i use this line inside an addin. Application.Calculation = xlCalculationManual. only when I open the XL App, the addin is uploding, so when excution comes to the line, it gives this error: Run Time Error 1004 "Method calculation of object Application Failed". however, when the XL App is already openned, then uploading or unloading the Addin cause no problem
View 2 Replies
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedI have a problem with a macro that runs on a command button. When I click the button, I get a 'Run Time Error 1004, Paste mathod of worksheet class failed' The code is as follows:-
View 3 Replies View RelatedI am having trouble with a macro that is giving me the error Run-Time error 1004 (Paste Method of Worksheet Class Failed)
The code is
Sub getfile5()
Call getfile(2)
Dim ie As Object
Set ie = CreateObject("internetexplorer.application")
Windows("TRANS CHECKS CALENDAR.XLS").Activate
Sheets(2).Select
ActiveSheet.Paste
Range("A1").Select
' ie.Visible = False
Windows("TRANS CHECKS CALENDAR.XLS").Activate
Sheets("Main").Select
Range("A1").Select
End Sub
The macro is timing out on the ActiveSheet.Paste entry...The funny thing is that a number of us can get the macro to work and several of us are getting this error...I am thinking that it is a setting in excel that is causing this...
I encounter a runtime error '1004' if the "Invoices" sheet is not selected when I run this procedure. The last line of the code is one which is highlighted when I debug.
Sub ProcessData()
Dim aiOldRows() As Integer, aiNewRows() As Integer ' Arrays of new/old rows
Dim rngRaw As Range 'Data entry area
Dim rngInvoices As Range 'Invoices range
Dim rngOpenPoint As Range 'Top-left corner of data entry area
Set rngOpenPoint = ThisWorkbook.Worksheets("Data Entry").Range("a3")
Set rngRaw = Range(rngOpenPoint, rngOpenPoint.End(xlDown).End(xlToRight))
FindNew aiOldRows, aiNewRows, rngRaw
InvoiceSequence aiOldRows, rngRaw
Set rngInvoices = Range(ThisWorkbook.Worksheets("Invoices").Range("A2"), _
ThisWorkbook.Worksheets("Invoices").Range("A3").End(xlDown).End(xlToRight))
rngInvoices.Sort Key1:=Range("M2"), Order1:=xlAscending
End Sub
You'll notice that there are two other procedures (FindNew & InvoiceSequence) being called by this procedure. I don't think those have anything to do with the error, but I can provide the code for those if needed. Oh, and one other secondary question. To declare the ranges rngRaw & rngInvoices I pick the top-left cell of the data and then do:.....................
I am trying to execute the following code, but I get a runtime error 1004 (paste special method of range class failed).
Code:
Sub ReviewedStatusReport()
'Define variables
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim ws3 As Worksheet
Dim ws4 As Worksheet
[Code] ........
I'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2()
Dim xls As Excel.Application
Dim oWB As Excel.Workbook
Dim tmp As String
Dim ws As Excel.Worksheet
[code]....
My code is :
Public Const GRAPH_PutData_COL1 = "A"
Public Const GRAPH_PutData_COL2 = "B"
Range(GRAPH_PutData_COL1 & "1").Sort Key1:=Range(GRAPH_PutData_COL2 & "1"), _
Order1:=xlAscending, _
DataOption1:=xlSortTextAsNumbers
it is showing error, "sort method of range class failed error 1004"
Above error only showing when first record is empty...
When I try to run following code, I get error
Run-time error '1004': Select method of Range class failed
Workbooks("Book1").Worsheets("Sheet1").Range("A1").select
however if I split the code like below it works perfectly
Workbooks("Book1").Worsheets("Sheet1").Select
Range("A1").select
When I run this code I get a run time error 1004, copy method of range class failed, I have an autofilter on and it is showing 5 rows, the 5 cells in column A of sheet2 gets copied to sheet1 OK but I get the error?
What do I need to do to fix this?
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed"
have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
I am trying to filter and copy from masterlist to wholesalecertified. The data is actually pasted to WholesaleCertified, however, I got error 1004.
Sub Refresh()
With Application
.ScreenUpdating = False
.DisplayAlerts = False
Sheets("WholesaleCertified").Select
Cells.Select
Selection.ClearContents
Sheets("MasterList").Select................
Method range of object global failed
When i run this ....
I've got an excel spreadsheet that has a search function on it. There is a hidden tab where all the data sits, and a visible tab with a search button where you can enter a reg of a car and it brings up details from the hidden tab.
This works perfectly when I open the excel file that is on my machine. I've put the excel file on the intranet, and to open it you click a link, and when the pop up box comes up, you click 'OPEN', and the file opens up within IE. When I try and search for a reg, I get the following error!
Run-time error '1004':
Method '' of object '_Global' failed
Its really confusing because this didnt used to happen before.. so I cant see why there would be an error with the code because it used to work!
Here is my code.
Sub Button1_Click()
'Sheet module code.
'Find my data in the indicated range, on this sheet!
Dim strMessage$, strTitle$, strDefault$, strShtNm$
Dim lngMyCol&, lngLabelRow&
Dim varRegID As Variant
Dim rngMyData As Range
Dim cell As Object
I have a cet of CommandButtons on sheet 1. The code for these buttons is in the code section of the sheet. A named range is referenced in this code. This named range is on sheet 2. Every time I try to reference this or any named range (from any other sheet), I get this "Run-time error '1004': Method 'Range' of object '_Worksheet' failed"
The last time I had this error I was able to fix it by moving the code to Module1. I tried that here, but it did not work (I can't figure out how to call it from the sheet). CommandButton. Here is the code from the sheet for one of the buttons:
Private Sub TBEnterUp_Click()
iLast = Range("WBDate_DayLast").Value '<<<<<<<
iItem = TBEnter.Value
If iItem = iLast Then
TBEnterUp.Visible = False
Exit Sub
End If
TBEnter.Value = iItem + 1
If iItem > 0 Then TBEnterDown.Visible = True
End Sub
It is a simple number advancer. It is working in the UserForm I took it from. I have included a sample file of the problem. Feel free to look at it and borrow anything in it that you might like.
