I need to create a formula that counts the number of times that an age range appears within a column. In column G, there is a list of ages based on a demographic collection. The ages range from 13 to 50+. I want to designate another cell to count the number of times the characters between 13 and 18 occur within that column. I have =COUNTIF(G8:G20,"13") How do I add "14", "15", "16", "17", and "18"?
View 2 RepliesI have this formula
= COUNTIF(AT6:AY6,"F")+COUNTIF(AT6:AY6,"P")+COUNTIF(AT6:AY6,"M")+COUNTIF(AT6:AY6,"D")
that returns the number 2 (which is correct). However, if I precede it with
AZ6/COUNTIF(AT6:AY6,"F")+COUNTIF(AT6:AY6,"P")+COUNTIF(AT6:AY6,"M")+COUNTIF(AT6:AY6,"D")
it returns a DIV/0 error, even though AZ6 has a value of 24.
Surely 24/2 would return a value of 12? NB AZ6 cell value is derived from the result of a formula.
I've attached a sample of the data I'm using.
I have two spreadsheets (the samples for which I have shown side by side in Sheet 1 of the attached file).
Spreadsheet 1 is about 30,000 rows and too large for me to change the formatting and structure.
Spreadsheet 2 is the output I need and the format is required by other stakeholders.
In spreadsheet 1 I want to sum quantity in stock for Type 1, Type 2 and Type 3 for each product and allocate it to spreadsheet 2 according to the month in which the product expires. For example, there will be a total of 92 units of product 413302 which will expire in Nov, 2014. Therefore I want 92 to be placed in cell N6 of Spreadsheet 2.
Unfortunately the product number is not unique - there are multiple sub products in spreadsheet 1 but they all have the same quantities of stock. The sub products are referenced in other parts of the report so I can't consolidate by Product Number. This also prevents me from using the SUMIFS function as it will duplicate the number found in the sub products.
What I need, perhaps in a combination of functions, is to find the first instance of product 413302 in Spreadsheet 1 that is expiring in Nov 14, sum the product types and give the result in cell N6 of Spreadsheet 2.
I want to put a formula in a spread sheet that if block f5 is equal to or higher than 20% of block b4 then block d3 * .0 if less than then * by .0078
View 14 Replies View Relatedi want to use Countif() when 3 ceritera are true
ceritera
--------
1) Branch Name
2) Status
3) Login Date
can this be done by any mean
what I'm trying to do is to make a logbook for a machining center. Each part has an op10 and an op20, essentially front and back. And each part number falls into the category of OS or FS. I've used AND logic to make tables in hidden columns to be used by a countif statement to determine my totals. I.e. to determine if a scroll is completed, op20 has a a value of 1 AND column C is "OS".
I use
=IF(AND(A9=1;C9="OS");1;" ")
Then I countif criteria is 1 in the column i created with that statement.
That works just fine. Now what I want to do is to be able to create daily totals of OS and FS by simply modifying a variable date in a formula. So I'd like to essentially say: Countif Column C =OS and Corresponding column D = 1, and corresponding Shift date = 10.02.12(date to be variable). I'm at a wall here. Is there any way to do this somewhat simply?
I'm trying to count multiple criteria from a second page in a work book, all the formulas i've looked up and tried do not seem to work... here's the formulas i've tried. DKOBULAR is the name of the 2nd page. D is the column used for the different resolves.
=COUNTIF(DKOBULAR!D:D="resolveA")+COUNTIF(DKOBULAR!D:D="resolveB")+COUNTIF(DKOBULAR!D:D="resolveC")+ COUNTIF(DKOBULAR!D:D="resolveD")
=COUNT(IF(DKOBULAR!D:D="resolveA",IF(DKOBULAR!D:D="resolveB",IF(DKOBULAR!D:D="resolveC",IF(DKOBULAR! D:D="resolveD")))))
In Excel 2003, I need a countif to check for 2 criteria: (1) the left function looking for the value "Territory" in column A and (2) value > 0 in column G. I only want to count the rows where both the criteria are met. I have tried different combinations of countif including "and" in the formula, but I cannot get it to work. What is the proper syntax?
