the type of service minutes from the data retrieve worksheet, multipled by the service rate on the rate table for the specifc type of minute by customer. I'd like to build it as a vlookup by customer and then by service type, but have run into difficulty.