From the above thread I am using the following macro...
Sub MoveOver()
Dim MoveRange As Range
Application.ScreenUpdating = False
With Range("B1", Range("B" & Rows.Count).End(xlUp).Offset(, 21))
.AutoFilter field:=1, Criteria1:="=C&P"
On Error Resume Next
Set MoveRange = .Offset(1).Resize(.Rows.Count - 1).SpecialCells(xlCellTypeVisible)
On Error GoTo 0
.AutoFilter
End With
If Not MoveRange Is Nothing Then
MoveRange.Insert Shift:=xlToRight
End If
Application.ScreenUpdating = True
End Sub
I am getting an error 1004 message saying cells cannot be moved off of the spreadsheet. However, my last cell on the sheet is J28956.
Columns B through J contain data. Columns beyond J do not contain data.
Can someone give advice on getting the macro to work.
I have 40000 rows of data to check. I always filter Column E by Suppplier Name, like supplier Alpha or Bravo,Charlie,Donkey, or Elephant,France,Goal etc.
What I manually check is I filter the column E by Alpha, then I will get some 5000 rows of data of Alpha, I will look if all the rows in Column B contais "-3digit" numbers like -123,-548 etc if not I will assume its incorrect and copy the entire row and put it in next sheet.
If Column B is right that is, if it contains -3digit then I will again look in Column F ( Invoice Numbers) the invoice number should always be 5digt-4digit all numbers without space or any special charactors except Hypen(-). It may have 5digt-4digit-5digit-4digit etc, if any values doesnt match with the said criteria i will again assume it as incorrect and move to the next sheet.
Now once this is done i will filter againn Column E by "Bravo" all the conditions are same, that is if the supplier name is Alpha Bravo, charlie, Donkey, or Elephant then i will do all the checks mentioned above or else i will ignore all other supplier....
I've been trying to copy values from one range to another, and the ranges need to be dynamic. Normally I use a combination of the 'range' and 'cells' properties, like this:
Private Sub Worksheet_Activate() Sheets("Search Inv").Protect UserInterFaceOnly:=True ActiveSheet.Range("A17:F37,C39:C42,F39:F42").Select Selection.SpecialCells(xlCellTypeConstants, 23).Select Selection.ClearContents End Sub
Above is meant to clear the contents of cells that contain formulas while keeping the formulas. The sheet is protected ... no password What is wrong ... when I activate the sheet I get: Run Time error 1004 / no cells found (All cells that are meant to be cleared are selected ... they just don't clear)
I am trying to protect cells & password protect my workbook on closing. Here is my code. Not only is the cell locking code not working, but it is also preventing the code from re-hiding the columns ("P:P,R:R,W:W,U:U,AA:AA"). Here is my code; I've tested it on a blank sheet & it was working:
Private Sub Workbook_BeforeClose(Cancel As Boolean) Application.ScreenUpdating = False Application.EnableEvents = False
This macro starts out looking for the first non blank cell by looking down about a hundred cells and then going back up till it finds the first non blank cell. When it finds the first non-blank cell it goes up 1 row and adds 1 to the number for the next row. It works fine the first time then, after the file is saved it will stop the macro with the following message; Run-time error ‘1004’ No cells were found. If I format the cells in question, the macro works again until I save the file, then it happens again.
Excel 2003 11.8220.8221 SP3 I think there is a hotfix for this but I can't get it to install. Is there a way around this?
This is the portion of the code that gets the error:
Run-Time error '1004': Method 'Range' of object'_worksheet' failed
The Function basically takes any cell in range with a formula and has it blue. If the formula is overwritten by the user it turns the cells colour Red.
Private Sub Worksheet_Change(ByVal Target As Range)
'change Colour of cells from blue if formula based to red if data typed by user
If Not Intersect(Target, Range("AS63,BA5:BP66,BT7:CI55,BU60:BU64,BX60:BX64,CA60:CA64,CD60:CD64,BT55:CI66,BT59:CI59,CF7:CF55,CF65:CF66,DJ19:DJ21,DJ24,DL5:DM36,DJ41,DJ45,DJ48,DL41:DM48,DH50:DH51,DJ50:DJ51,DL50:DM53,DH63,DJ63,DL55:DM58,DL60:DM66,DU5:DV33,DU37:DV58,DZ8:EB8,ED5:EE27,ED31:EE66,EM5:EN12,EM16:EN29,EM33:EN38,DH63,AL5:AM26,AL30:AM49,AL53:AM66,AV5:AW16,AV20:AW29,AV33:AW53,AV55:AW63,CO5:CO66,CQ5:CR66,CY5:CY66,DA5:DB66,DJ5:DJ7,DJ14:DJ15,DJ17")) Is Nothing Then If Target.HasFormula Then Target.Font.ColorIndex = 11 Else Target.Font.ColorIndex = 3 End If End If End Sub
If you press the button twice you will get run-time error 1004 becuase Excel can't find any empty cells.
I want a function that counts blank cells before running the macro. If there are no blanks I don't want to execute the macro. That is to avoid run-time error 1004.
My excel file was imported from a 3rd party and has many blank rows across the entire sheet. I want to delete these rows if every cell across is blank. How is this accomplished?
I tried the formula "=isblank(C2:C18)" however I get a "False response on those rows that are completly blank.
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox. the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0) If Not IsError(res) Then
Before I go into details I am working in one workbook with several worksheets(Tabs) in the workbook. I have three Buttons on one tab. the button I am having trouble with is the third. I want to insert a column in a separate tab that contains approximately 87,000 rows of data. I then want to do a row count and select the empty cells in the inserted column and put a formula in there. I have tried a loop VBA code and it works, but it takes about 30 minutes to run all the way through. The underlined portion is what is higlighted with error 1004: Application-defined ro object-defined error. I am not sure how to fix this. This is what I have now:
I'm using VB 6.5 and Excel 2007. I've got a workbook that has code that creates another workbook (by copying sheets out of the current workbook) and drops a button on that workbook and creates a macro for that button. Everything works except one thing which gives me
Runtime Error 1004: Unable to update the Caption Property of the Button Class.
If I run the code manually (rather than calling the subroutine from from within another subroutine) it runs without error but if I call it from within the subroutine that copies sheets from the original workbook to a new workbook I get the error. Any idea why this might be? What I might be doing wrong? The code for this subroutine is as follows:
Sub CreateButton() Dim btnMyButton As Button Set btnMyButton = ActiveSheet.Buttons.Add(460, 75, 140, 30) btnMyButton.Caption = "Delete and Update Charts and Lists" End Sub
I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...
VB: Sub GetRangeName() Sheets("TOTAL").Select
[Code].....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username
I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click() Dim filepath As String filepath = Range("A100") MsgBox ("File Appended") Workbooks.Open (filepath) Windows("CorrespondenceMaster.xls").Activate Sheets("Sheet2").Select Range("DesNo", "LocationPath").Select Selection.Copy Windows(filepath).Activate Range("A2").Select ActiveSheet.Paste End Sub
I have a sheet that will force user to enable macro before revealing the sheets and enabling them to key in data. But because I need to protect the workbook from user deleting sheets and also having some locked cells. I got the run-time error 1004 unable to set visual property of worksheet class
Is there a limit on the amout of pictures you can use with the statement me.pictures.visible? Reason being, I am trying to import 119 pictures into a spreadsheet. When the information is selected form a drop down list, it pulls up the 1 of the 119 pictures. I was able to get 54 pictures input. Everything was going great until the 55th. When it stared giving me an error... ______________________________________________ Runtime Error '1004':
Unable to set the Visible property of the Pictures class ______________________________________________
When I select Debug, it takes me to the line with Me.Pictures.Visible = False
Everything seems to work fine until I enter the 55th picture. If it is that, is there a viable work around?
the problem I'm having is that when trying to copy the value of cell A2 and paste it in cell A4 with (INSERT with the second button of the sheet). this give me the error RUN TIME ERROR '1004 '.
Getting a error message when opening a workbook "Runtime error 1004" I dont know much about excel and the user explained it to me as best she could . Here is where the script bugs:
I'm trying to create a macro that will take a worksheet from an Excel workbook, and save it as a text file, with the name determined from user input, and the location being the desktop of the currnet user's computer.
First I use a function, (provided by RoyUK), to get the name of the current desktop, then I try to use that name, along with my user input, so save the file. Obviously, it's not working, or I wouldn't be here. I get a "Run-time error '1004': The file could nto be accessed". I think it's just a syntax issue with the file name, because debug takes me to the "SaveAs" portion of the macro.
Im almost finished my first code where the basic idea was to make activecell.name=activecell.value in the first column for the first 3 sheets. After messing with it i figured i couldnt have spaces in the cell name...then i learned i couldnt have random '()-'/ either. So i have the code formatted to do that and then its supposed to call to rename everything as well. but after the 1 sheets column is renamed the 2nd sheet gets error 1004 when range("A3").select is hit. What gives?
This is what ill be using the code on
[URL]
Here is the code
Code: Sub RemoveChars() ' Works through first 3 sheets ' Sheets(1).Select