ComboBox Selection And Auto Userform Input Popup

Nov 22, 2011

I am new in Excel VBA and working on developing a form for Quarterly Reporting. My userform (Quarterly Report) contains controls such as combobox (one of them). I am trying to have another Userform (Risk and Mitigation) to pop-up when a specific item is selected.

Example:
With cboRiskScale
.AddItem "High"
.AddItem "Moderate"
.AddItem "Low"
End with
cboRiskScale.Value = ""

I am looking for the code where I will be able to have the "Risk and Mitigation" userform pop-up for user input when the "High" is selected.

View 7 Replies


ADVERTISEMENT

Popup Box With Buttons To Append Selection From Combobox

Sep 30, 2009

I have a userform with a combobox for material description. When a user selects a value from this list I would like a popup box to appear that contains four buttons that correlate to material type. When a particular button is selected from this input box, that value is then appended (concatenated) to the original selection made from the combobox. I have set it up where the user can "enter" a choice but I would rather it be a "pick and click" entry.

Also, is there a way to rename the vbYesNO buttons in a message box?

View 9 Replies View Related

Auto Input Data Dependant On Selection

Mar 6, 2008

I have a list of electrical item brands in column B and a list of item types in column C what i need to happen is when i select a certain brand with a certain type i would like the cost of the item to automatically enter in to column D!

Because of my rubbish description i have attached an example

View 9 Replies View Related

Excel 2010 :: How To Auto Populate Data Based On ComboBox Selection

Jan 27, 2012

I have a question on how I could populate data using a combo box selection in Excel 2010.

For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.

Maybe to make it clearer...

Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998

Combo box (selection of names): John

Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998

how I could solve this Also, do let me know if this can be done without the use of VBA.

View 4 Replies View Related

Getting Results From 4 Combobox Selection To Textboxes In Userform

Apr 19, 2013

My data resides in a workbook in sheet2 and sheet3. I have 4 comboboxs refering to different columns in sheet2 and sheet3. Basically when the user selects all the four comboboxs, the criteria should be satisfied and the results in terms of rows matching those values should be shown in the textboxs below.

Each three of the textboxs refers to individual columns in sheet2 and sheet3. All I want to do is simple search criteria on both sheet 2 and sheet3 and put the results in textboxs.

I have populated my comboboxs but dont know the macro to do the search results .

my userform,which has 4 comboboxs

combobox1 = sheet2 column C
combobox2 = sheet2 column BL
combobox3 = sheet3 column K
combobox1 = sheet3 column F

The results which satisfy the above 4 criteria should come from ,when user presses POP UP DETAILS BUTTON,

textbox1= sheet3 column C
textbox2= sheet3 column N
textbox3= sheet2 column T

Actually I have many records which satisfy the above 4 criteria, dont know how to display them whether in textbox or any another method.

View 3 Replies View Related

Userform - Combobox Cell Selection Name Range?

Mar 31, 2014

I have 3 name range in a control sheet ("Control")

Namerange Cat1, Cat2, Cat3. All of the name range are different. I am trying to cut down on my Userform that have each a userform with combobox selection.

Frmcat1, frmcat2 frmcat3.

I need to simplify my life. I need that if the user selects anything between F5:F20 to generate the userform and select range Cat1. If the user Select G5:G20 then to generate Cat2 and so on...

So on userform Initialize look if the user is in Column F, is yes then Cat1. If user in Col. G then Cat2 and final if user is in Col H to have Cat3 generate in the combobox.

View 5 Replies View Related

Open Userform Based On Combobox Selection?

Feb 20, 2012

I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.

View 4 Replies View Related

Change Userform Label Based On ComboBox Selection

Dec 21, 2009

I have a userform that has a "payment type" combo box

This box consists of:

View 6 Replies View Related

Filtering Data From One Worksheet To Another Based On Selection In Combobox On Userform

Feb 14, 2013

I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.

Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long

[Code]....

View 1 Replies View Related

Popup Input Box Within Nested If?

May 1, 2012

I'm trying to create a nested if statement, which given a certain condition, will pop up an input box to grab a user-defined value as follows:

Public Function DetermineCost(ManipulationType As String, Manipulation As String, Value As Single) As String
Dim SkillCost As Single
If ManipulationType = "Improve" And Manipulation = "Damage" Then
DetermineCost = Value * Sheet1.Range("N74").Value
ElseIf ManipulationType = "Improve" And Manipulation = "Resistance" Then DetermineCost = Value * Sheet1.Range("N75").Value
ElseIf ManipulationType = "Improve" And Manipulation = "Physical Skill" Then DetermineCost = InputBox("Enter GM Cost")

[code].....

