Name Selection In A Userform - To Create A Signing In Sheet?
Jul 14, 2014
I am creating a yearly rota that will produce a signing in sheet on a day and night basis. Im using a userform to pick the... Department, Operators name, Time In & Time Out.
The Problem I have is that the ComboBox in my UserForm for selecting the operators name shows every operator in the rota, where as I would like the Combobox in my user form to only show the operators that are on shift that day/night. To reduce the chance of selecting an operator that isnt even on shift that day.
I would also like it to subtract the names after the have been selected. to reduce the chance of entering the same name twice in the same sheet.
I am trying to create a drop down box that pulls its selection from another sheet in the workbook and I'm not sure how to go about doing it. I figure VBA must have some way of doing it but I am not sure how the coding would go. I've attached a very basic example of what I am trying to accomplish.
I have been searching this forum regarding digitally signing macros. I see that it looks like you are using them in an office setting.
I write a lot of macros that we distribute around the office and the "Enable Macros" prompts confuses and/or annoys many users.
I see that to get an "Authentic Certification" requires effort and money, but it appears from your e-mails that you are successfully using the SelfCert. I have a few questions regarding this:
1. Can you use this in an office setting? It appeared to me that it would only work for the signer on his computer. Does that mean everyone would need to sign and save a copy of the file for themselves?
2. In one of the posts it mentions that it self-signing might not work if the macro creates or deletes files. Is that true? Many of my macros create new worksheets.
I have a table of data which moves up and down my report depending on user input changes to the source data.
I have written some VBA code to generate a chart based on this table of data. I have managed to create a basic chart from this table. However I need to change the series (on the chart) from rows to columns so that it is displayed correctly. For this I need to have the cell references within the code belonging to the actual chart.
If I was writing the code for the chart with an absolute reference I would write it as:
1. I have a userform I created that has a text box that pulls it's data from one of the spreadsheets tab. The userform also has 5 buttons I shall call Tab1, Tab2, Tab3, Done, Cancel. 2. The first thing a user will do is make a selection from the text box. 3. The User will then select one of the "Tab" buttons.
Below is my code. What happens is that no matter what button I click (Tab1, Tab2, Tab3) it ends up on Tab3 because it is the last transfersheet line of the done_click() sub routine. How do I get it to stay on the Tab I select?
+++++ Private Sub cancel_Click() Unload UserForm End Sub +++++
Private Sub done_Click() Dim transferworksheet As Worksheet Set transferworksheet = Worksheets("Tab1") transferworksheet.Cells(5, 7).Value = Me.ListBox1.Value
I am trying to create 2 drop-down lists (based on named ranges), where the contents of the second selection change based on the first selection. On one sheet, I have a list of equipment that is quite long, but is broken up by categories. I have named ranges for all the category names, and the equipment in each category. On the other sheet (user side) I made the first drop down the list of categories, and would like the 2nd drop down to be the pieces of equipment that correspond with the chosen category. I have tried using data validation and nesting IF formulas, but it only works for the first 4-5 categories, bc my formula is longer than the Source field allows in Data Validation. Any other way I can make this work? Can I use a macro for this? If so, how to write it as this would be my first macro
I have a userform with a dropdown box, a refedit and an accept button.
The user selects an item from the drop down box and then selects where on the sheet they want to place the item. I am wondering how to move the selected box in my Userform once the user has selected an entry from the drop down list. This is so that they dont actually have to click in the refedit box after selecting from the drop down box.
I'd like to use a calender ifor this. To start, I did the following:
From Control Toolbox - More Controls - I selected: Miscrosoft MonthView Control 6.0 (SP4) This placed a calendar on my worksheet.
What I would like to do is the following
1. Calender Display 1a. When a next button is selected in my wizard it moves to a new form. (Got this done) 1b. The Userform has buttons: "Select Start Date", "Next", and "Cancel" (Got this done) 1c. When user selects date button, this triggers the 'Calender' to display. Currently, ithe calender is still showing, so I first need to hide it. It seems to be called "MonthView1" and has the following in the formula bar when Control Toolbox is in edit mode: =EMBED("MSComCtl2.MonthView.2","")
2. Date selection 2a. User selects a date on the calender. (Easy if calender is displayed) 2b. User selects next button in User Form. (Triggers what follows....)
3. Variable assigned from selection 3a. 'Next' hides the calendar. 3b. 'Next' calls a marco that assigns the date selected from calender to a date variable. sDate = ???.Value where ???=selected value from calender 3c. 'Next' hides current form and moves on to next in wizard sequence (I can do this)
I have been trying to create a "Search" or "Look Up" form for my database. ( Attached file - "Test - Form").
I have been given a lot of help/ideas from this forum with which I managed to get to the stage where I could select the criteria i wanted to search by using a combobox and textbox in the userform. On hitting the "Find" button it shows all the results in the listbox.
The trouble started when I tried to display the listbox selection on the labels at the bottom of the userform. As the listbox is small and cant show all the fields properly, I need to display them in labels once user selects a particular record from listbox.
I managed to find some examples of this from this forum. (file attached "Action Log"). As I am not an Excel/ VBA expert, I have missed something and am not able to make it work.
I have a large set of data that I need to use for data validation in drop down lists. The data is arranged in 4 columns and entries within each column may repeat numerous times. The four columns are as this..
Category Subcategory 1 Subcategory2 Subcategory3
The first data validation will come from the first column. Once this is chosen the second drop down should populate with the subcategory that correspond to that category stored in column 2. once that is chosen the thrid data validation should populate with the corresponding subcategory from column three etc.. This is a small sample of the data in the columns.
