Named Range Became Disconnected From QueryTable
Dec 30, 2009
When a QueryTable is refreshed and the number of rows it returns changes, I *expect* that a corresponding Named Range should be automatically resized. The sheet-level Named Range (same name as the QueryTable) should cover the query result's header row and all returned data rows.
But now I've got a Named Range that seems to have become disconnected from its QueryTable. The query returns fewer rows but the Named Range stays the same size.
This is even more perplexing because the aberrant QueryTable is right next to another QueryTable that is behaving normally. The Data Range properties of both are identical.
View 4 Replies
ADVERTISEMENT
Dec 5, 2008
See the attached spreadsheet with a macro that gets the querytable in Sheet1. In sheet2 there is a formula to get one of the balances from the querytable result. Is there a way to find the balance on sheet2 from the querytable at runtime so that I do not have to download it to Sheet1? Then I could do away with Sheet1 altogether.
View 2 Replies
View Related
Aug 16, 2014
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
View 5 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
Jul 19, 2013
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
View 2 Replies
View Related
Oct 25, 2009
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies
View Related
Mar 14, 2013
Merge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
View 3 Replies
View Related
Jun 11, 2007
I have a csv archive file on a remote server that I am accessing with excel. The problem, if I use QueryTable, all info is placed in the first column. If I use the workbook.open method, the info is placed in the proper cells, but it is in a seperate workbook.
So, how do I get the workbook.open results, except in the active workbook/worksheet? Or, is there a way to QueryTable (my preferred method) and get it into seperate cells?
Here is my
Sub RemoteFile()
Dim csvfile As String
On Error Goto ErrRemoteFile
Call CreateBatchFile
Call CreateScriptFile
View 4 Replies
View Related
Jul 10, 2008
I have the following code which works but is slow. All the code is the same except the address part and the destination range. Any help simplifying would be great. Also, every time I run the sub it asks me if I want to replace the destination cells. Is there any code to circumvent that? Lastly, although the second and third query requests have a different destination range, excel shifts the previous query to the right, hence first command after final query request.
View 10 Replies
View Related
Sep 26, 2011
How do I handle URL connections - such as logging into a web application?
Example 1
When I use .Refresh BackgroundQuery:= False and there is a problem connecting, Excel hangs ... cannot Ctrl-Break ... only option is to kill Excel (and lose changes).
global QT As QueryTable
Set QT = ActiveSheet.QueryTables.Add(Connection:="URL;" & vLoginURL,
[Code]....
Now, if it's still refreshing, it's ok. But if not, it gets stuck on .Refreshing with run time error 424.
Ideally I want to use .Refresh BackgroundQuery:= False as I am calling a number of urls. I just need to provide an "out" when the url fails and hangs on .Refresh BackgroundQuery:= False
View 6 Replies
View Related
Jul 28, 2006
I have a querytable running on my sql database. In the query I have a trimleft function because the numbers are stored with several proceeding blank spaces. When I execute the query through my macro, everything works fine, except I can't average or sum the results. They can be multiplied, divided, etc, but not averaged or summed (they just show as zero on summing, which makes the average DIV/0). The really strange part is that if I select a number and go to the formula bar and hit delete at the beginning of the number (which actually deletes nothing), the number is suddenly capable of actually performing as a number. I assume this has something to do with how the querytable is returning my results, but does anyone have an idea for a workaround for this issue?
View 3 Replies
View Related
Aug 22, 2006
I have a bunch of workbooks that are used to capture information about implants used in surgical cases. I use a small VBA process each morning to update a querytable which contains all of the core patient information for future cases, however it is not working properly. The code goes through the process OK, or so it appears, opens and closes each sheet, and saves them appropriately, but the query table doesn't seem to refresh no matter what I do.
Sub RevisedRefresh()
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch
.LookIn = "G:SHSTheatreCommonReceptionImplants"
.FileType = msoFileTypeExcelWorkbooks
If .Execute > 0 Then
For lCount = 1 To .FoundFiles.Count
Set wbResults = Workbooks.Open(Filename:=.FoundFiles(lCount), UpdateLinks:=0)...............................
View 3 Replies
View Related
Jul 23, 2013
I wrote a script to get stock quotes from yahoo finance and place the info on a spreadsheet. The script reruns every 15 minutes. All works fine until the computer goes to sleep, then upon waking, the error 1004 appears with the debug or exit options, telling me it cannot find yahoo finance. The error occurs because the computer takes @ 3 seconds to reconnect to the internet on waking.
If I choose debug, and continue the script it completes without error. The script will continue once again collecting stock quotes every 15 minutes until the computer exits sleep mode again.
I have tried using
On Error GoTo 0
On Error Resume Next
both still result in the error 1004.
What I would like is for the error to be ignored, and the script to complete.
View 8 Replies
View Related
Sep 21, 2007
I seem to be coming on here every day at the moment! Someone helped me with this code, it works great apart from 1 error, which stops the script. The lines that appear when i select debug are in italic / bold. The error message appearing is:
"Object invoked has disconnect from its client" or something very similar.
'Define variables.
Dim lngRowPasteTo As Long
Dim codelive, codeclosed, codeassigned, vLookFor As String
'Set variables
vLookFor = "Closed"
codelive = "gio1"
codeclosed = "gio2"
codeassigned = "gio3"
Worksheets("Live").Unprotect Password:=codelive
Worksheets("Closed").Unprotect Password:=codeclosed
Application. ScreenUpdating = False
MsgBox ("Moving Claims...")
'Ensure the 'Live' tab is selected (active).
Sheets("Live").Select
'Remove any existing AutoFilters.
ActiveSheet.AutoFilterMode = False
View 9 Replies
View Related
Jan 18, 2008
I developed an Excel application for some users. Everything used to wrok very well until recently. When the click some buttons, the error "Automation Error: Object has disconnected from its clients" appears. Problem is, everything works very well on my PC. We run the same Excel version, same OS but I can't seem to find a solution to this problem. I'd have posted the code I'm running here but I don't know how to use the code tags and I don't want to be banned from this forum.
View 6 Replies
View Related
May 21, 2014
I get this error on clicking a button in userform1 to display the userform2 (userform2.show) , i checked with another form and it works .
if i click on button to show userform2 second time , it displays outline of form and on third time it displays the form correctly .
View 3 Replies
View Related
Feb 3, 2014
Shared Workbook
"Existing Risk Changes" worksheet is "Very Hidden"
getting the "Object invoked has disconnected from its client" Run Time Error.
I'm not getting the error when the workbook is not in shared mode.
Code:
'When Submit is clicked there is a check done to make sure that the submitter has enterred a name:
Private Sub cmdSubmitEdit_Click()
[Code]......
View 2 Replies
View Related
Sep 4, 2007
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
View 8 Replies
View Related
Jun 17, 2013
Ever since I updated to excel 2010 I am getting this error "Automation error: the object invoked has disconnected from its client" for this line
Sheets("Data-History").Range("E" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
View 9 Replies
View Related
Jan 6, 2010
I have created workbooks for four health regions to collect data, which then needs to be resubmitted via FTP, but with de-identified data. The end users have little to no excel experience, thus had to make it simple as possible. Created a button that runs the macro (below) to deidentify (clear) all cells where there could possibly be personal identifying information. Runs fine on my cpu, but one user (so far) has received the error noted in the title. Both running excel 2003 with SP3 (I have version 11.8169.8172, user has 11.8316.8221), I have XP professional SP2, user has XP professional SP3. Spent hours searching and reading suggestions online, to no avail.
View 3 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Apr 10, 2013
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
View 1 Replies
View Related
Jul 15, 2014
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies
View Related
Aug 10, 2008
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
View 9 Replies
View Related
Sep 8, 2006
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
View 4 Replies
View Related
Aug 25, 2006
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies
View Related
Sep 13, 2007
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
View 9 Replies
View Related
Jan 25, 2013
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup
MsgBox Range(thisString).Address
Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)
View 1 Replies
View Related
May 16, 2014
OK, I have a huge SS with lots of named ranges. Many of which are dynamically assigned lists.
All of the existing ones work fine, but when try to add a new named range, it returns the cells from a previously named range. (Always the same old one.)
example:
A range (one of many) is named "Shift_List" and is defined using
=OFFSET(info!$C$3, 0, 0, COUNTA(info!$C$3:$C$2000),1)
New range is created named "PN_List" and is defines using
=OFFSET(info!AA$3, 0, 0, COUNTA(info!AA$3:AA$2000),1)
When I create a Data Validation List or otherwise use "Shift_List" as the source it works fine.
However if I do the same thing and refer to "PN_List", it returns the items from "Shift_List"
Any new named range returns the Shift_List cells, although older ones still work correctly.
View 8 Replies
View Related