The code portions in red are not working properly. I also have the "No Value" if statement not working which I'm not sure why, but the main function I'm trying to figure out is how to popup an input box where a user will input a value when Manipulation = "Physical Skill" or "Non-Physical Skill".

specify the input box data type, that would be amazing. I tried InputBox ("Enter...", Type:=1) but VBA didn't accept that as a value. and yes, I recognize that SkillCost is not currently utilized. I plan to utilize it once I figure this stuff out.

View 4 Replies View Related

Modify Code To Have Popup Box For Input

Jun 12, 2009

I wanted to change a column text to call intial Caps. I found this macro code on the microsoft web site

Sub Proper_Case()
' Loop to cycle through each cell in the specified range.
For Each x In Range("C1:C5")
' There is not a Proper function in Visual Basic for Applications.
' So, you must use the worksheet function in the following form:
x.Value = Application.Proper(x.Value)
Next
End Sub

I need to change the macro to have a input box (asking what column to convert text to initial CAPS)

View 9 Replies View Related

Displaying Input Box Based On User Selection Of Dropdown Selection?

Jun 3, 2013

If a user selects certain options from a drop down list created by cell verification (from list), is it possible to display an input box and have the resulting input populate on another worksheet in the workbook? I have an attendance template I'm working with and if a user selects OT (Over Time) then a input box is displayed prompting for how many hours. The overtime is then tracked on another worksheet.

View 1 Replies View Related

ComboBox Selection That Fills A TextBox And Other ComboBox

Sep 28, 2013

I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.

Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range

[Code].....

View 2 Replies View Related

Populate Combobox Based On Selection Of Other Combobox

Jun 12, 2006

I have a table, headers "FirstName" and "SurName".

Further a Userform with 2 Comboboxes "FirstName" and "SurName"

I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.

Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.

View 9 Replies View Related

Auto Populate 2nd Combobox Based On 1st Combobox Data

Mar 30, 2014

I need to populate two combo boxes from excel sheet, the data will be like below:

Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102

So from the above data, one combo box should hold unique values A & B.

On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.

So the data should be like below:

If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.

Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.

View 1 Replies View Related

Popup Userform

Aug 16, 2007

I like to know if this can be done. The entry of data for cell A3 is from a pre-determined list. I like to create a Userform to allow the user to select from this form. the idea is to have this form popup whenever cell A3 is selected.

View 9 Replies View Related

Warning Auto Popup When Reaches The Certian Number

Mar 2, 2007

I have a table array which shows me that amount of each I have in each spot.
What I need is a warning to auto popup when it reaches a certain number.
I need this for many different cells.
So if cell m20 changes from 3 to 2 it should popup and say only two xx are available and keep going down from there.

View 9 Replies View Related

UserForm As Popup Message While Calculating

Jun 3, 2009

I am building a macro that deals with a lot of data and takes several minutes to run. I want to display a message to the user stating "Calculating..." while the calculating is taking place. I got the idea to use a userForm with a label on it. The problem is that excel waits for input from the userform before continuing the calculations.

How do I display the userform, continue doing the calculations, and then hide the userform when the calculations are complete? (without any input from the user)

I currently have:

View 3 Replies View Related

Create RMB Popup Menu In Userform?

Jan 25, 2010

I would like to create a simple right mouse button popup menu for the text box on a userform. I just want Copy and Paste and the functionality that goes with them if possible.

View 2 Replies View Related

Right Click Popup Menu For UserForm

Dec 17, 2007

I used the commandBar to create a right-click menu on a userForm but unfortunately I get an error 400 every time I click on the option "Edit" and I don't understand what I did wrong.

Sub CreateCmdBar()
Dim st As CommandBar
'delete the pop-up if it exists
On Error Resume Next
Application.CommandBars("flexgrid_rc").Delete
'Disables enabled error handler in the current procedure and resets it to Nothing. On Error GoTo 0
On Error Goto 0
Set st = CommandBars.Add( Name:="flexgrid_rc", Position:=msoBarPopup, Temporary:=False)
'add two menu items to the new commandbar
With st..................

View 3 Replies View Related

Userform Popup When Text Is Manually Entered

Aug 6, 2009

I am trying to get a user form to popup when text is manually entered into a certain cell. Right now the cell has a drop down in it that the user can select from a list of people. What I would like is that if the person is not in the dropdown list they can enter their name in the cell or select not in list and a user form will popup and ask them to enter their name and weight which will then be put into a different cell. This may be a complicated way to do this but the workbook is very complicated as is already and I cant figure out anything else to work.