View 9 Replies View RelatedI need to create a formula which counts the number of times a username appears in column X based on a given value in Column Y. This data will not be static - will need to be refreshed regularly. Countif does not support multiple criteria - what is the best way to create this formula?
View 2 Replies View RelatedI need a formula to count cells E7:E500 that say "Submitted" but only if cells R7:R500 say "PPB".
My original formula below is counting all cells except for the ones that say "PPB"
=COUNT(IF(E7:E500="Submitted",IF(R7:R50="PPB",'E7:E500)))
I haven't been this deep into excel before. The deeper I look, the more potential I recognize, the more amazed I get. That being said, I have come to a tough count issue. Let me attempt to explain as precisely as possible.
My current worksheet is large but I am only particularly concerned with two columns of information (Regions) and (Days). The logic I am attempting is something along the lines of Count If Region = East, or West, and Days is greater than 0, less than 60.
I am open to any and all suggestions on how to tackle this situation. I have been able to achieve similar counts by using pivot tables but the dynamic nature of these two columns presents some difficulties that my “new user” mind has been unable to work through.
I have a bunch of cells that i want to count in a table based on 2 criteria. The first would be checking whether or not it matches a certain text which i can do. Now i have a column for "Completed Date" and "Deadline Date". Each deadline date is different. I know i need some sort of array function in there to compare all the completed dates vs deadline dates but i just can't think of it. This will be the second criteria.
View 3 Replies View Related=COUNTIF(A$2:T$1001,V2 & W2 & X2 & Y2)
I want to copy and paste this formula down column Z.
I want to count or add 1, only when a row of 20 cells (A to T) contains all 4 criteria in V W X Y.
I'm a marketer trying to find all calls within a week that are longer than 300 seconds. I'd prefer not to use a pivot table because of client issues.
=COUNTIF(A:A,1)-COUNTIF(F:F,"
I need to add all cells within multiple ranges where the characters "A", "S" and "D" occur.
=SUMPRODUCT(COUNTIF(INDIRECT({"C22:C25","C28:C32"}),{"A","S","D"}))
I need to count rows that meet 2 criteria.
I have seen this help page
http://www.ozgrid.com/Excel/count-if.htm
but that counts rows with "criteria 1" OR "criteria 2"...
I need to count rows that fulfill "criteria 1" AND "criteria 2"
ie - count the rows that have todays date AND a cell that says "COMPLETE"
ideally it would be as easy as "=countif(A:F,"today()","COMPLETE") but that doesn't work... any way around this???
How many tickets are created and fixed by a user for a certain period. See below. I've tried countif but it doesn't seem to be working for many criteria.
Start Date
11/1/2012
End Date
11/31/2012
Assigned To
Created
Fixed
[Code] .....
Can countif function work on multiple criteria to look on?
this are the criteria.
SA SL 1.0SA SL 0.5SA VL 1.0SA VL 0.5SA SLWOP 1.0SA SLWOP 0.5SA VLWOP 1.0SA VLWOP 0.5SUSPRD
How to use countif in Excel 2003, for multiple range and criteria ? Can 'Nested ifs' be used? If so, a sample of such ifs
View 3 Replies View RelatedI want to be able to look at two columns and set a criteria to count. I want to look at column A and if its blank then look at column B and if it has a value of more than 0 then count.
A B
1 1.00
2 Yes 4.78
3
4 5.00
5 Yes 4.89
6 11.99
So this example would count 3
I'm trying to write this but it returns a 0 when I know there are 3 records that match this criteria: =SUMPRODUCT(('Invoice-Detail'!J2:J50="NewJob_Post.NET")*('Invoice-Detail'!H2:H50="KY_*")). I think the problem is in the wildcard character. I don't know if I should be using COUNTIF or SUMPRODUCT or something else?
View 3 Replies View RelatedThe format for combining COUNTIF and AND in a
single function - I can't seem to get the format right.
What I want to do is COUNTIF range 'Issued_by' = A8 AND range
'Period_all' = 1
I want my IF function to populate two cells with two values if argument for IF function is found TRUE. Is it possible?
