Msgbox With Custom Buttons
Jun 12, 2008Can I create a messagebox which has unique buttons, "A", "B", "C"...and based on the users click, it performs an action? If so, how would I create this?
View 2 RepliesCan I create a messagebox which has unique buttons, "A", "B", "C"...and based on the users click, it performs an action? If so, how would I create this?
View 2 RepliesI am trying to create a msgprompt but instead of using the default yes or no, I need 3 options, so if the user clicks the first option, it will check a certain box. It will look like this.
"What envelopes do we use?
Choice 1. Branded Choice 2. Unbranded Choice 3. Client Branded
adding custom 16 x 16 buttons to toolbars, which weren't preset images or using the built in deisgner.
Was hoping there may be an add-in giving more variety of buttons or a way to import set images. Very frustrating as there are many microsoft 16x16 bmps / icons that would be ideal but the choice is extremely limited.
I have created 2 toolbar buttons which were attached to a macro that ran the original 'EditTenancy'. I now want to change these to use anew macro 'EditExistingTenancy' but cannot see how to do it as when I right click now I only get a toolbar list.
Do I have to creat 2 new toolbar buttons?
How do I get rid of the non-functioning ones?
Have a spreadsheet wherein I have added some custom controls to the right-click function of the mouse. The buttons and their associated code runs great for all but one user in my office. For that user, the custom buttons do not even appear on his right-click menu. I have looked through his settings to make sure that his security settings are the same as everyone else that uses the spreadsheet, and they are. All of the other modules in the spreadsheet work fine.
Is there some other setting that would control the display of his right-click buttons. Perhaps a windows security setting that I am missing?
The following is a snippet of the code that adds one of the right-click buttons for example. This code is stored in the 'Workbook_SheetBeforeRightClick' event.
With Application. CommandBars(" cell").Controls _
.Add(Type:=msoControlButton, Before:=1, temporary:=True)
.Caption = "Create Panel Hyperlink"
.OnAction = "CreateHyperlink"
.Tag = "brccm"
.FaceId = 2169
End With
I have created a custom Command Bar called "My New Bar"
How can I step through each button in that bar to read the assigned macro names or the Caption names
I have a workbook that creates three temporary menu buttons when I open it. These work fine until I try and open more then 1 workbook at a time. This creates duplicate menu buttons (3 times the number of workbooks that I open).
I call up the procedure when each workbook is opened using this code in the "ThisWorkbook" code area: ....
is there a way to cause my custom menu items to grey out like the built-in ones, depending on the current selection or when the status of the active worksheet/workbook changes (e.g. when the book is protected to disallow certain actions)?
Obviously I can trap any problems once the associated VBA is invoked, but it'd be more professional if I could just prevent that from happening in the first place.
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
I'm trying to make a converter between about 8 various types of values. These are not units like Km or miles or something like that, but rather numbers that represent a specific "hardness value" on a variety of scales (to name a few: HRC, HRA, K)
What I've been doing so far is plotting the two types against eachother and then getting the best trendline I can so that I can use that formula to convert between the two with relative certainty. (for example, when plotting HV vs HRC my fourth order polynomial trendline with an Rsquared of 1 is y=0.0001x4 - 0.0188x3 + 1.0768x2 - 20.709x + 350.69)
My questions comes up where I was hoping to make a window or box of some sort allowing the user to input a numeric value, then selecting the Input units and the hopeful output calculated units, and have the box spit back to the user the conversion.
I want to be able to create a range of VBA userforms to quickly perform long tedious tasks. I want these userforms to be accessed from a nice tidy toolbar.
I have done this and it looks nice and works well. What I would like to be able to do is have my custom toolbar of userform controlled functions be transferable so that if someone else wants my toolbar and attached functions they can install it easily much the same way you can do with an add in.
Is this sort of thing possible or does it require them to manually install all my userforms, modules and toolbar? If it is possible what sort of things should I be looking at?
i have been trying to add msgbox to show that if textbox1 and textbox3 are empty than show "please enter i.d or lockern no but if textbox3 is true than run the code or textbox1 is true than run the code.
View 1 Replies View RelatedI am currently setting up a ID/Password function on my spreadsheet. On the main page is the login boxes and an Ok button. When the Ok button is pressed, I have a formula that checks the user ID and Password and if correct, it types correct. Otherwise it types incorrect. This is using;
View 2 Replies View RelatedIn one of my spreadsheets users can see the active period on multiple worksheets
All have cell references to the 1st worksheet (cell B5). I would like 2 things:
1. If users change one of the reference cells on the other worksheets I would like a msgbox to appear
2. After clicking the msgbox away I would like the "old" cell contents (the referenece) to be restored.
I want to change this so there is a MsgBox vbYesNo button below where it tells you what cells are found & says:
"Is this what your searching for?" If yes Box closes. If No Continues Search.
How would I go about adding it to the code below?
