Very new to VBA and having trouble with a simple macro running in 2003 that copies and pasts to another worksheet. Code as follows:
Private Sub CopyResults_Click() 'Select the filtered data and copy it Range("A23").Select Range(Selection, Selection.End(xlToRight)).Select Range(Selection, Selection.End(xlDown)).Select Selection.Copy Range("F19").Select ' Open the template and copy in the data Workbooks.Open Filename:="C:Athens Verification DataTemplatesVerification Template.xls" Workbooks("Verification Template.xls").Activate ActiveSheet.Range("A1").Select ActiveSheet.Paste ActiveSheet.Range("A1").Select Application.CutCopyMode = False End Sub
When I run CopyResults, the sheet is opened and the data copied correctly, but I get a runtime error 1004 past method of worksheet class failed, with the line 'ActiveSheet.Paste' highlighted. Don't get this when I run the same macro in 2000.
I am getting the following error: Run-time Error '1004': Copy method of Worksheet class failed. after adding 53 worksheets to a workbook using VBA. I found several posts concerning this error in the forum. However, I did not find any responses that address the root cause or provide a solution.
I'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2() Dim xls As Excel.Application Dim oWB As Excel.Workbook Dim tmp As String Dim ws As Excel.Worksheet
When I run this code I get a run time error 1004, copy method of range class failed, I have an autofilter on and it is showing 5 rows, the 5 cells in column A of sheet2 gets copied to sheet1 OK but I get the error?
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed" have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
I found the following code on your forum, but get the following error:
Run time error '1004'. Autofill method of Range class failed.
The error occurs when the spreadsheet either have 1 row of data completed or no data, can I get code to ignore the autofill when I only have 1 row or no rows completed in various spreadsheets. I have attached a copy of the spreadsheet.
I have a userform that allows the user to view, modify or delete individual records (rows) of a worksheet in a workbook. If a particular item in a record is modified, a check occurs to ensure that the values for that item remain unique. All of that works exactly the way I need. The breakdown occurs when the records are then autosorted by a the values in a particular column. After the autosort, another column of values is copied and pasted to a different worksheet within the same workbook. For this to work properly, I must have the userform open along with the worksheet containing the records. If the userform is open with any other worksheet open, I get the following VBA error message "Run-time Error '1004' : Slect method of Range class failed". I need to be able to open the userform with any worksheet active and not experience this error when the autosort, copy/paste occurs. This is the code for the user form, the module for autosort, copy/paste and checking for unue values.
This is the sub in the worksheet with the records
'This checks for unique values Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim LLoop As Integer Dim LTestLoop As Integer Dim Lrows As Integer Dim LRange As String Dim LChangedValue As String Dim LTestValue As String Dim smessage As String 'Test first 7 rows in spreadsheet for uniqueness Lrows = 8 LLoop = 2 'Check first 7 rows in spreadsheet While LLoop <= Lrows.........................
I am using the following code and I'm getting a Run-time error '1004' error. When I reconstruct the macro one line at a time and run the macro between adding each new line - no error. After reconstructing the macro in its entirety, I can run it once with no error. However, if I try to run it again immediately after that, I get the error and I keep getting the error every time I run it from there on. I dont understand how it can work once and then stop working. Here is the full
Sub MoveToRoster() ActiveSheet. Unprotect Dim item As Long Dim myString1 As String Dim myString2 As String Dim myString3 As String item = InputBox("Please Confirm The Row Number Of The Child To Be Moved To The Roster.") myString1 = "c" & item & ":e" & item myString2 = "g" & item & ":n" & item myString3 = "c" & item & ":e" & item & ",g" & item & ":p" & item ..........................
Newcomer to Excel 2007 but long time programmer for Excel 2003. I am having problems with code that I feel should work. Code fails at the Select command with a "Run-time error '1004': Select method of Range class failed:
1.) I have excel 2007 and when I recorded the macro yesterday it worked just fine, but today it's coming up with the box to update values. The macro is set to open up the vendor assignment sheet and do a vlookup against the clerk and then return the information to the original sheet and then copy paste special values. 2.) Today it's also doing the calculating thing in the corner using 2 processors which it has not done before. 3.) Run-time error '1004': PasteSpecial method of Range class failed.
[code]' Keyboard Shortcut: Ctrl+r ' Dim OriginalSheet As Workbook Set OriginalSheet = ActiveWorkbook Columns("B:B").Cut With Columns("A:A") .Insert Shift:=xlToRight End With
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I also want to highlight that i don't have 65536 rows in my sheet. I just have 200 rows. and when this error happens it is on row 150 so firstly i wonder why it is naming the button as Button 65536. I would assume it will start with 1 and go on increments.
What makes excel to fail to select an added button in VBA?
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code: Sub colfrmadd() Range("A1").CurrentRegion.Select colcnt2 = Selection.Columns.Count
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
I have an application I just built last week that seemed to be working fine. It's purpose is simple. It allows the user to select multiple .rtf files from a network drive, and then it loops through them, opens them up one at a time, copies the entire contents into a "temp" sheet in the excel workbook, then copies certain data from the temp tab to the next two columns in the main "data" tab of the worksheet, deletes the temp sheet, and then repeats the process for each selected .rtf file. Finally , it does some formatting of the "data" tab. All in all, it works quite well. Or at least, it DID.
VB: Sub CopyRTFDocToTemp() Dim WordApp As Object Set WordApp = CreateObject("Word.Application") With WordApp
As of last night, we started getting various errors.
"Run-time error '1004': Paste Method of Worksheet class failed" error messages occasionally. The frequency seems to have increased.
We were also getting an error message that reads "Microsoft Excel is waiting for another application to complete an OLE action" error messages.
Then when I stepped through the code, I was getting an error message that read [filename I'm trying to open] "is locked for editing by" [me]. "Do you want to Open a Read Only copy, Create a local copy and merge your changes later, or Receive notification when the original copy is available"
I suspected two issues 1. The macro is not successfully opening the source file before it tries to copy it, so there is nothing to paste into Excel 2. The word file was not closed the LAST time I ran the app, so the file is getting stuck open, and I have no way to manually close it.
Finally, I rebooted the PC, and added code (activedocument.close) to close the word app after copying the contents of the rtf file
Sub CopyRTFDocToTemp() Dim WordApp As Object Set WordApp = CreateObject("Word.Application") With WordApp
I'm considering adding a wait loop to ensure that the app has actually opened a copy of the rtf file, so it has something to copy, but I'm unsure what variable to check with that loop.
My spreadsheet has a grouped graphic that I need to repeat in a variable number of rows. I wrote a macro that copies the grouped graphic from above and pastes and positions it in the newly inserted row.
It works great when I use F8 to step thru, but if I try to actually run the macro, I get an "Paste Method of worksheet class failed." error.
Sub InsertEmployees() Range("B18").Select Selection.EntireRow.Copy Selection.EntireRow.Insert Shift:=xlDown ActiveSheet.Shapes("Group 129").Copy Application.CutCopyMode = False ActiveSheet.Paste End Sub