I have two cells with different formulas in them. I try to merge both formulas in a third cell to show different results. Depends on the case. All solutions found in searches made ​​by me does not fit my case. I can not use pivot table and not concatenated. Just a simple merge both formulas in a third cell if possible.
[Code]....
Attached File : example.xlsx‎
Trying to merge two formulas in one cell. I have two cells with different formulas in them. I try to merge both formulas in a third cell to show different results. Depends on the case. All solutions found in searches made ​​by me does not fit my case. I can not use pivot table and not concatenated. Just a simple merge both formulas in a third cell if possible.
Case1 :
VB:
=If(ISERROR(MATCH(A3;FOLHA2!C2:C5;0));"";INDEX(FOLHA2!E2:E5;MATCH(A3;FOLHA2!C2:C5;0)))
join to
VB:
=SE(�.ERRO(CORRESP(A3;Folha2!C2:C5;0));"";�NDICE(Folha2!I2:I5;CORRESP(A3;Folha2!C2:C5;0)))
Case2 :
VB:
=If(ISERROR(MATCH(A3;FOLHA2!C2:C5;0));"";INDEX(FOLHA2!G2:G5;MATCH(A3;FOLHA2!C2:C5;0)))
join to
VB:
=If(ISERROR(MATCH(A3;FOLHA2!C2:C5;0));"";INDEX(FOLHA2!K2:K5;MATCH(A3;FOLHA2!C2:C5;0)))
I have these two formulas in my excel that are being used to "prepare the data from a web query. Basically what I want to do is strip a number such as x.xxxxx to only x.xx and change to dot to a comma so that the end result it will be x,xx.
So far i have two formulas: =MID(A1,10,4) and =SUBSTITUTE(A5,CHAR(46),CHAR(44)) and I want merge these (or find a better solution).
I would like to merge the following formulas into a single cell . . .
=IF(ISNUMBER(MATCH(D61,{"E"},0)),IF(D66>=VLOOKUP(D61,{"E",3.1},2,0),"NM","X"),"")
=IF(ISNUMBER(MATCH(D61,{"S"},0)),IF(D66>=VLOOKUP(D61,{"S",30.1},2,0),"NM","X"),"")
In the new formula, I need to add the following:
If D61="E", then I need the cell shaded in red with black font
If D61="S", then I need the cell shaded in bright yellow with black font
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
I have an index of 80,000 names from an index. Some names appear in multiple volumes and on multiple pages within a volume. While the name is the same, they are different people. The Roman numeral is the volume and the numeric is the page number.
Example of original data: Joe Shmoe V-225, 310 VIII-22, 86, 110
I have separated the data into separate columns. Now I have:
Col 1 Col 2 Col 3 Col 4 Col 5 Col 6
Joe Shmoe V-225 310 VIII-22 86 110
At this point, I want to combine the Roman numeral in Col 2 with Col 3 and 4 and combine the Roman numeral in Col 4 with Col 5 and 6.
There are way too many records for me to manually enter the Roman numeral where missing.
I have data in two columns
Column A has values with names like -
John, Paul, Hena, Kumar, Paul, Hena, John in different rows
Colum B has day values - eg , sun, mon, tue, wed , thu, fri and sat
I want to insert a new column C with formula that returns
1. for every John, concatenate of all the day values adjacent to row of John eg "sunmonfri"
Similarly for all the values in Column A, Column C should reflect the concatenate values of Column B.
Have a data like this
350 352 353 362 364 I want to merge it into one cell
I want to count the merged cell as 1 on the same value regardless how many rows are in merge cells, for example column J5:J798 - i want to count the blank value but some of them were merge i want a result for the merge cell are 1 only not 5 or 6 or more.
View 1 Replies View Relatedcreating a macro in excel that will merge data based on matching id's.
The spread sheet looks something like this
A B C D E F ...
1 12 X 12 2 1 4 ...
2 13 X 17 3 4 4 ...
3 17 X 21 1 1 2 ...
4 21 X 22 2 1 3 ...
.
.
.
I would like to move Cells C2,D2,E2... down to where
the number in column A = the number in Column C
So in this cas C2-End of the sheet where there is data will move down one row, and the same with C3.
Normally i have a row and data as below:
Item
Red
Comfortable
New
Car
1
and i would like to merge them into one cell like this(with spacing between them):
Item Red Comfortable New Car 1
Can VBA do this move?
I have a row of data. I want to merge it all into the first cell and have a line break between each line (from each of the cells).
View 13 Replies View RelatedI have excel data containing in column A "Plot number" which is repeated and other four column is land area and the next column is "Land Owner Name". Now I want to merge same plot no if the land area is same if differ then I want to leave as it is. And another thing I want to do that the all land owner name is merge in a row.
View 8 Replies View RelatedBelow I have this formula in cell A6, in the cells the formula refers to B6 thru O6 contains formula's also. There is text and numbers in the cells. The cells with numbers are formatted as number to 4 decimal places.
The problem is in cell A6 the numbers go to 15 decimal places. I don't know why but I need to keep it to 4 decimal places.
=B6& "" &C6&G6&H6&I6&J6&K6&L6&M6&N6&O6
G01G41X0.0125Y0.0125D(offset#)F0.39
This how cell A6 is after the inputs are in below.
G01G41X0.01249976025Y0.01249976025D(offset#)F0.386021052631579
This is how I need it to be below.
G01G41X0.0125Y0.0125D(offset#)F0.3860
Can anyone figure this out.
Wheather it is a formula or vb code
I want to merge cell text from different column's and row's into a empty cell using VBA and array. e.g (fName, lName, address, City)
I have seen many way's to merge cell text from same row.
I need to merge the contents of an Excel 2007 workbook into a text document, creating a series of paragraphs that look like this: Text text text [contents of cell A1] text text text [contents of cell A1] text. Text text text [contents of cell A2] text text text [contents of cell A2] text. Etc.
Apart from the cell contents, each paragraph will be identical. (I would do this by hand, but there are about 500 paragraphs.). Is there a way to merge the cell contents like that into a text document (Word or whatever)?
I am trying a macro to merge cell without losing the data until I find a next cell with the data - This merging should be pertain only for the column selected. Is it possible to write a macro and preform this activity.
View 1 Replies View RelatedI'm trying to figure out the if conditions for this relatively simple problem. Basically, this is an import from a word document where the table strays onto a new page. I want to try and repair this with a bit of VBA.
This is what it looks like:
1: cell 1 |the content should all be in this cell
2: |but the import sometimes splits it into two
3: cell 2 |
Basically if and only if cell Ax is blank (in this example A2), then I want the rows to merge each cell and repair the table.
I need a macro, that will merge the cells and the data in cell A1 with data in B1, and the data in cell B1 will paste to the end of data in cell A1.
Column A Column B
KL8CB6S90DC505233
3GYT4MEF9DG331323
I need the final result to look like this:
Column A
KL8CB6S90DC505233
3GYT4MEF9DG331323
I need it to complete this for all data in Column A and Column B.
I have a list of emails I need to merge into one cell and separate by commas. It looks like the follwing
A
1. xxx@xx.com
2. xxxx@x.com
3. x@x6.com
I need it to look like
A
1. xxx@xx.com, xxxx@x.com, x@x6.com
I am working on a macros that creates a new row for every data entry. Below is the macros that I have. In the new row, I want for the cells in columns F through O to merge right after creating the row. How do I go about this?
If Sigma = 0 Then
Selection.EntireRow.Insert ' New row for new entries
ActiveCell.Value = "NONE"
ActiveCell.Offset(1, 0).Select
End If
I have a folder named DATAENTRY (consist 90-100 password protected files & it may increase whenever the need arises).
I need to merge A2 to (data in last available row & last available column) of each file in that folder into a single sheet named MERGEDDATA of file named MASTER.XLS.
I got one excellent code to unlock/lock the files automatically without opening the concerned files. This is the Link [url]
& the Code is: ...
I have been using the CONCATENATE function to merge 2 strings together into a single cell. However the problem is, the third concatenated cell depends on the other 2 existing. The idea is I want to take 2 columns of data, and use a formula to merge them, then delete the original 2 data columns so I have a single column with the full data merged.
COL 1 (A3) = First Name
COL 2 (B3) = Last Name
COL 3 (C3) = Full Name (wanted)
So I do =CONCATENATE(A3,B3) and that puts the fullname in C3, but I want to sort of "flatten" C3 so that I have the fullname by itself and I can delete the original cells (A, and B)
I have a report that the name and address was put into one cell. I need to put this into numerous columns so I can do a mail merge.
View 9 Replies View RelatedI have been facing a run time error 1004 ("Cannot change part of a merge cell") when I am to run the following code. I have some merged cells in my excel sheet.
Sub Save2013()Sheets("Invoice").Range("I25:I33").ClearContents
Sheets("Invoice").Range("K25:K33").ClearContents
Sheets("Invoice").Range("K15:M19").ClearContents
Sheets("Invoice").Range("E15:G17").ClearContents
Sheets("String").Range("I58:J58").ClearContents
Sheets("Invoice").Range("T14:V1419").ClearContents
ActiveWorkbook.SaveEnd Sub
I am using the following formula on Excel 2010 in conditional formatting
=$D5=VLOOKUP($B5,'Approved Master OLD'!$B:$BC,3,0)=FALSE
However I am trying to apply this to a whole column but the numbers are not (D5,B5) moving down (to D6,B6), When I use the format painter it is taking too long as I can only merge conditional formatting on one cell at a time and I have 30 colums and 390 rows to apply this formatting to.
I have a workbook that has a lot of worksheets. I want to merge all the worksheet data, skipping blank rows from each worksheet and simply appended the data on one single worksheet. The goals is to just copy the data from worksheet b and append to worksheet a>copy data from worksheet c and append to worksheet a> etc. etc.
View 9 Replies View RelatedI'm trying to use the "clear contents macro" for merge cell, but I keep receiving this "compile error : Expected End Sub" error.
FYI, I have named my merge cells to "myMergedCells"
[Code] .....
Here’s an example of my data:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH
I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH
Does anyone have a VB macro that will copy information from a cell (this will be variable based on criteria) and paste it into the middle of another cell that contains HTML code?
The criteria for the copy/insert/paste is that the information in the cell that is to be copy/inserted must match up with the correct number (part number).
I hope this makes sense. I have attached an example spreadsheet. (Pictures are worth 1000 words. ) Hope someone can help. I checked this site and couldn't find anything that was solved that matched the specifics.