I am working on a spreadsheet for a client. I am using Excel 2007 and she is using Excel 2000. I have created a emplate for her to enter survey data into. Using the following code, I have created combo boxes for the drop-down menus so the client can tab from one cell to the next while entering data:
Option Explicit Private Sub TempCombo_KeyDown(ByVal _ KeyCode As MSForms.ReturnInteger, _ ByVal Shift As Integer) 'Hide combo box and move to next cell on Enter and Tab Select Case KeyCode Case 9 ActiveCell.Offset(0, 1).Activate Case 13 ActiveCell.Offset(1, 0).Activate Case Else 'do nothing End Select End Sub.....................
My data resides in a workbook in sheet2 and sheet3. I have 4 comboboxs refering to different columns in sheet2 and sheet3. Basically when the user selects all the four comboboxs, the criteria should be satisfied and the results in terms of rows matching those values should be shown in the textboxs below.
Each three of the textboxs refers to individual columns in sheet2 and sheet3. All I want to do is simple search criteria on both sheet 2 and sheet3 and put the results in textboxs.
I have populated my comboboxs but dont know the macro to do the search results .
my userform,which has 4 comboboxs
combobox1 = sheet2 column C combobox2 = sheet2 column BL combobox3 = sheet3 column K combobox1 = sheet3 column F
The results which satisfy the above 4 criteria should come from ,when user presses POP UP DETAILS BUTTON,
textbox1= sheet3 column C textbox2= sheet3 column N textbox3= sheet2 column T
Actually I have many records which satisfy the above 4 criteria, dont know how to display them whether in textbox or any another method.
I have created a User Form that has been tested and is working properly. Now my last step is to do the following:
I would like to Display the User Form (coded as CommRM) if in Column C (can be any cell as it is a large worksheet) someone selects "Retail News" from the drop down option.
The code that I have been able to create so far is below. The problem is that when I select Retail News from a drop down in Column C the user form does not appear.
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Range (C14, C3333).Text = "Retail News" Then Call UserForm_Initialize End Sub Private Sub UserForm_Initialize() Load CommRM CommRM.Show End Sub
I have 3 name range in a control sheet ("Control")
Namerange Cat1, Cat2, Cat3. All of the name range are different. I am trying to cut down on my Userform that have each a userform with combobox selection.
Frmcat1, frmcat2 frmcat3.
I need to simplify my life. I need that if the user selects anything between F5:F20 to generate the userform and select range Cat1. If the user Select G5:G20 then to generate Cat2 and so on...
So on userform Initialize look if the user is in Column F, is yes then Cat1. If user in Col. G then Cat2 and final if user is in Col H to have Cat3 generate in the combobox.
I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
I have a list of 10 shops as a list box named lstitems i need the user to click one of the 10 shops and when they click the selected shop it tells the name they selected. then i require a Quit button that transfers the selected Shop to cell D3 & then closes the userform, but if they do not pick a shop it will ask them to pick one before it closes. so they must select or it will not close.
What am I missing here? I followed http://www.fontstuff.com/vba/vbatut07.htm and I have this code but nothing happens when I click on 'M6'.
Private Sub Calendar1_Click() ActiveCell.Value = Calendar1.Value Unload Me End Sub
Private Sub cmdClose_Click() Unload Me End Sub
Private Sub UserForm_Initialize() If IsDate(ActiveCell.Value) Then Calendar1.Value = DateValue(ActiveCell.Value) Else Calendar1.Value = Date...............
I have an excel workbook with two sheets. Sheet 1 has a list of people names, rank, address, and phone numbers. Sheet 2 has boxes where a user can select a last name from all last names in sheet1. What I want to happen after the user selects the last name in sheet 2 is for it to automatically fill in the rest of the data (ie Rank, First Name, Address, city, Home phone number, Cell Phone number). What do I need to do in order for this to work?. Attached is a very small example of my much larger project.
I want to write a macro to add a surface chart for a Data Range which includes 6000 data points. But the series selected for the chart don't cover all Data Ranges, only part of them.
Public Sub AddChart2(LastRow As Integer, LastCol As Integer)
Dim cht As ChartObject, currentSheet As Worksheet Dim rng As Range, newRow As Range, srcRange As Range Dim colIdx As Integer
I am new in Excel VBA and working on developing a form for Quarterly Reporting. My userform (Quarterly Report) contains controls such as combobox (one of them). I am trying to have another Userform (Risk and Mitigation) to pop-up when a specific item is selected.
Example: With cboRiskScale .AddItem "High" .AddItem "Moderate" .AddItem "Low" End with cboRiskScale.Value = ""
I am looking for the code where I will be able to have the "Risk and Mitigation" userform pop-up for user input when the "High" is selected.
I am working with DatePicker calendar. I have two userform with date entries. In one userform I will have 2 textbox to enter dates. In the other one I will have 4 dates to enter. I used to have Excel 2007 with Calendar Control and used to work fine but had to make multiple calendar to control individual Textbox in multiple Userforms.
I am looking for a way to, If a userform is selected to trigger only the textbox name that is within that userform. If I add more entries the code adds automatically the date from the previous userform in the next one.
[Code].....
I was thinking that this would work but it still adds the date to my frmdashboard userform if I am in my frmdata userform.
Is there a way to trigger only the userform that I am currently in?
Using Excel 2013.
Note: I also have a "Clear All" VB Code that will delete every entry in my userform on Initiate but I am looking to not go this path.
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code: Sub cmbLnOffNum_Change() Dim idx As Long Dim LnOffRow As Long
This is weird - if you delete a sheet that contained a control then
a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End b. public variables lose their value
These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
i want to create one user form like shown in this picture below. right side 3 options need to input form the user and clicking on the button get option chain, it gets the data from www and fills all the columns frm expiry to optn int..