If range K1:K1000 has "Yes" in there, to display a msgbox
But if there is 300 Yes's, how do i get it to do just one msg box and not 300
I would like it on a sheet Worksheet_Deactivate
* note K1:K1000 are drop downs with "Yes" "No" "Potentially" options
Hi, Please could someone help with the following code. I have 2 sheets 'sheet 1' and 'sheet 2'(hidden). Sheet 1 has a control button that takes you straight to sheet 2, however what I wish to achieve is that before sheet 2 is visible a message box appears if a condition is not met. Something like, if sheet 1 R29 is less than 5000 then msg box appears (I would need about 4 lines in the msg box), if ok'd then sheet 2 appears. If the condition is met i.e sheet 1 R29 = or is greater than 5000 then the msg box does not appear and takes the user to sheet 2.
View 8 Replies View RelatedIs it possible to modify and code not to have the OK button. I need to to be information process only. I have a long macro i need to user to be aware where in the macro run we are. I wanted to use this code... but i do not want to click the OK button i need it to just show that that step is completed etc...
MsgBox "October Finished", vbInformation
I am trying to have a msgbox come up if there is a path found it will pop up a msgbox for a few seconds then go away. Im trying to avoid the user from having to select anything just simpley telling them the connection is there then go away on its on. The code below is what Im currently using.
Code:
If Dir("H:") = "" Then
MsgBox "Error: Drive, path or file not found"
Else
MsgBox "OK: Drive, path or file found"
End If
I would like to add a MsgBox letting the user know how many days are left before the Trial Period is up.
Code:
Private Sub Workbook_Open()
Dim StartTime#, CurrentTime#
'*****************************************
'SET YOUR OWN TRIAL PERIOD BELOW
'Integers (1, 2, 3,...etc) = number of days use
'1/24 = 1Hr, 1/48 = 30Mins, 1/144 = 10Mins use
Const TrialPeriod# = 5 '< 5 days trial
'set your own obscure path and file-name
[Code] ..........
I was thinking of:
Code:
MsgBox "You have X number of days until you Trial Period expires."
But, I don't know how to code the part in Red to register a Count Down from the first day opened to the next.
It may be opened more then once per day. I just nedd a message on day 2nd - 4th day.
If opened on the 5th day, the rest of the code executes, closing the Workbook.
I have several material takeoff sheets and one material SummarySheet in my workbook.
Each material takeoff sheet has a subtotal cell at the bottom of the sheet. The subtotals are added together and the total sum is displayed in a cell on the SummarySheet. At least that is how it is supposed to work. Excel or somebody else arbitrarily changed the cell reference in the SummarySheet formula to call up the cell one row above the subtotal cell on the material takeoff sheets. This little action resulted in a loss of $674,000 and may eventually result in my unemployment. Meanwhile I am sitting here putting out fires.
This is what I would like to do: Place a formula on the SummarySheet or add a Macro that will trigger a warning message box if the total on the SummarySheet is not equal to the sum of the subtotals on the material takeoff sheets. Also would like to have the message box animated or brightly colored.
If(PlateCostsTotals+AppurtenancesCostsTotals+StructuralCostsTotals+MiscellaneousCostsTotalsSummaryCostsTotal MsgBox “Hey, Don’t You Know How to Add”) or an alternate formula that works.
I've created a routine that starts with a message box saying the following:
"Please Confirm 'DTmacTest.xls' is the ONLY open Excel workbook"
So I have an "OK" button and a "Cancel" button.
but no matter which one I press, it runs the routine.
How do I assign the cancel button to stop the routine when it's pressed?
I have this
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("A1") >= 2 Then MsgBox "Check: " & Me.Name, 64
End Sub
but I need to get a msgbox when the value of A1 is >= 2, then when the value is >= 4, then >=6, then >=8 , ............
the value of A1 is going to be increasing by decimal points as I enter data.
I would like to make a message prompt with additional information that pops up whenever a user selects certain text ("Client Data Error") from a pull down menu. The cells are in one column.
I've never used VBA before so if someone could walk me through any preliminary coding steps ie any introductory texts or inserts into the actual spreadsheet ....
can you add a clickable hyperlink in a msgbox?
View 9 Replies View RelatedI have a workbook which pulls in the latest row of data from another workbook. At the moment, the original data workbook needs to be open for the one which pulls in the data to work, otherwise I get a #VALUE! in all the relevent cells. What I'd like to do is have a pop-up MsgBox which comes up if it finds the #VALUE! error in cell A9, whilst if the original workbook is open and so no error is displayed, no MsgBox will appear
View 8 Replies View RelatedI have a macro which is going over a list of values and (only if necessary!) change their values or add new items.
I would like to get, at the end of the process a message box with a list of changes for example:
Account 11111 changed to 22222
Account 11112 was added.....
How can I create a return / new line in a MsgBox? I'd seen documentation to use the @ symbol to trigger a new line, but that doesn't seem to do anything.
View 3 Replies View Relatedi have this code to disable X in a MsgBox.......
MsgBox "Closing from X is Disabled", 20, "Action"
Is there another way that the MsgBox shows OK only botton without showing yes/no botton