No Cells Found Error: 1004

Oct 4, 2009


Private Sub Worksheet_Activate()
Sheets("Search Inv").Protect UserInterFaceOnly:=True
ActiveSheet.Range("A17:F37,C39:C42,F39:F42").Select
Selection.SpecialCells(xlCellTypeConstants, 23).Select
Selection.ClearContents
End Sub

Above is meant to clear the contents of cells that contain formulas while keeping the formulas.
The sheet is protected ... no password
What is wrong ... when I activate the sheet I get: Run Time error 1004 / no cells found
(All cells that are meant to be cleared are selected ... they just don't clear)

View 9 Replies


ADVERTISEMENT

Run-Time Error 1004 No Cells Were Found

Sep 25, 2008

This macro starts out looking for the first non blank cell by looking down about a hundred cells and then going back up till it finds the first non blank cell. When it finds the first non-blank cell it goes up 1 row and adds 1 to the number for the next row. It works fine the first time then, after the file is saved it will stop the macro with the following message; Run-time error 1004 No cells were found. If I format the cells in question, the macro works again until I save the file, then it happens again.

Excel 2003 11.8220.8221 SP3
I think there is a hotfix for this but I can't get it to install. Is there a way around this?

This is the portion of the code that gets the error:

Range("A11:A100").Select
Selection.SpecialCells(xlCellTypeBlanks).Select
ActiveCell.FormulaR1C1 = "=+R[-1]C+1"

View 9 Replies View Related

Looped Error Check Not Working: Error 1004 Is Generated When A Match Cannot Be Found In The Spreadsheet

Jul 2, 2006

the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow

res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then

Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)

'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................

View 6 Replies View Related

Run-time Error '1004':File Not Found :: Folder On Network

Dec 9, 2009

The script below scans through a specified folder on a network and scans every xls file inside that folder for a value. When it finds the spreadsheet which contains that value (a policy number) it outputs some of the data from the matching file and also provides a link to the sheet in question.

It worked perfectly until I saved, exited and re-opened the file and now I am getting a 1004 run-time error every time I try and execute the script.

I cant for the life of me work out a cause.

More baffling, the wording of the error says that the file 'R:DirCancellations.xls' could not be found.

At no point is a file called 'Cancellations.xls' specified. Why has the script decided to search for a file called 'Cancellations'?

Sub Search()

ActiveSheet.unprotect
ActiveWorkbook.unprotect
Dim wb As Workbook
Dim TheFile As String
Dim MyPath As String
Dim DirLoc As String
Dim PolNum As String
ActiveSheet.Range("C13:G25").ClearContents................

View 9 Replies View Related

Range(cells(),cells()) From 2 Different Workbooks, Run Time Error 1004

Feb 19, 2010

I've been trying to copy values from one range to another, and the ranges need to be dynamic. Normally I use a combination of the 'range' and 'cells' properties, like this:

View 2 Replies View Related

Error 1004 Using Range.Cells() Properties In Vba

Apr 18, 2009

I keep getting the following error : Run time error'1004'; Application-defined or object-defined error when using the following

View 8 Replies View Related

Runtime Error 1004 - Cells Not Locking?

Jul 23, 2013

I am trying to protect cells & password protect my workbook on closing. Here is my code. Not only is the cell locking code not working, but it is also preventing the code from re-hiding the columns ("P:P,R:R,W:W,U:U,AA:AA"). Here is my code; I've tested it on a blank sheet & it was working:

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.ScreenUpdating = False
Application.EnableEvents = False

[Code].....

View 2 Replies View Related

Error 1004 When Trying To Move Cells 24 Cols To The Right

Jun 11, 2008

http://www.mrexcel.com/forum/showthread.php?t=323741

From the above thread I am using the following macro...

Sub MoveOver()
Dim MoveRange As Range

Application.ScreenUpdating = False
With Range("B1", Range("B" & Rows.Count).End(xlUp).Offset(, 21))
.AutoFilter field:=1, Criteria1:="=C&P"
On Error Resume Next
Set MoveRange = .Offset(1).Resize(.Rows.Count - 1).SpecialCells(xlCellTypeVisible)
On Error GoTo 0
.AutoFilter
End With
If Not MoveRange Is Nothing Then
MoveRange.Insert Shift:=xlToRight
End If
Application.ScreenUpdating = True
End Sub

I am getting an error 1004 message saying cells cannot be moved off of the spreadsheet. However, my last cell on the sheet is J28956.

Columns B through J contain data. Columns beyond J do not contain data.

Can someone give advice on getting the macro to work.

View 9 Replies View Related

Runtime Error - No Cells Were Found

Oct 1, 2013

I am new to VBA and created the following code:

Sub UpdateSchedule()
'
' UpdateSchedule Macro
' Save changes to schedule, create import table for MRP, and timestamp.
'
' Keyboard Shortcut: Ctrl+Shift+U

[Code] ...

When I run it it tells me that "No cells were found and the debugger highlights the following line of code:

Range("Import[FG GP'#]").SpecialCells(xlCellTypeBlanks).EntireRow.Delete

I have tried inserting:

On Error Resume Next
Range("Import[FG GP'#]").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
On Error GoTo 0

This makes everything work except the deleting.

View 7 Replies View Related

Change Cells Colour: Range Error '1004'

Jan 10, 2007

Run-Time error '1004':
Method 'Range' of object'_worksheet' failed

The Function basically takes any cell in range with a formula and has it blue. If the formula is overwritten by the user it turns the cells colour Red.

Private Sub Worksheet_Change(ByVal Target As Range)

'change Colour of cells from blue if formula based to red if data typed by user

If Not Intersect(Target, Range("AS63,BA5:BP66,BT7:CI55,BU60:BU64,BX60:BX64,CA60:CA64,CD60:CD64,BT55:CI66,BT59:CI59,CF7:CF55,CF65:CF66,DJ19:DJ21,DJ24,DL5:DM36,DJ41,DJ45,DJ48,DL41:DM48,DH50:DH51,DJ50:DJ51,DL50:DM53,DH63,DJ63,DL55:DM58,DL60:DM66,DU5:DV33,DU37:DV58,DZ8:EB8,ED5:EE27,ED31:EE66,EM5:EN12,EM16:EN29,EM33:EN38,DH63,AL5:AM26,AL30:AM49,AL53:AM66,AV5:AW16,AV20:AW29,AV33:AW53,AV55:AW63,CO5:CO66,CQ5:CR66,CY5:CY66,DA5:DB66,DJ5:DJ7,DJ14:DJ15,DJ17")) Is Nothing Then
If Target.HasFormula Then
Target.Font.ColorIndex = 11
Else
Target.Font.ColorIndex = 3
End If
End If
End Sub

View 4 Replies View Related

Count Blank Cells To Avoid Runtime Error 1004

Mar 10, 2013

I got a macro connected to a button that select empty cells within a range and fill them with the value above. The code looks like this:

Code:
Range("A1:A10").SpecialCells(xlCellTypeConstants, 23).Select
Selection.Resize(, 4).Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.FormulaR1C1 = "=R[-1]C"

[Code] .......

If you press the button twice you will get run-time error 1004 becuase Excel can't find any empty cells.

I want a function that counts blank cells before running the macro. If there are no blanks I don't want to execute the macro. That is to avoid run-time error 1004.

View 7 Replies View Related

Run-time Error '1004' :: Merged Cells To Be Identically Sized

Nov 14, 2006

What Im doing is sorting one page and copying the information to another page in the same workbook. But I keep getting this stupid error.

Run-time error '1004'
This operation requires the merged cells to be identically sized.

View 9 Replies View Related

VBA Runtime Error 1004 - Macro To Select All Cells Of Same Color Within Selected Area

Mar 26, 2014

I have the following code that allow me to select all of the cells with the color same as the active cell within a selected range:

Sub SelectCellColor()
Dim CellColorFormat As Long
Dim RangeString

[Code]....

I'd like to ask how can I fix the error so that there will not be a limit of the number of colored cells in a selected area?

View 2 Replies View Related

Vba Macro Error: Compile Error Named Argument Not Found

Apr 26, 2006

I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:

COMPILE ERROR:
NAMED ARGUMENT NOT FOUND

Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub

It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.

View 2 Replies View Related

Error 1004 :: Application-defined Error

Aug 19, 2009

Before I go into details I am working in one workbook with several worksheets(Tabs) in the workbook. I have three Buttons on one tab. the button I am having trouble with is the third. I want to insert a column in a separate tab that contains approximately 87,000 rows of data. I then want to do a row count and select the empty cells in the inserted column and put a formula in there. I have tried a loop VBA code and it works, but it takes about 30 minutes to run all the way through. The underlined portion is what is higlighted with error 1004: Application-defined ro object-defined error. I am not sure how to fix this. This is what I have now:

View 13 Replies View Related

At Wit's End With Error 1004.

Jan 17, 2008

I'm using VB 6.5 and Excel 2007. I've got a workbook that has code that creates another workbook (by copying sheets out of the current workbook) and drops a button on that workbook and creates a macro for that button. Everything works except one thing which gives me


Runtime Error 1004: Unable to update the Caption Property of the Button Class.

If I run the code manually (rather than calling the subroutine from from within another subroutine) it runs without error but if I call it from within the subroutine that copies sheets from the original workbook to a new workbook I get the error. Any idea why this might be? What I might be doing wrong? The code for this subroutine is as follows:

Sub CreateButton()
Dim btnMyButton As Button
Set btnMyButton = ActiveSheet.Buttons.Add(460, 75, 140, 30)
btnMyButton.Caption = "Delete and Update Charts and Lists"
End Sub

View 9 Replies View Related

Run Time Error 1004 Application-defined Or Object-defined Error

Mar 5, 2013

I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...

VB:
Sub GetRangeName()
Sheets("TOTAL").Select

[Code].....

use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.

View 1 Replies View Related

Run Time Error 1004 (application-defined Or Object-defined Error)..

Apr 26, 2009

I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username

View 10 Replies View Related

Run-time Error '1004' Application-defined Or Object-defined Error

Aug 12, 2009

Run-time error '1004' Application-defined or object-defined error. I am trying to use this

View 2 Replies View Related

Run Time Error 1004 - Application-Defined Or Object Defined Error

Oct 4, 2009

I was trying to use the below code

View 4 Replies View Related

Run Time Error 1004 (Application Defined Or Object Defined Error)

Dec 4, 2009

I keep getting a Run Time Error 1004 (Application Defined or Object Defined Error) when my sub reaches this line:

ActiveCell.Formula = "=SUM(D222,D224,D226,D227,D229,...)"

In the actual line of code the "..." above is another 20-30 or so cells in column "D". Probably no more than 150-170 characters in the line.

If I remove half of the cell range names it works, but I need all of the cell ranges for the equation.

View 9 Replies View Related

Runtime Error 1004 Application-defined Or Object-defined Error

Jul 24, 2007

I am trying to copy the info from one workbook to another workbook.

I keep getting the above referenced error...

Private Sub CommandButton1_Click()
Dim filepath As String
filepath = Range("A100")
MsgBox ("File Appended")
Workbooks.Open (filepath)
Windows("CorrespondenceMaster.xls").Activate
Sheets("Sheet2").Select
Range("DesNo", "LocationPath").Select
Selection.Copy
Windows(filepath).Activate
Range("A2").Select
ActiveSheet.Paste
End Sub

View 3 Replies View Related

1004 Run Time Error

Apr 9, 2014

I have a sheet that will force user to enable macro before revealing the sheets and enabling them to key in data. But because I need to protect the workbook from user deleting sheets and also having some locked cells. I got the run-time error 1004 unable to set visual property of worksheet class

View 1 Replies View Related

Runtime Error '1004'

Jan 12, 2007

Is there a limit on the amout of pictures you can use with the statement me.pictures.visible? Reason being, I am trying to import 119 pictures into a spreadsheet. When the information is selected form a drop down list, it pulls up the 1 of the 119 pictures. I was able to get 54 pictures input. Everything was going great until the 55th. When it stared giving me an error...
______________________________________________
Runtime Error '1004':

Unable to set the Visible property of the Pictures class
______________________________________________

When I select Debug, it takes me to the line with Me.Pictures.Visible = False

Everything seems to work fine until I enter the 55th picture. If it is that, is there a viable work around?

View 9 Replies View Related

Run Time Error 1004

May 5, 2014

the problem I'm having is that when trying to copy the value of cell A2 and paste it in cell A4 with (INSERT with the second button of the sheet). this give me the error RUN TIME ERROR '1004 '.

View 7 Replies View Related

Runtime Error 1004,

Feb 22, 2007

Getting a error message when opening a workbook "Runtime error 1004" I dont know much about excel and the user explained it to me as best she could . Here is where the script bugs:

Sub auto_open()
fdist = ActiveWorkbook.Name
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Worksheets("f_cumul").Cells.ClearContents
Worksheets("f_cumul").Cells.ClearFormats
Worksheets("vtes_dj").Select
Range("a1").Select
Selection.End(xlDown).Select..............

View 9 Replies View Related

Run Time Error '1004'

Jul 24, 2008

having a nightmare with a pivottable in VBA. I cannot give it a dynamic datasource. Surely i must be coding this wrong.

it breaks on setting the range for PTRange with the error

Run Time Error '1004'

application-defined or object-defined error

View 10 Replies View Related

Autofill Error 1004

Dec 3, 2009

When I run the following macro i receive the following error

Runtime Error '1004'

Method 'Range' of object '_Global' failed

View 7 Replies View Related

Error 1004 While Save As

Dec 7, 2009

I'm trying to create a macro that will take a worksheet from an Excel workbook, and save it as a text file, with the name determined from user input, and the location being the desktop of the currnet user's computer.

First I use a function, (provided by RoyUK), to get the name of the current desktop, then I try to use that name, along with my user input, so save the file. Obviously, it's not working, or I wouldn't be here. I get a "Run-time error '1004': The file could nto be accessed". I think it's just a syntax issue with the file name, because debug takes me to the "SaveAs" portion of the macro.

View 2 Replies View Related

Error 1004 With Web Query

Dec 8, 2009

I have a freaking problem coming from a Web Query. Actually, I get an "Execution Error 1004" because of the following piece of

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved