Any "number pad" control, like a calculator key pad, that can be dropped in as a control object in a userform or spreadsheet? I have looked around and can't seem to find one, creating one seems a bit daunting.
View 9 RepliesWith reference to Cash Register example that I downloaded from Roy Cox; is it possible to link the numerical keypad that is created in the file to the PC Keypad.
I realise I would need to use keypress functions but am unaware of the ascii for these keys. Also; how do I limit that the keypad writes it to the label? Otherwise, would I need to create a new userform instead of what was created by Roy.
I am trying to store some information in a cell from a UserForm. The two sets of information I have are:
InvoiceNumber(number with no decimals)
InvoiceAmount(currency with two decimal points)
The problem I get is when I use the following command to store the information, it stores the information as text rather then a number.
Worksheets(CustomerName).Range("C" & Position + 1).Value = InvoiceNumber
Worksheets(CustomerName).Range("E" & Position + 1).Value = InvoiceAmount
I tried using the NumberFormat option as below, but it doesnt fix the problem.
Worksheets(CustomerName).Range("E" & Position + 1).NumberFormat = "$#,##0.00"
Worksheets(CustomerName).Range("C" & Position + 1).NumberFormat = "0"
I'll try to explain this the best I can. What I have here is a time study. Teachers (which are the control numbers) fill out bubble sheets, then I run them through a scanner. After dissecting the data from the scanner and formatting it to my liking i get this below.
Each teacher/staff member fills out three sheets per quarter. Each letter (bubble) counts as a 0:15 min period of time. Only K thru Q counts as billable time, which I've created a formula to count those letters (column 3). But to be countable each control number has to have three cycles 201,202,203.
So I need something that can take each control number that has three cycles and add their # of 0:15 together.
The italic row below only has one cycle for that control number, so that needs to be deleted or ignored.
Ultimately I would like the results on a separate sheet.
This is only a part of the file, there are over 1000 different control numbers.
I'm using combo boxes. Initially I used combo boxes from the Forms toolbar, however the text in the combo box was to small. Now I'm using combo boxes from the Control tool bar. However, i would like the link cell to show the number of the entry in the list (like the forms control box) and not the actual entry. Is there an option I need to select in properties, or is there some VB code I can attach to the combo box ?
View 4 Replies View RelatedI'm trying to copy data from one sheet to another sheet automatically based on a number selected in a drop down control.
I have used OFFSET to pull some information successfully from a list. This is easy for me to do with single entries and a list and has worked well. I want to do similar but with a dataset not just single cells.
But, I can't seem to make OFFSET work to show a set of data easily.
Perhaps I will need VB code to do so? Or there is another control I'm not aware of? I've done very little with VB.
I'll attach a sample file to try to show better what I'm trying to do.
Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?
View 9 Replies View RelatedI have created a userform within VBA which has a TreeView Control and a Spreadsheet control on it.
I have populated the TreeView control with data and what I want to be able to do is to drag the nodes off the TreeView control to the spreadsheet control.
I can drag onto a normal worksheet but not onto the spreadsheet control (the no drop mouse pointer keeps showing).
How do I determine which control the user is currently modifying on a multipage form (either changing, enterying or exiting the specific control). when I use "userform1.activecontrol" i get "multipage1" as the control name but I need the actual control on the specific active multipage. (also the .TABINDEX is for the multipage regardless of the on-page control) I use a generic data-field change SUBroutine so need the control name (and the TABINDEX) to provide my SELECT CASE. (so every fieldname_CHANGE calls the same SUB [with no parameters])
View 3 Replies View RelatedI've been trying but excel does not seem to recognise x and y
so here it is
2* X = Z
Where 2 is changable
X = Z-2
Now i just want to find what Z is.
Here's an Example
1.3x - z
1.3(x-.06) = z
1.3z - .078 = z
1.3z = z + .78
1.3z-z = .78
.3z = .78
z = .78/.3
z = 2.6
I am hopeless at remembering birthdays tbh - so rather than rely on family to remind me, I decided to make a spreadsheet that shows: D.O.B, current age (in years, months, days), and number of days remaining until next birthday.