View 9 Replies View Related

UserForm Input (a Button That Opens An Input Box Or Dialog Box)

Jul 4, 2006

I have to design an input user form (a button that opens an input box or dialog box), which asks user to "Enter number of "columns"".

User enters a number i.e. 2 or 3 etc

It then asks user for the headings of these coulmns and places first column heading in A1 and second column heading in B1, third in C1 and so on ...

View 9 Replies View Related

Open Popup Menu In Specific Position In Userform?

Mar 7, 2014

I have one Popup Menus in Userform, But i want to to Open Popup menu in Specific Position in userform, In Fixed Position,i want to specific a position which opens Popup Menus in Userform.

Look In Example in Attach.

[Code]....

menu_1.xls‎

View 2 Replies View Related

Userform Loads Combobox Values Upon Userform Initialize

Oct 1, 2009

I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.

View 5 Replies View Related

Userform Combobox Value Selects Next Combobox To Appear

Dec 2, 2009

I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.

View 2 Replies View Related

Userform - Second Combobox Based On First Combobox

Apr 9, 2012

I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.

Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And

[Code] ........

I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.

I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'

For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...

View 6 Replies View Related

Combobox Dependent On First Selection

Jun 17, 2014

I have a list of departments on "Employee Data" sheet on column A and list of staff names on column B. It looks like this:

DEPT FULL NAME

pdi Bob Tan
pdi John Christian
aftersales_bikes Jim Yeo

I have 24 departments in total and 300 over employees in mt employee data sheet.

On "Jan - June 2014 Training Hours" sheet, when employees attend training courses, I will have to update what courses they went for, no of hours etc.

My problem is:

I would like to select the department (using combo box for the auto complete function) and when department is selected, the staffs in that particular department will show. I have attached the file for your understanding. Currently, I am using data validation with indirect function in that file but would like to switch to combo box.

View 2 Replies View Related

Updating Combobox Selection

Feb 17, 2014

I have a userform used to input data. I contains textboxes and comboboxes and a command button that is clicked on to record the data onto a worksheet.

What I am looking for is a combobox that is linked to a list of clients (column A of worksheet "Clients").

I would like the user to click on the combobox and select a client name. If the client is new then I would like the user to be able to type in the new name and, then have that name available in the "Clients" names that appear the next time the user clients on the combobox.

I have it almost working, but not quite.

I have a defined name on the "Clients" worksheet as follows:

[Code]....

View 5 Replies View Related

Combobox Selection Via Paste

May 26, 2007

I have a cell range with the following data:

A 1 2 3
B 4 5 6
C 7 8 9

On another worksheet, I have multiple comboboxes from the Controls toolbar in a column, each having possible selections are based on the data in a column 1 above (ie. A,B,C). When a selection is made in any of these comboboxes, cells to the right of the combobox get populated with the corresponding remaining data from the above cell range - ie. when A is selected, 1,2,3 appears to the right of the combobox, when B is selected, 4,5,6, etc. I want to be able to make selections from within combo boxes, not only by using the combo box dropdown and select mechanism, but also, if possible, by pasting a cell range whose data matches one of the existing selections available in the combobox definition. In other words, if I have a single column cell range from somewhere with the following data in 1 row:...............

View 2 Replies View Related

Retain Combobox Selection

May 30, 2007

I am programming some kind of database in excel and using comboboxes as drop down lists to enter some of the information in the DB. My problem is that when the file is saved, closed and then opened again, all of the comboboxes have lost their selection. I think that using the ControlSource might help but for some reason I can't find the proper syntaxe to make it works. Actually I am getting a Run time error 438: This object doesn't support this property or method.

I have included the relevant portion of my code below. Is the ControlSource property going to solve my problem? If so, what is the syntax I must use? If not, what can I do to make sure that my ComboBoxes are going to keep their selection?

ActiveSheet. OLEObjects.Add(ClassType:="Forms. ComboBox.1", Link:=False, _
DisplayAsIcon:=False, Left:=hori_offset - 220, Top:=vert_offset + 78, _
Width:=180, Height:=24.75).Select
With ActiveSheet.OLEObjects("ComboBox1").Object
.Font.Size = 14
.Font.Bold = True
.Style = fmStyleDropDownList 'Use drop-down list
.BoundColumn = 0 'Combo box values are ListIndex values
End With
With ActiveSheet.Shapes("ComboBox1")
.OLEFormat.Object.ControlSource = "Q1"
.OLEFormat.Object.ListFillRange = "M1:M8"
End With

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved