# Index Match And In A Conditional Statement

Jul 9, 2007
1. Pupils have a target grade

2. Pupils can either do a higher or foundation Tier exam depending on their ability

3. Pupils do 9 modules and the grade bounderies are different for each module.

3. I use bar charts to report the results back to pupils and parents. Instead of just telling them you got 50% D your Target is C. I also want the target grade to be converted to a mark.

I do not want to create another woorksheet inorder to use Vlookup.

4. I now know that Index and Match can do the trick of reading the left columns. But I cannot get them to first consider the Tier for each student.

I was thinking of usind IF

IF Tier is Higher then Index the Higher Table and Match else Index Foundation Table and Match to get the mark. But I do not know how to express this in a way that's readable by Excel

View 10 Replies
ADVERTISEMENT
May 22, 2014

I have three worksheets the first one called Econ the second one called CheckLogs and the third is a customer sheet. I am needing to match up a cell from the Econ sheet with a cell from the Checklogs sheet and then it matches a cell from the customer sheet with a cell from the checklogs to determine what customer sheet. My problem is how do I loop through the customer code cell until it finds the correct cell.

=IF(B1=CheckLogs!B2,INDEX(CheckLogs!$F$2:$F$4493,MATCH(Econ!G2,CheckLogs!$C$2:$C$4493,0),MATCH($B$1,CheckLogs!$B2:B4493,0)), "")

so in the formula "B1" is located on the customer sheet and is the customer code field, "CheckLogs!B2" is on the CheckLogs sheet and is the customer code field. I'm just not sure how you loop if the customer code in B1 doesn't equal the customer code in CheckLogs!B2 and run through the formula again.

View 11 Replies
View Related
Jul 3, 2009

I'm trying to use index match with IF statment. I understand how this works just not quite sure how to get a 'True' return based on 'logical_test' portion of the IF function. I want a TRUE return when column H starts with 'hbap.adroot.hsbc/gsc' or alternativly just contains the letters 'GSC'. If column H contain 'GSC' Column A will output 'GR' not HBAP'

View 2 Replies
View Related
Feb 26, 2010

I have a table I use visually, and I put it in a spreadsheet. Instead of finding a table value based on row and column label decisions, I use it as follows. I decide the row by matching exactly the height, h = 8 ft. In that row, I match the next larger value of 10 kips, in this case the value is 12.72; I then pick the column header label, in this case the value is 4 x 8.

I don't know how to make"B8:L8" equivalent to "B"&3+row : "L"&3+row in the 2nd Match formula?

View 4 Replies
View Related
Dec 30, 2009

I have a list of 31 values in separate cells. The values are three digit letter codes. Here is an example of 5 of them:

ATL

GMI

WOB

COI

PTS

What I am wanting to do is have a Conditional Format to change the color of the cell to Pale Blue if the value equals another cell that is within a range.

View 4 Replies
View Related
Apr 10, 2014

Attached spreadsheet.

Basically I have 2 sheets. The first an orders sheet which shows all orders from companies with the date of the order, whether it is a repeat order, and whether it has been delivered. The second sheet a customer account sheet which shows the order history by customer. I have used the following formula :

=IFERROR(INDEX(Orders!$B$2:$B$23,MATCH(0,INDEX(COUNTIF($A$1:A1,Orders!$B$2:$B$23),,),)),"")

To extract the companies from the orders sheet however if a company has had no previous order (i.e. a new customer) and has not recieved a delivery yet I do not want him added to the sheet.

I have tried amending my formula in different ways but always encounter problems.

View 3 Replies
View Related
Apr 11, 2009

This had been hunting me for weeks and I still could not come over it after weeks of study the conditional formating IF, match, index, Vlookup, etc to find several duplicated value, e.g Column B = Name 1 & Row B = Time and so on, where as Name will have data of Name 1 duplicated in different time, while row B, "Time"would change to a different Name and maybe it would go back to Name one.

My problem was dont know which formula I can use in a different sheet to bring back the data to Name 1 did Task A at Time A, while Name 1 did Task B at Time K, etc. If this is not Name 1, then Name B replace above.

View 4 Replies
View Related
Apr 16, 2009

I know there are many posts concerning this, but after scouring, I couldn't find one that fit my situation. I have a total of six worksheets, I am only concerned with two worksheets.

Worksheet (functions!)

This one has a list of numbers formatted as general. (Column G)

Is actually a formula/macro that outputs a number... (didn't know if this mattered?)

View 6 Replies
View Related
Oct 2, 2013

I want to highlight a cell if the text displayed from an IF formula is equal to the cell content.

CELLS BK10:BN10 are merged and have entered into them the following text "SELL"

Cells BJ20:BP20 are merged and contain the following formula which currently results in the cell displaying "SELL"

=IF(BM22<=-0.08,"SELL", IF(AND(BM22>-0.08,BM22 < -0.03),"NO INDICATION", IF(BM22>=-0.03,"HOLD")))

Cell BM22 is a percentage calculation of the differences between two different days of volume for this stock and that formula is: =(BH22/BH25)-1 Cell BM22 currently is calculating the result to be -65.65%

When I set up a CLASSIC Conditional Formatting using a formula (="If($BJ$20=""SELL""") to check the if the text in cells BK10 match the text displayed in cell BJ20 - I get no error messages and no formatting?

I am using Mac Office Excel 2011. I feel like I have tried everything including changing the Number selection type of the cells to TEXT. Nothing seems to works.

View 1 Replies
View Related
Oct 8, 2009

I have this table

.......A.....B.....C....D

1.....I......a.....d.....g

2.....II.....b.....e.....h

3.....III....c.....f......i

As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i

I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on

I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.

View 9 Replies
View Related
Oct 8, 2009

I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)

View 2 Replies
View Related
May 23, 2014

We know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.

sampleexcelhelp.xlsx

The columns that need to be filled are shaded in dark pink.

View 5 Replies
View Related
Jan 21, 2014

See attached file, "Rate Sample Index-Match Formula".

I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".

In the 1st tab, "TEST FILE" there are a series of columns as follows;

A = Service

B = From

C = To

D = Rate

In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)

The formula needs to do the following;

1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green

2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue

3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59

For Example;

The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.

Additionally, if we were to add service as an additional lookup match how would this work?

View 3 Replies
View Related
Sep 21, 2013

I have a WB with multiple sheets. I have a Feed sheet that automatically pulls data from the web. I have a Scores sheet that currently has all head to head matchups each week for an entire season. So I want to check the cells on the Feed! sheet to find a partial match and if partial match exists then copy cell that contents score from feed sheet to the score sheet next to the appropriate teams name. Currently I have to manually enter all scores each week for the rest of my WB to update.

I need to look at Cell A3 (on the Feed sheet) which has "New York Jets" then search for a partial/similar match on the score Sheet (which is NY JETS, in this case). NY JETS could be in column B (rangeB2:B257) OR column D (rangeD2:D257) BUT I need to search by row, not column, then once a match is found check the cell to the immediate right and only if the cell is blank copy data from the (!feed) sheet to that blank cell on the (!scores) sheet

This is what happens if working right =

look at cell A3 on the (!feed) sheet = "New York Jets" then search (!scores) sheet Column B and Column D by row for a partial match, finds "NY JETS" as match in cell D8, if cell E8 is blank then copies cell H3 from (!feed) sheet, and pastes to cell E8 on the (!scores) sheet, if cell is not blank continues search until 1st blank cell to the right of matching cell is found (as there will be mutiple matching cells with blank cells to the right but I am only interested in the 1st blank cell found, once found and data copied the process is done and then starts over with cell A4)

Look at cell A4 (!feed)= "New England Patriots" then search (!scores) sheet Column B and Column D by row, finds "NEW ENGLAND" as match in cell B8, if cell C8 is blank then copies cell H4 (!feed) sheet, and paste to cell C8 (!scores)

Once this is done it moves on to the next cell in the next row on the (!feed) sheet, A5, to find a partial match for the data in that cell. I need to continue the search for each cell A3 to A74, and if no match is found to move on to the next cell A6... (based on the way the data is pulled in from the web there are some blank cells as well as some cells that say Game Final, this data won't be on the scores sheets in column B or D).

View 1 Replies
View Related
Feb 4, 2014

I have two sheets of data , sheet A and Sheet B.

Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.

I have filled out the first two rows of results that should be returned as an example.