Please see attached - I can't figure out why the current age calculation is a month out. e.g 'Sebastian' was born on 16 Nov 2008, which makes him 3 months and 11 days old - but '=TODAY()-C16' yields "00 Years 4 Month(s) 12 Days"
Also, 'Leah' has just her birthday - but now where it is supposed to give 'days until next birthday' it gives an error with the formula: '=DATEDIF(TODAY(),EDATE(C4,(YEAR(NOW())-YEAR(C4))*12),"d")'
I'm building a freight calculator and am considering some professional consulting options, but before I do that I wanted to see if I could overcome this one problem. If I can, I think I might be able to complete the calculator myself.
Here's my conundrum:
A potential customer enters "80802" for zip code and "Solomon" for store.
StoreLocation_________ City_______ State_____ Zip______ Distance
Solomon__________ Arapahoe _______CO ____ 80802_____ 270
Garden City_______ Arapahoe_______ CO _____80802_____ 143
The formula (or series of formulas) I'm looking for would then refer to the following hidden sheet and return Arapahoe, CO and a distance of 270 miles from Solomon.
i made a claculator in vb.net, and now i have to make one in vba, what i did was as follows, first ill post the code from last year, then my vba attempt;
View 14 Replies View RelatedI'm trying to come up with an efficient formulae or function to calculate tax
The problem I have is that the tax is progressive. As below
the first 20,000 is taxed at 5%
the next 20,000 is taxed at 6%
the next 20,000 is taxed at 7%
the next 20,000 is taxed at 8%
the next 20,000 is taxed at 9%
more than 100,000 is taxed at 10%
I'm trying to do a formula like below
Cell B3 is my taxable amount
Cell B5 =IF(B$3>20000,20000*0.05,B$3*0.05)
Cell B6 =IF(B$3>40000,40000*0.05,(B$3-20000)*0.05)
This gives me a problem in that for 35k say, I end up with a negative number for the second part in cell B6. My other issue is that each calculation will take up 6 rows on my
spreadsheet. I was hoping to set up a function that could do this in a cell, but even the simple stage defeats me at the moment.
See workbook attached.
I'm looking for help to detemine rates so it automates in the sheet.
Can you give me assistance and code perhaps ? I'm pretty basic at V-Lookup and If functions. Is this the best route to take ?
All is explained within the workbook.
Creating a calculator for employees and possibly customers to use to return values based on information inputted. Created a worksheet but thought there may be another way to enter and return the calculated information that may be more user friendly. New to user forms but thought that would work for the user to enter information. Can information be returned from the worksheet to the user form?
View 2 Replies View RelatedI downloaded the calculator toolbar, and for some reason it doesn't look right, it doesn't resemble a calculator layout at all.
The numbers are skewed, as though the layout is in landscape view instead of portrate. I've tried repeately to delete it from the toolbars menu option, with no success. It's become annoying.
Is there a way to build a 12 digit calculator in excel?
View 9 Replies View Relatedim trying to put together a system on worksheets that checks 'Absence' in a rolling 12 month period. The 12 month period is any 12 months and not a financial period (eg 25/12/06 -25/12/07).
I have 36 employees and want to have their names in each sheet, calander dates across the top, will mark either a 'S' for sick or 'L' for late ect against the dates if not at work.
Once an absence has been entered, on the sheet somewhere it will show how many days that person has been off (eg, 10th Oct, 16 Nov and 22 Dec would = 3 Days absence).
How do I set up the sheets to work out how many days each person has had off in a rolling 12 month period (so that it does not calculate beyond the 12 months).
I have looked on here to see if there are any programs, formulas which may work but some have lost me in my tracks.
I am trying to put together a spreadsheet that works out values based on a persons age or service length.
So in I have the following data in columns starting at B4 and ending at k4:
Date of birth; start date; text; text; text; text; Weekly Pay; Start age; Current Age; Years Service.
The formula I need to provide in l4, m4 and n4 comes from the following rules:
* 0.5 week's pay for each full year of service where age during year less than 22
* 1.0 week's pay for each full year of service where age during year is 22 or above, but less than 41
* 1.5 weeks' pay for each full year of service where age during year is 41+
So in l4 I have:
=IF(J4
I'm working on a 4-week billing calculator. I rent equipment on a day,week & month rate system. For example: Equipment 1 rents at $30 Day, $90 Week, & $270 a month. If you keep Equipment 1 for 4 days the calculator computes 4 days at a total of $120. The way a 4-week cycle works is the customer will receive the cheaper rate once the daily rate meets or exceeds the weekly rate.