I am getting the following error: Run-time Error '1004': Copy method of Worksheet class failed. after adding 53 worksheets to a workbook using VBA. I found several posts concerning this error in the forum. However, I did not find any responses that address the root cause or provide a solution.
View 3 Replies View RelatedVery new to VBA and having trouble with a simple macro running in 2003 that copies and pasts to another worksheet. Code as follows:
Private Sub CopyResults_Click()
'Select the filtered data and copy it
Range("A23").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Range("F19").Select
' Open the template and copy in the data
Workbooks.Open Filename:="C:Athens Verification DataTemplatesVerification Template.xls"
Workbooks("Verification Template.xls").Activate
ActiveSheet.Range("A1").Select
ActiveSheet.Paste
ActiveSheet.Range("A1").Select
Application.CutCopyMode = False
End Sub
When I run CopyResults, the sheet is opened and the data copied correctly, but I get a runtime error 1004 past method of worksheet class failed, with the line 'ActiveSheet.Paste' highlighted. Don't get this when I run the same macro in 2000.
I lost 2 days trying to discover the bug in my program, but I coudn't find the right answer.
How can I activate the AutoFilter to show me the rows selected with "YES" ?
This is the code... The compiler stops always at the command Selection.AutoFilter.
I am trying to build a macro which will format the columns of a spreadsheet - basically it inserts some columns, writes formulas and highlights them. Here is a code I have got so far...
When I try to run this I get a run time error 1004 - Method 'Range' of 'Object'_Global' failed. The part of the code
Range("N2:N").FormulaR1C1 = "=(RC[-7]/RC[-2])"
is highlighted in the debugger.
Can anyone tell me why this is happening, also it would be great if you could suggest better ways of writing this code - as I am new to vba programming and most of my macros are built using the recorder and then 'working' on them.
I have an interesting error that only happens when there is one row of data in the worksheet (sheet2 or "Half Payout"). Rows 1 & 2 are headers, row 3 is when the data starts - if any. With either no rows of data or more than one the coding works just fine. Here is the exact error message I'm getting: Run-time error '1004': Method 'Range' of object '_Worksheet' failed.
The following code is supposed to sort the rows of data when opened and then activate the first open cell below B2.
I am encountering this error when I try to run code I have written on my own machine. I am working with all unprotected sheets, and I am running Excel 2007. All of the sheet exist.
Here is my ....
This very simple macro in Personal.xlsb is driving me crazy!
I want to paste a previously selected and copied range at the current position as values. The range will seldom be the same as previously, and the position where it will be posted will be random too.
The code is: ...
I found the following code on your forum, but get the following error:
Run time error '1004'. Autofill method of Range class failed.
The error occurs when the spreadsheet either have 1 row of data completed or no data, can I get code to ignore the autofill when I only have 1 row or no rows completed in various spreadsheets. I have attached a copy of the spreadsheet.
Rows keep changing so I have variables to keep track of various locations.
At this point:
tot_new_place equals 30
tot_new_cnt equals 51
I want to take the data in B30:H30 and copy, auto fill to B51:H51
I am receiving the error on this line of code:
Range("B" & tot_new_place & "").Select
Selection.AutoFill Destination:=Range("R" & tot_new_place & "C2:R" & tot_new_cnt & "C9"), Type:=xlFillDefault
I am getting this error when trying to generate the link report ....
Debug tells me that this makes reference to a sheet is not there , I have checked and it seems to be present
It is an urgent issue as it is preventing me to generate link reports...
I M Getting Run Time Error 1004 Method Range Of Object _ Worksheet Failed
Option Explicit
Private Sub cboPart_AfterUpdate()
'On Error Resume Next
[Code]...
This file has been running just fine....
But now I got this
Run Time error '1004':
PasteSpecial method of Range Class failed.
I have the following macro who now return a runtime error 1004, paste method of worksheet class failed.
I don't know how to change it to make it work.
Sub Paste_TOP()..
Sub ResetMacro()
Range("G26").Select
ActiveCell.FormulaR1C1 = "=Template!RC"
ActiveWorkbook.Sheets("Template").Range("G26:AE86").Copy
ActiveWorkbook.Sheets("Portfolios").Paste
Selection.AutoFill Destination:=Range("G26:AE36"), Type:=xlFillDefault
Range("G26:AE36").Select
Selection.AutoFill Destination:=Range("G26:AE86"), Type:=xlFillDefault
Range("G26:AE86").Select
End Sub
RunTime Error 1004: AutoFill method of range class failed
Takes me to the code and highlights in yellow the line in bold.
i am getting a run time error 1004 Delete method of worksheet class failed,
ws.Delete
Sub Save()
Dim myName As String, myFolder As String, e
Dim fso As Object, temp As String
ThisWorkbook.Save
Set fso = CreateObject("Scripting.FileSystemObject")
myFolder = "C:UsersRecsDocumentsTestVBA & ExcelEmail_Files_Temp" & Year(Date) & "" & Format$(Date, "mmm")
For Each e In Split(myFolder, "")
temp = temp & IIf(temp = "", "", "") & e
If fso.FolderExists(temp) = False Then fso.CreateFolder (temp)
