I am trying to match up company codes across three different columns. I am inserting rows to get them to match up. However, there has to be an easier way.
1017
1017
1027 Total
1051
1021
[Code] ...
I have trying for 2 days now to write a macro/VBA that looks up IF the stock codes (i.e., in column A and G) match THEN insert the ID_ISIN from column H in the empty ISIN column C.
or should i use Vlookup?
I'm trying to match stock portfolios of mutual funds with stock indexes to find out how much the portfolios deviates from the indexes (active share).
The deviation is simply calculated as the percentage of the portfolio holdings not included in the index.
The data I have is 10 years of monthly portfolio weightings for 30 mutual funds and 8 indexes, organized with company names in column A and the percentage weight for each company in each month in the adjacent rows (see simplified screenshot). I want to match all companies with all indexes.
Twofold:
1)The mutual fund data comes from one source and index data from another. This means company names are not spelled exactly the same.
2)Within the mutual fund datasets, a company might be listed more than once with different names. The different names refer to different periods in time, so what should be matched with the index is the sum of these columns.
The specific task that I need to accomplish is to match company name in the portfolio with the index and then return the absolute difference between weight in the portfolio and the weight in the index for each month. (see screenshot).
Hence the result I'm looking for is a matrix of company names (of each portfolio) in col A and the absolute difference between the portfolio and the index weight in the adjacent row.
The best solution I've come up with is to device a list of all the portfolio company names, including "doubles", and then for each index, add these company names and copy the row weightings. This I'm not particularly happy with because index weightings would no longer sum to 100 and it would be difficult to check for errors. Also, it would still take a lot of time.
my w/s has a column for codes and then currency columns. Users may select codes from a list of over 600 codes. I need to enter a formula that subtotals by each code used.
table looks like this:
CODE 1Q$ 2Q$ 3Q$ 4Q$ SUBTOTAL ADJ ADJ ADJ TOTAL
8810 10000 10000 10000 10000 40000 50000 45000
8910 10000 10000 10000 10000 40000 50000 45000
8810 10000 10000 10000 10000 40000 50000 45000
8811 10000 10000 10000 10000 40000 50000 45000
so in this example I need subtotals for 8810, 8910 & 8811
not sure if I need to use a pivot table, an array formula or if statement.
I have so many part codes in column A with their Group in Column B.I want to arrange in ascending orders only those part codes which have almost matching in Column A with other part codes with different group.Please see the attached file and expected result.
View 4 Replies View RelatedI have a large sheet of data I'm trying to sort through. Each row of data has a column that contains a long string description. Each of these strings contains a three letter codes in all caps that I want to be able to pull out. I have a seperate sheet that has all of the possible three letter codes in one column. Is there a formula that can compare each string of text to this list of three letter codes and if it find a match put that code in a column on the original sheet?
Doc Number
String
Code
33333
This is an example string of text. An example three letter code would be HCB. The location of the code within the string varies.
HCB
33332
This is an example string of text. An example three letter code would be CDQ. The location of the code within the string varies.
CDQ
33331
This is an example string of text. An example three letter code would be RCA. The location of the code within the string varies.
RCA
Codes
DCP
HCB
RCA
CDQ
LCP
DCA
SCR
I am working on a large volume spreadsheet comprising of the usual mailing list fields such as first name, surname, company, address1, address 2 , suburb, state, postcode etc etc
Is there a way for Excel to auto fill a line of details (or display a list the matching entries)?
this way, i can start to enter a semi-unique field such as surname, company or address and a list of matching entries pop up for me to select the best fit.
I then would fill in the remaining data.
For a landscaping company, who is looking to service gardens more effectively/efficiently, they are mirroring the below variables to the amount the client is willing to pay per hour. I also have a sample file.
I have, on Sheet1, 8 columns I'm working with:
R3:R132 is the currently hourly rate
L3:L132, M3:M132, N3:N132 are current units, volume, and labor hours respectively by location.
AD3:AD132, AE3:AE132, AF3:AF132 are new units, volume, and labor hours respectively by location.
AI3:AI132 is the suggested hourly rate by location. Note this is already calculated and filled in. I need to calculate new units, volume, and labor hours based on the suggested hourly rate.
On Sheet2, I have 4 columns I'm working with:
A2:A161, B2:B161, C2:C161, B2:B161 are hourly rates, units, volume, and labor hours respectively.
They are laid out in combination with one another to show possible combinations of these variables that make sense for the landscaping company.
My goal is to figure out what combination the company wants to go with for a given hourly rate on Sheet1 given the following logic to follow:
1) Attempt to reduce labor hours to get to suggested hourly rate - This is to calculate new labor hours on Sheet1 in cells AF3:AF132.
I have a nested if formula that isn't working and I know there is a real simple fix.
Here is the situation: If Company A (A1) and Company B (B1) both have indices greater than 125, I want that to show that in my recommendation. For example: I used if(A1>125&B1>125,"Company A and Company B",if(A1>125,"Company A", if(B1>125,"Company B","None"))). For whatever reason, the first nested if statement isn't working correctly. what I am doing wrong with this if/and statement?
I'm trying to convert various codes from one column of an excel spreadsheet into different codes in another column. I was able to accomplish this with "If" statements, however I'm only able to string together seven of these statements in one command. Is there a better way to add formulas for more than seven conversions? Below is a copy of what I've done so far with the seven converts:
=IF(ISNUMBER(SEARCH("WARN",J2)),"Warning",IF(ISNUMBER(SEARCH("PSSNAP",N2)),"Sales",IF(ISNUMBER(SEARCH("WARN",L2)),"Warning",IF(ISNUMBER(SEARCH("2699",L2)),"Warning",IF(ISNUMBER(SEARCH("4004",L2)),"Warning",IF(ISNUMBER(SEARCH("2036",L2)),"Warning",""))))))
I want to add about 15 more codes to convert within this formula but it's maxed out in the format I'm using.
I have a list of companies, each company has it is own name and particular code.
I specify Cell D12 For Company Code and Cell E12 for Company name.
How to write code that write company name automaticlly in cell E12 when I write the company code in cell D12?
i need to match 2 columns on one worksheet with 2 columns on another.
One column is alphanumerical (Reference Numbers), the other is company names.
I need to ensure that both the Reference and Company name match from one sheet, with the company and reference from another.
e.g if A1 and B1 on Wks 1 = A1 and B1 on Wks 2 = TRUE, anything else is FALSE.
There is likely to be Reference number and Comapny name duplicates, therefore the trick is to ensure that the number of duplicates match?(I.E ABC Company, Reference number 1234 may appear 5 times on worksheet 1, however if it is only on Worksheet 2 4 times, then this must be flagged).
I want to add these numbered steps onto the macro I already have, which I pasted below.
1. Starting in Row 2 in the worksheet named Report 1 look at contents in Column A then look at the contents in Column C, if the contents in Column C do not match exactly the contents in Column A then copy the contents in the range column C:E from that row till the last row in Column C:E.
2. Now we will have a range that is made up of cells from C:E. I would like to move that range down a row at a time, until the first cell in Column C from the range Column C:E matches exactly the contents in Column A. Then I would like to continue this pattern for every row in the worksheet.
I have two spreadsheets, both contain matchable data. First one with amounts. Next one hs customer name, period and amount columns.
View 3 Replies View RelatedI need to match the first column with the second column, and if is the same value, copy the value in third column to the forth column.
View 1 Replies View RelatedI have two worksheets, sheet 1 and sheet 2. On sheet 1, I have a information on two columns (Column A and B) Column a has information up to row 10 (aaa, bbb, ccc, ddd, ...). On column B, I have 111, 222, 333 . I have same information on Sheet 2. However, sheet two has an additional column (Column C) with 10 rows on information z, y, x, w, v ...
What I need to do is to match column A and B in sheet 1 to column A and B in sheet 2 and if both columns matches on the same row, copy the value in sheet 2, column C and paste it on sheet 1 column C.
Important: Information on sheet 2, column B may be twisted (As they may not appear exactly the same as in sheet 1. Which means 111,222,333 can be 222,333,111 along the column). Therefore, need to match the entire range.
I need creating a formula that matches the values between two separate columns with results from that matching in the third and fourth columns.
Example: Column A contains the first set of values and column B contains the second set of values. The result in column C would be all the values that are in both columns A and B and the result in column D are all the values that are not found in both columns A and B.
Column AColumn BColumn CColumn D
122123123122
123133322133
231221323221
311322231
322323311
323333333
See attached spreadsheet : match_values.xlsx
Alright, so I need data in column A(Last names) and data in column B(First name) to match their respective names on another sheet. When a match is made, it will return column C(Hours worked).
I originally used Vlookup to match last names, something akin to =VLOOKUP(A:A,Week1!A:P,4,FALSE)
But this does not account for employees that may have the same last names. Is there a way to combine two vlookup's? Or is Index a possible solution?
I have two columns listing about 400 and 500 names respectively.
First Column has names in alphabetical order and the second column is random.
One column has names in this format: Last name, First name and the other column lists the names as first name and then last name without the comma .
I am trying to see if the list of names in one column exists in the other.
Is there a way to see this without changing the format of the names in each column? If so do I have to erase the comma?
Name Lists (1).xlsx
I am trying to 'stagger sort' multiple columns, but am having some difficulties.Ex.
Say A and B are lists of part no and C is data corresponding to column B. I have:
A B C
1 2 .
2 3 ,
4 4 ;
5 7 '
8 9 "
I want:
A B C
1 _ _
2 2 .
_ 3 ,
4 4 ;
5 _ _
_ 7 '
8 _ _
_ 9 "
(the _ are just supposed to be empty place holders, without them I have formatting issues)
Is there a 'quick' way to sort them this way?I am attaching the actual file that I am working with.
My requirement is to match 2 columns of two different sheets. I know about Vlookup for exact matching but here I neeed to do partial matching.
For Example: Sheet1 Company Name= Opera Technologies
Sheet1 Address= 104/Main Street
Sheet2 Company Name= Opera
Output should be like this in different column: Opera, 104/Main Street
I have 2 columns of data. Both should ultimately have identical data,
but both have extranious data I need to separate. These lists will be
300+ long, so by hand is taking forever. Example:
Column A Column B
12345 12344
12346 12345
12347 12346
12348 12347
12349 12349
I need a way to extract the 12344 from column B since it is not in A,
and 12348 from A since it is not in B. They do not have the same number
of entries.
I have a problem in my list cheking. I have two sheets in my attached excel file. I have mordified for my own job security purpose. I need to check the individual cells of "parent" column in "Missing Asset" with "parent" column of "Asset" worksheet. It means, presence of cell text of A2 of "Missing Asst" sheet has to be checked with "A" Column of "Asset" sheet. If A2 text is present in "A" Column of "asset" sheet then "Y" should appear in B2 cell of "Missing Asset" sheet. Else "N". Its just Column text checking wothin two work sheet & then identify the cell which is not match. I guess "VLOOK" can work. Is it not?
View 3 Replies View Relatedi am using this spreadsheet to monitor when equipment is being borrowed in the office and want a quick view reference (columns A-C) based on the data entry in columns &G. Please note that htis is an example as the original file is confidential, if someone can answer my query here i will transfer the formula to my actual workbook. In the actual workbook the data entry and quick view will be on different sheets if this makes a difference.
View 3 Replies View RelatedIn Col A, from A1:A12 I have
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
In column G from A1:A6, I have
6
9
7
11
15
How could I return an 'x' in column C against the A values corresponding with the G values, for example an 'x' in C6, an 'x' in C9, an 'x' in c15' etc? And a blank for example at C8 and C14.
I have the following columns (O & S):
S O
-----
1 3
3 7
6 6
8 4
1 3
2 8
1 6
I want a code (Formula) do the follwoing: Matching number 1 in column S with number 3 in Column O and count how many matches found in the two columns, Which in this case only two.
I have a document where there are hundreds of rows and columns. The rows contain lines of data, while the columns are topics. Each row needs to be traced to an appropriate column. Once traced, I simply check off the appropriate cell with an X. I have to make sure that each row has at least one "X".
I have attached a sample file. look at cell B8. The statement in this row reads "Issue Placard information and registration". Now, I already know what column this statement belongs to (column CT).... but I don't want to scroll over hundreds of columns to that particular column, or have to freeze any panes, to locate that cell and mark it off. I have been doing this manually and it is incredibly tedious and time-consuming. Is there a way where I can locate the appropriate cell and go to it without having to scroll? When I'm scrolling I have to not only scroll, but I have to read the rows and columns again to make sure they indeed match. I want to be able to locate the right cell instantaneously and just enter an X value.
I have a document where there are hundreds of rows and columns. The rows contain lines of data, while the columns are topics. Each row needs to be traced to an appropriate column. Once traced, I simply check off the appropriate cell with an X. I have to make sure that each row has at least one "X".
I have attached a sample file. look at cell B8. The statement in this row reads "Issue Placard information and registration". Now, I already know what column this statement belongs to (column CT).... but I don't want to scroll over hundreds of columns to that particular column, or have to freeze any panes, to locate that cell and mark it off. I have been doing this manually and it is incredibly tedious and time-consuming. Is there a way where I can locate the appropriate cell and go to it without having to scroll? When I'm scrolling I have to not only scroll, but I have to read the rows and columns again to make sure they indeed match. I want to be able to locate the right cell instantaneously and just enter an X value.
I have a list of names in a column and another list of names in another column. The columns are named patient and user. Is there a way to right a formula that would highlight a name match when a name matched in the two columns in the same row?
View 9 Replies View RelatedI have two columns of data, in A and B. Column A has about 500 rows of numbers, while column B only has about 150. All the numbers that are in column B exist in column A.
(Column B is a monthly product production list, while column A is a "master list" of all products that can be produced)
I need someway to match the data in Column B with Column A so they line up.
I was thinking something like this, but don't know how to do it:
"Where value in column A = value in column B, then copy this data into cells D1 and E1" (so the values line up next to each other)
is this possible? Maybe with some advanced filter? Or a macro? It seems kind of silly, but I just need to have the data next to each other without doing it manually.