IF(logical_test, [value_if_true], [value_if_false])
value_if_true = return multiple values in mutiple cells (for example put number 8 in cell A2 and number 10 in cell A3 if function is TRUE)
How would I do that? I tried putting IF(logical_test, (A2="8",A3="10"), [value_if_false]) but it is not possbile...
SUMIF and SUMIFS formula, where in I want to set criteria in the formula as greater than or less than or equal to value derived from another formula. I am inserting the following formula but excel is not allowing me to enter the formula.
=SUMIFS($C$22:$C$30,$E$22:$E$30,>=LEFT(L21,3),$E$22:$E$30,<=RIGHT(L21,3),$A$22:$A$30,G22)
Cell A1 is HEAT_CODE
Cell A2 is W5H
In cell
=DMIN(Database,"Cost",A1:A2) return the proper value
I need something like the following so I can use fill down.
=DMIN(Database,"Cost","HEAT_CODE"=A2)
the above returns #VALUE! error.
I use Excel 2003 and I have the following problem:
I have 3 columns,
A containing a list of employees (MICHAEL, BOB, MIKE, etc.)
B containing their work starting hour (8.00, 8.30, 9.00, etc.)
C containing the possible employee absence reason (ILLNESS, HOLIDAY, INJURY, etc.)
I would like to write a formula that counts the number of employees who have a work starting hour within 7.00 and are not absent. A possible table is this one:
NAME START ABSENCE
MICHAEL 6.30
BOB 8.30
MIKE 9.00 HOLIDAY
BRIAN 7.00
TOM 6.30 ILLNESS
The formula I'm looking for should calculate "2" (because MICHAEL and BRIAN are the only 2 employees starting work hour within 7.00 and not absent). As I have thought it could be useful, in another worksheet I have inserted: in A column the list of all the starting work hours: 0.00 (A2), 0.30 (A3), 1.00 (A4), 1.30 (A5), ... 7.00 (A16), 7.30 (A17), ... 23.30 (A49).
in B column the list of all the absence reasons: ILLNESS (B2), HOLIDAY (B3), INJURY (B4). I have defined 2 names, the first called EARLY_MORNING (that I have associated to the range from 0.00 to 7.00 of work starting hours column, that is A2:A16), the second called ABSENCE_REASON (that I have associated to the range (B2:B4) of absence reasons' column). What kind of formula can I write to obtain what I want (using the 2 names EARLY_MORNING and ABSENCE_REASONS defined in the other worksheet)?
I have a spreadsheet with a list of months numbers and average turnarounds. Each row represents a different factor, so there are multiple rows for each month.
eg
Month Turnaround Time
10 5.2
10 6.7
11 1.1
9 8.3
11 5.4
10 6.1
etc
What I am after is something that will count the number of instances where the turnaround time is above a certain limit (eg 6.0) for each month.
What vba function can I use that checks criteria much like SUMIF or COUNTIF uses? In other words, say you want to write COUNTIF that only includes visible cells...
Public Function CountVIf(rng As range, criteria As String)
Dim cell As range, cmd As String
For Each cell In rng
If cell.RowHeight <> 0 And cell.ColumnWidth <> 0 Then
cmd = "COUNTIF(" & cell.Address & ",""" & criteria & """)"
CountVIf = CountVIf + Evaluate(cmd)
End If
Next cell
End Function
How can I do this without having to rely on Evaluate("COUNTIF...."?
What I need to do is count the number of “Cs” in a column based on a date in another column but in the same row. I have tried something similar to this: COUNTIF($C$1:$C$20,"=today()")+COUNTIF($E$1:$E$20,"=complete") but is does not work. If the date in the column is less than or equal to a date specified in a cell in another worksheet, I want it to count the C in the row (if there is one).
View 9 Replies View RelatedIn Row 3, starting at cell C3, I have a list of Stores in the format Store A (Town 1), Store A (Town 2), Store B (Town 1) etc
In Rows C4 to CA7 I have 1 or -1
I want to count the number of instances of 1 for Store A
I have tried the following formula, which is returning 0
{=SUM((C3:CA3="Store A *")*(C4:CA7=1))}