One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.

View 3 Replies
View Related
Aug 28, 2012

Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.

2011

2011

2011

2012

2012

2012

[code].....

View 5 Replies
View Related
Jul 11, 2008

INDEX/MATCH multiple ocurence match values needed

View 9 Replies
View Related
Jun 10, 2009

Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.

View 10 Replies
View Related
Jan 15, 2013

I couldn't resolve the formula of Index-Match for getting the values that matches the following criteria

1) Match the "Category" of Table 1 to Table 2

2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.

Once the above conditions are met, Take the Result from Table 2

Table 1 is for Input and Table 2 is for Database.

Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.

Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx

View 3 Replies
View Related
Oct 6, 2009

I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:

View 3 Replies
View Related
Sep 27, 2007

I am looking to sum the values found at the intersection of multiple values based upon a vertical and horizontal lookup. The formula I am trying is as follows (which results in #Value):

{=IF(ISBLANK(G$9),"",SUM(IF(INDEX('Journal'!$A$20:$Z$1020,MATCH("Prior",'Journal'!$F$20:$F$1020,0),MATCH(G$9,'Journal'!$H$19:$Z$19,0)),"")))}

View 9 Replies
View Related
Apr 6, 2009

Example:......

On my worksheet 1, I have two dropdown boxes: B7 (that gives the building name) and B11 which gives the Type of Commission (Renewal, Expansion, New). B 20 is supposed to automatically select the percentage based upon what B7 and B11 select. E.g. B7 = House, B11 = Expansion then B20 should be 3.

This is my formula.

=HLOOKUP(B7,'Building Details'!$A$2:$R$24,MATCH(B11,'Building

Details'!$A$2:$R$2,0))

View 3 Replies
View Related
Jan 8, 2014

I am using sheet 1 to pull data from sheet 2 using this formula

=INDEX(Attendance!D:D,MATCH(C2,Attendance!A:A,0)).

This on its own works to pull the data. However the data is repeated for each 'set' of data ie each group of repeating names, as I drag down. I just want the data to appear once on the first lie of each group so I have added an if to the formula

=IF(C2=C1,"No Match",

My complete formula is now

=IF(C2=C1,"No Match",=INDEX(Attendance!D:D,MATCH(C2,Attendance!A:A,0))

View 2 Replies
View Related
May 3, 2009

On the attached workbook, on the "Progress Summary" page, cell C30 has a formula which should list the names of pupils who made 0 progress (as referenced by the Raw Data page, column R [progress] and column A [name].)

View 3 Replies
View Related
Dec 3, 2009

I have never used the aforementioned functions before, but i assume thats what i need to do here....

In the attached table, what formula do i use to return the value '8' i.e. whats in column "Epsilon" and row "Three"

If you could let me have the generic formula i need as well, that would be good.

View 11 Replies
View Related
Feb 3, 2010

I can't figure out why the N/As are coming. In G2 I have =INDEX(Area_Codes!$D:$D,MATCH(F2,INDEX(Area_Codes!$B:$B,0),0)). If I replace F2 with 407, I get FL which is right. But why do I get N/A??

View 4 Replies
View Related
Feb 18, 2010

L26 returns incorrect information. Input parameters are F29 and F30. In its current state, it returns the value “b”, where I think it should be returning “1”, i.e the intersection point for “3Ph” & “Single-core 70°C thermoplastic non-arm Cu Table 4D1”

View 6 Replies
View Related
Mar 5, 2009

If the value on sheet2 columnA ,matches value sheet1, column AC

then corresponding row value sheet2,column E be put in corresponding row for matched value ,sheet1,column Z.

View 6 Replies
View Related
Mar 30, 2009

I have the following array formula that matches against a table with 3 criteria (one specfically is a time), it works ok until the time criteria is not of the value searched for, it may be +/- 30 minutes out, is it possible for the formula to index/match to the actual value or to find the nearest match possible, its in column B.

View 3 Replies
View Related
Apr 27, 2009

insert =IF(ISNA into the following formula? =INDEX(Data!$AE$2:$AE$10,MATCH(1,(Data!$AI$2:$AI$10=$A$11)*(Data!$AD$2:$AD$10=Sheet1!$A$6),0))

View 3 Replies
View Related