I have these two formulas in my excel that are being used to "prepare the data from a web query. Basically what I want to do is strip a number such as x.xxxxx to only x.xx and change to dot to a comma so that the end result it will be x,xx.
So far i have two formulas: =MID(A1,10,4) and =SUBSTITUTE(A5,CHAR(46),CHAR(44)) and I want merge these (or find a better solution).
Trying to merge two formulas in one cell. I have two cells with different formulas in them. I try to merge both formulas in a third cell to show different results. Depends on the case. All solutions found in searches made by me does not fit my case. I can not use pivot table and not concatenated. Just a simple merge both formulas in a third cell if possible.
Case1 :
VB:
=If(ISERROR(MATCH(A3;FOLHA2!C2:C5;0));"";INDEX(FOLHA2!E2:E5;MATCH(A3;FOLHA2!C2:C5;0)))
join to
VB:
=SE(�.ERRO(CORRESP(A3;Folha2!C2:C5;0));"";�NDICE(Folha2!I2:I5;CORRESP(A3;Folha2!C2:C5;0)))
Case2 :
VB:
=If(ISERROR(MATCH(A3;FOLHA2!C2:C5;0));"";INDEX(FOLHA2!G2:G5;MATCH(A3;FOLHA2!C2:C5;0)))
join to
VB:
=If(ISERROR(MATCH(A3;FOLHA2!C2:C5;0));"";INDEX(FOLHA2!K2:K5;MATCH(A3;FOLHA2!C2:C5;0)))
I have two cells with different formulas in them. I try to merge both formulas in a third cell to show different results. Depends on the case. All solutions found in searches made by me does not fit my case. I can not use pivot table and not concatenated. Just a simple merge both formulas in a third cell if possible.
[Code]....
Attached File : example.xlsx
I would like to merge the following formulas into a single cell . . .
=IF(ISNUMBER(MATCH(D61,{"E"},0)),IF(D66>=VLOOKUP(D61,{"E",3.1},2,0),"NM","X"),"")
=IF(ISNUMBER(MATCH(D61,{"S"},0)),IF(D66>=VLOOKUP(D61,{"S",30.1},2,0),"NM","X"),"")
In the new formula, I need to add the following:
If D61="E", then I need the cell shaded in red with black font
If D61="S", then I need the cell shaded in bright yellow with black font
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
I've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.
View 9 Replies View RelatedI'm trying to automate creating certain keyword combinations I need, based off of the values I input into reference cells in columns A - E; the goal is to compile a list of keywords which I will then use to track my rankings in search engines.
I'm looking to only output 500 keywords, so some of the cells in columns A, B, C & E will not contain data (column D will always have a primary Geo-target listed). This results in some of the concatenate formulas I've created outputting partial data (i.e. if there is no data in cell A10, and cell D2 contains the word "Knoxville", then cell I10 will output the data, "Knoxville "). How can I setup conditioning formatting or a formula so that these auto-generated cells appear blank if one of the reference cells has no data within it?The reason why I need the above to work is because I want to setup a formula that automatically counts the # of keyword combinations created by the data entered into any of the reference cells. With the partial combinations being listed, it skews my data. Which leads me to my next question: what is the best formula for counting the # of cells containing a full keyword combination from any of the cells listed in columns G - O (minus the data in the header cells; i.e. G1, H1, etc...)?Lastly, is there a formula I could use that would then aggregate all of the full keyword combinations within the "Complete Keyword List" column (column P)?
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies View RelatedI have a macro running this code to strip out unwanted formulas and formatting.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2
'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If
Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
Is it possible to hide formulas from the formula bar while still having the formulas active?
View 8 Replies View RelatedI have a spreadhseet with various functions on it and what I am trying to do is this.
Cell E4 returns a >35 or <35 true or false value
Cell G4 is either blank or has "Yes" text type into it.
What I am trying to do is get cell F4 to return certain arguments.
E4 = >35 and G4 is blank I want it to state "Email Hiring Manager"
E4 = ,35 and G4 is blank I want it to state "Wait"
I have a basic IF formula that returns this
=IF(E4>35,"Email Hiring Manager","Wait")
Then if cell G4 is populated with a Yes the formula needs to overwirte the origonal if with the return arguments of
=IF(G4="Yes","Email Agency","Email Hiring Manager")
If yes then what would be Email Hiring Manager (yes will only be input if E4 is greater than 35) will be overwritten with "Email Agency"
Can this be done with two If formulas or does there need to be 3 or more to count if other IF formulas are actually returning a value?
If you have a cell with the value ="2*c2+3" NB: (Notice the ""), then to make excel convert the formula in another cell to =2*c2+3 (notice the removal of ""), so that it can calculate the value of the cell instead of showing a textstring?
I have formulas in a column and they are working unless I edit them to include another function, more cells, whatever, then they display as formulas instead of the result. I've gone to Tools --> Options --> View and the Formulas box is not checked. As well automatic calculation is on not manual.
View 4 Replies View RelatedI have two columns, which have different length and in which there can be three types of data:
The data also in the first and the second column, so it is an old data.Second is, that the data is in the first column, but not in the second, so it is old, but it was solved.The third type is, when the data is in the second column, but not iin the first, so it is new data.
My task is to regularly update the list (so I have to merge the new and old columns), to see in which conditions the data is, but not to delete any of them (only the recurring, so if it is old, then it must not be listed two times).
I am trying to merge two different databases in the next week. The problem I am running into is the name from 1 database isn't always the same on the other database.
I want to merge Database 1 with Database 2 and create a relationship with them both by using the database 2 internal #. As you can see in my table database 1 has similar names to database 2 but they are not exact. I want to match these names and have the formula on match tell me what the database 2 internal # is. I have also uploaded a sample excel doc with a note in B2.
database1
Herb Chambers Ford of Braintree
Herb Chambers Honda of Seekonk
Dimmitt St. Petersburg
Database 2 matched internal #
Database 2
Herb Chambers Ford of Braintree (Dave Dinger Ford)
Herb Chambers Honda Of Seekonk (7-FI)
Dew Cadillac (Dimmitt of St. Petersburg)
Database 2 internal #
15360
15301
25413
How can I merge cells in the same row so when I sort a column (A>Z for example) the contents of the row near the selected one change position as well. I paste a picture for example.
View 9 Replies View RelatedI have a need to merge cells in a row and there to be more than one line of data in the merged cell. I also format it to wrap text. But I found that when doing this with merged cells it won't automatically resize the height of the row to accomodate the wraped text. It can be done manually, but this is a pain.
View 13 Replies View RelatedI have a need to get the data from columns A and B and transfer to C but one line from A and second line from B and this successively until the end of A and B. They will have the same number of lines.
View 3 Replies View RelatedIs there any way that you can combine two worksheets or Excel files, for example:
WORKSHEET_1 has columns and values as:
firstname
lastname
city
state
WORKSHEET_2 has coulms with NO values as:
firstname
lastname
address
city
state phone
I want to take the info from WORKSHEET_1 and insert it into WORKSHEET_2 without specifying any columns since WORKSHEET_1 might sometimes have only 1 column and sometimes might have all 5 columns.
The purpose of this is to create a standardized Excel file that I need to import into a Database, however the users might have Excel files without all the columns required therefore I need to "standardize" the worksheet before being imported and have any black values import as NULL into the Database
I need to merge for worksheets (in the same workbook) into 1 large worksheet.
Is there a command that does this? Or do you guys have a custom macro that does this?
I want to do....is...a macro or something....to be like "Hey...were going to match up column information based on the first column, there exists both the same data in both sheets....as you can see in A3 and A2, now, I want to be able to add the information that is in book1, into the "DBL approved", so like...the 2nd row, I want columns B-G to be filled via book 2 because its saying,
"okay, A3 in DBL has the data 00-120-01, but there exists no data next columns over...but oh look, A2 in Book1 does, let's fill in that missing information!" so now it'll fill in the bullet points, brand, segment, etc."
How I can merge two columns together and keep the data in both columns?
I have an address issue when the data was converted to excel it put the numbers part of the address in column "C" and the street name in column "D".
I am a teacher and my department uses Excel for grades. We need to be able to print grade reports for students. We currently use a mail merge to do this, but some teachers are having a hard time with this process. They don't seem to understand using the two programs together.
View 14 Replies View Relatedi am trying to create a macro that merges two columns in excel.
View 9 Replies View RelatedI've got a workbook with a ton of worksheets in it. Every worksheet has 4 columns a, b, c & d that I want to merge so that column a will be the contents of the 4 cells above seperated by _ so it will become a_b_c_d. not sure if im explaining this right but i think you'll get what i mean. i need to do that for every worksheet in the workbook
View 5 Replies View RelatedFor example: I want to sort through a a bunch of textboxes and refer them to certain cells. I know I can have a string "TextBox" and then the looping number "nbr" and merge them into for instance TextBox1. But I can't figure out how to use this as a command. Like
View 2 Replies View RelatedI have two macros and I would like to assign them both to one button. How to make a connection between these two codes in VBA?
the macro should first sort the columns: A and B and then compare them. Here are two codes that need to be connected:
Sub Sort()
Columns("A:A").Select
Selection.Sort Key1:=Range("A1"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Columns("B:B").Select
Selection.Sort Key1:=Range("B1"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Range("C1").Select
End Sub.................................
When I paste the second code below the "Sort" code, the whole code doesn't work like it should.
I have a file with around 20 tabs. Can I merge all the tabs into just one tab?
View 1 Replies View RelatedI say reluctantly because it seemed easy enough that I should have been able to locate it in the help file of VBA. Which leads me to believe I do not know how to search effectively in VBA, yet/still.
how to merge cells w/ the use of VBA.
Below is my Post and Answer by EE ....
I have two CSV's which are updated on a regular basis.
CSV Master - contains about 23,000 rows at the moment and will continue to grow.
CSV Master - does have a header row
CSV Master has unique (8 digit) numerical ID's in column A so all unique ID's start at "A2"
CSV Master - contains 31 columns ("A through to and including AE") this is a fixed figure.
---- Then I have ---
CSV Extras - generally contains about 200 rows and its unlikely it will ever be more but is contents are different every time it is used.
CSV Extras - does have a header row
CSV Extras has unique (8 digit) numerical ID's in column "A" so all unique ID's start at "A2" and these ID's are a common denominator with both sheets.
CSV Extras - contains 44 columns (last column is AR) which is a fixed figure,
CSV Extras - columns "B up to and including AE" are all intentionally all blank fields.
--- Hope that explains where I am, this is what I need to do ----
I need to be able to look up the ID's (that are in column A in both CSV's) and create a single CSV. In my mind that is a Vlookup of some sort but I can't get it to work
I want to open CSV Master and then, If the ID exists in CSV Extras then fetch all the data in columns "AF to AR" and add it to the CSV Master.