I have a userform with a dropdown box, a refedit and an accept button.
The user selects an item from the drop down box and then selects where on the sheet they want to place the item. I am wondering how to move the selected box in my Userform once the user has selected an entry from the drop down list. This is so that they dont actually have to click in the refedit box after selecting from the drop down box.
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
I searched and found a couple of different active.sheet codes but could not get it to work. What I want to do is move the worksheet tab I create in the code below all the way to the end (right) of the worksheet tabs already in my workbook.
View 2 Replies View RelatedI have a workbook given to me by a coworker who password protected it. I generally use the tab button to navigate when adding information to cells with the number pad. I am unable to use tab when navigating his sheet until the protection is removed. How can I fix this so that I can tab through it when protected?
View 1 Replies View RelatedWhat is the command to move the active cell? For example, suppose C15 is the active cell, and I want a macro to move the active cell one to the right. Or maybe 3 to the right, and one down. The deal is, I'd like to be able to make the active cell move in a fixed pattern relative to the cell that is already active (before the macro is run), rather than moving to a final fixed destination (which would be something that even I could figure out). In other words, if I select R20, and run the macro (or whatever other mechanism you guys come up with), then R21 will be selected; likewise, I can click G12, run the macro, and G13 will be selected.
View 9 Replies View RelatedFor a specific equation to work I need to know the distance whenever the acceleration is maximum.
The last part is a piece of cake, using MAX I get the desired results.
However, returning the distance is difficult.
What I'd like to do is return the value of the cell to the right of the maximum acceleration.
Using
=ADDRESS(MATCH(MAX(K2:K754);K2:K754;0);COLUMN(K2:K754))
I got the address of MAX, but that's about as far as I get.
I try find function or create macro witch makes move in to the specified column after clicking on button. But this move will be in the same row, where i was last active.
View 2 Replies View RelatedI would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time.
Example:
Sheet 1 – is current jobs and sheet 2 is old jobs.
My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2.
I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
I am using a form which has 3 text boxes and a list box. How do I copy the selection of a list box to the text box based on my active text box. So, if I was in text box1, and I click a selection in listbox1, it copies that selection to textbox 1, etc.
View 4 Replies View RelatedI need some sort of code to check through a selection of cells in a column and make those cells "zero" whose value is equal to the first cell in the selection. e.g., let's say I have a key value entered in cell e6 = "2.99".
E6 F6 G6 H6 I6 J6
2.99 5.25 2.99 2.00 2.99 5.00
So the macro should be able to check the value in cell E6 (i.e. = 2.99) against values in cells from F6: J6 and any cell having the same value as cell E6 (2.99) should be made = 0. So, in the above example cells G6 & I6 will have "0" value after the code has been executed. I have close to 50 rows going down starting from cell E6. For example, E7 has a value which has to be checked against the range starting from F7 to J7 and so on and so forth.
1st post so hope that title isn't too vague.
Using VBA, I have a macro that will find a column based on a week number and add in a new column.
It will then offset the ActiveCell down one.
I now need the macro to SUM all values in that row to the left of the ActiveCell.
My original thought was to use:
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlToLeft)).Select
Unfortunately, there are gaps in the data field, blank cells that should count as zero value.
How can I highlight all cells to the left, from whichever column the active cell is in, through to column B?
I have a spreadsheet with data organized into columns in sets of two - the first column is an X value (Pixel number) and the second column is the Y value (pixel density). I'm trying to make a macro that will select the first set of columns, chart it, move the chart to the next sheet, then select the next two columns of data, chart them and move the chart to the next sheet etc. I've gotten as far as having it make the chart and move it, but I can't seem to make it select the next set of columns - I've been trying different things for a couple days now.
Code:
I have a excel file to keep track of sales pipeline. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows once a task is completed and can be moved to another sheet. In Prospects sheet I have a column for " Stage" and here you have to select from a drop down menu, either "Prospect", "Contacted" "quoted" "WON" "LOST" What I would like, is that once you have selected one of the sales stage, the entire row or entry, will be automatically moved to the right tab from the "prospects" to a new sheet according to each stage.
SalesPipeline.xlsx
I have over 20 Userform which have one textbox with the same name txtsejobcode1.
Additional I have a UserForm in which user can search for a needed job code.
I wanted that after a user will choose a job code the job code will be added in to the active userform with the textbox named txtsejobcode1.
I could build this:
[Code] ..........
But in the line with Combobox I'm getting a error 438
Run Time error 438 Object doesn't support this property or method.
I have a user form in which i want an active cell value when it is initialized, its a text box which should not be editable but should able to copy when its shown.
Code:
Receipt_Number.Text = ThisWorkbook.Worksheets("reference sheet").ActiveCell.Value
I have created a user form that has 6 input boxs and at the bottom of the userform has a seventh box that has a running total. I have two buttons one to "accept" and one to "cancel". My prloblem is creating the code to make it work correctly.
1) if a cell in B5:B20 become the active cell than the userform is to open up.
2) once the useform is open the user can input up to six different numbers into the input box's which will show the runinng total in the seventh box.
3) Once all numbers are inputed into the input box's the user can hit "accept" to post the total into the active cell or hit "cancel" and nothing have nothing happen.
I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB:
Private Sub UserForm_Activate()
TextBox1.Text = ActiveCell
End Sub
[Code]...
I need a fix to my macro that does not specify the sheet name. It needs to populate the active sheet. Here is my code.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Sheet1").Activate
' determine the next empty row
[Code]....
i have a userform which has txt boxes in it which when the data is put in to it goes onto a sperate worksheet.
would like to click on a command button to view the worksheet that the data has gone onto
have tried
unload me
sheet1 show
unload me
sheet1.show
and also with the worksheets name as well
i am able to remove the title bar but unable to move the userform now.
View 2 Replies View RelatedCan the userform be coded so that it loads somewhere other than where it appears. I know that the user can move it after it loads but it would look better moved on its own prior to it being used. I have coded ThisWorkbook which loads on a double click:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
UserForm1.Show
End Sub
I need the userform to display over to the right and up a bit
1. I have a userform I created that has a text box that pulls it's data from one of the spreadsheets tab. The userform also has 5 buttons I shall call Tab1, Tab2, Tab3, Done, Cancel.
2. The first thing a user will do is make a selection from the text box.
3. The User will then select one of the "Tab" buttons.
Below is my code. What happens is that no matter what button I click (Tab1, Tab2, Tab3) it ends up on Tab3 because it is the last transfersheet line of the done_click() sub routine. How do I get it to stay on the Tab I select?
+++++
Private Sub cancel_Click()
Unload UserForm
End Sub
+++++
Private Sub done_Click()
Dim transferworksheet As Worksheet
Set transferworksheet = Worksheets("Tab1")
transferworksheet.Cells(5, 7).Value = Me.ListBox1.Value
[Code] ..........
I have created a user form and I am trying to get the active control colored. I am using the code from Mr Excel's VBA book - starts on page 454, and I have entered all the code, but now when I activate the user form I get an error ....."Compile Error. Invalid attribute in Sub or Function." and when I click OK, it takes me to this line of code.....
Private WithEvents objForm As clsCtlColor
In the book, this is where I am supposed to start entering the code "behind the userform" rather than in the class module. So, I assume this means that this code goes with all the other code for the user form (in VBA project click on form, then view code). Am I wrong? Should I be adding a module? Not sure what I am doing wrong.
Here is the code I have in the class module....
Public Event GetFocus()
Public Event LostFocus(ByVal strCtrl As String)
Private strPreCtr As String
Public Sub CheckActiveCtrl(objForm As MSForms.UserForm).......
A custom UserForm pops up when a cell is double-clicked. The form contains a ListBox that presents the user with a list of values to select. When the UserForm first pops up I want the item that matches the value of the activecell to be highlighted/selected.
View 8 Replies View RelatedI have seen a lot on how to do this with a listbox, but i need to do it with textboxes. I have 30 textboxes in order and would like to have two buttons (1 For move up and 1 for move down) to move the value from the current textbox in focus (active) and swap it up or down.
View 7 Replies View RelatedI need to simulate UserControl Design-time Drag at Runtime-time. Pratically, the user must be able to drag a Usercontrol in a wished position like programmer in VBE IDE.
View 2 Replies View RelatedI'd like to use a calender ifor this. To start, I did the following:
From Control Toolbox - More Controls - I selected:
Miscrosoft MonthView Control 6.0 (SP4)
This placed a calendar on my worksheet.
What I would like to do is the following
1. Calender Display
1a. When a next button is selected in my wizard it moves to a new form. (Got this done)
1b. The Userform has buttons: "Select Start Date", "Next", and "Cancel" (Got this done)
1c. When user selects date button, this triggers the 'Calender' to display.
Currently, ithe calender is still showing, so I first need to hide it.
It seems to be called "MonthView1" and has the following in the formula bar when Control Toolbox is in edit mode:
=EMBED("MSComCtl2.MonthView.2","")
2. Date selection
2a. User selects a date on the calender. (Easy if calender is displayed)
2b. User selects next button in User Form. (Triggers what follows....)
3. Variable assigned from selection
3a. 'Next' hides the calendar.
3b. 'Next' calls a marco that assigns the date selected from calender to a date variable.
sDate = ???.Value where ???=selected value from calender
3c. 'Next' hides current form and moves on to next in wizard sequence (I can do this)
I have been trying to create a "Search" or "Look Up" form for my database. ( Attached file - "Test - Form").
I have been given a lot of help/ideas from this forum with which I managed to get to the stage where I could select the criteria i wanted to search by using a combobox and textbox in the userform. On hitting the "Find" button it shows all the results in the listbox.
The trouble started when I tried to display the listbox selection on the labels at the bottom of the userform. As the listbox is small and cant show all the fields properly, I need to display them in labels once user selects a particular record from listbox.
I managed to find some examples of this from this forum. (file attached "Action Log"). As I am not an Excel/ VBA expert, I have missed something and am not able to make it work.
I am trying to setup a shortcut key while in a userform so you can press the page down key and the focus will jump to an "Ok" or "Close" button.
I tried the following keypress procedure without any luck.
Private Sub UserForm_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger)
If KeyAscii = vbKeyPageDown Then
Me.btnClose.SetFocus
End If
End Sub
I even tried a similar test on a textbox control wihtout luck.
Private Sub TextBox1_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger)
If KeyAscii = vbKeyPageDown Then
MsgBox "You Pressed PageDown Key"
End If
End Sub
I should say that this is a form that has a multi-page control on it and the showmodal property set to false.
It's almost like the event doesn't even fire. Does anyone have any ideas on how to get this to work?
So, I just started checking Excel Macros. I'm working on a quite large data base where I need to search for a given part number and then move N columns to the right and display the text inside that cell on a message box.
Here's what I got 'til now:
Private Sub M0016216_Command_Button_Click()
Cells.Find(What:="M0016216", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
ActiveCell.Select
[Code] ........