So instead of $120 for 4 days, the calculator tells me to bill him for 1 week at $90 instead and the customer essentially will get the following 3 days at no extra charge until the cycle starts over. As the cycle continues, the same rules apply for the monthly rate in relation to the weekly rate & daily rate combined.
Once the weekly + daily rates add up to equal or more than the monthly, then the monthly rate is used and that's what the customer pays. What I'm trying to do is make a calculator that I input the rates and the rental period and the spread sheet will tell me (based on those rules) how many days, weeks and/or months the customer needs to pay and how much his total dollar amount will be.
Not sure if this is do-able but I figured I would try. For a golf league coming up later this year I want to figure out how many Birdies, Pars, Bogies, Dbl. Bogies and Others each (20) golfers have during the season. After each round I would input their scores and I am looking for a program that would look at the score of the hole and the par for the hole and figure out what they got 1 under par = birdie, even par = par, 1 over = bogie, 2 over = dbl bogie and 3 over = other.
I started by creating a simple if statement but it ran out too long and my other issue is adding up the number of birdies, pars..etc for each round. Meaning a golfer can have bogies on hole #1 and #2 and the if statement can take care of that but how would get a total saying the golfer had 2 bogies.
Something like this with the - meaning a column.
birdies Pars bogies dbl bogies others total holes
4 - 5 - 3 - 4 - 4 - 5 - 6 - 5 - 8 1 4 2 1 1 9
I would do this each week and total the number of each to keep a running total at the bottom of each column. We play on the same course each week so the pars for each hole can be hard coded.
I'm building a calculator of sorts for dates. I have a start date in A1. Next to the start date I have a list:
10 days from -start date- is:
15 days from -start date- is:
20 days from -start date- is:
and so on...
I need a formula to return a date that is however many days specified from the start date. If that date lands on a sat or sun I need it to return me the date for the monday after. For example, if my start date is 10/15/09 (thursday) and 10 days from that is 10/25/09 (sunday) I need it to return the date of 10/26/09 (monday). I also need it exclude a range of holidays i have listed.
I've been trying to create a Staffing calculator for a call center. Basically the calculator should be able to add up the number of agents for the next 18 intervals based on the login time that is entered by the user. I've just outlined the functioning below:
Suppose 10 agents login at 8 AM (thus logout at 5 PM), the intervals right from 8 AM till 5 PM should show up the 10 agents. Now suppose 10 more agents login at 9 AM, we would then have 20 agents logged in till 5 PM (since agents logged in at 8 will logout at 5) & the remaining 10 till 6 PM. Thus if we have 10 more agents logging in at 10:30, we will have 30 agents till 5 PM, 20 till 6 PM & 10 agents till 7:30 PM & so on. I have attached an excel file to explain the example & the way the calculator has to be built. It is preferrable that the cells containing the login time aren't fixed, but the user should be able to input any login time in any cell.
Attached is sample data. Target payout is the amount of the base salary a salesman can earn if all goals are reached. Commissions are payed quarterly. Listed on the left are 7 goals, each with a weight of importance toward the target payout amount. The percentage achieved can only be 100% or 0%, nowhere in the middle, although they are allowed to make up a goal later if they do not make it at first. This is where I get stumped. For example, if they don't make a goal in quarter one but make the goal in quarter two plus what they missed in one, they get two quarters worth of commission in quarter 2 for that goal. I am having trouble figuring out the easiest way to go about this.
View 2 Replies View RelatedI need to create a calculator that tells me how long a invoice will take to be paid using my current processes at work, working days only.
I need to imput the date the invoice is received and then for the rest to be worked out automaticly
I need it to do the follwoing ....
Not sure if this is the correct section for this kind of query but I'd like some assistance with a calculation that I can't seem to figure out.
Essentially it's for calculating night payments for our employee time-sheets. Our staff have very sporadic shifts and are paid extra for working between the hours of 00:00 and 06:00, basically when employee's enter their start and end times I'd like the spreadsheet to automatically calculate how many hours they have worked between those hours, I imagine it's very simple but I cannot figure out which function to use.
To complicate matters, because staff can work shifts which start on one day and finish the next we work on a 48:00 clock basis so its' not only between the hours of 00:00 - 06:00 where they qualify for night payments but also from 24:00 - 30:00 if that makes sense?
I am looking for a good and simple formula to calculate vacation days.
View 2 Replies View RelatedI would like a user friendly form where I could enter
£50 15% discount and it would add 50% plus VAT and produce POR & POC which would adjust if the suggested price was changed.