When I type in a cell it will repeat what I have typed multiple times within the same cell. For example, if I type x, as soon as I move out of the cell it will become xxxxxxxxx. I have checked all of the formatting of a cell that works fine against these ones and they are identical, there aren't any formulas.
View 5 Replies
I use this to read cell content, add some text/characters (ie. [ and ]) and change the properties of the complete cell
Sub COMMENT()
Worksheets("DVD Lijssie").Activate
If ActiveCell.Value 0 Then ' Change all in to ... ... ...
ActiveCell.FormulaR1C1 = ActiveCell.Value & " " & "]" & " " & "["
With ActiveCell.Font
.Name = "Arial Narrow"
.Size = 8
.ColorIndex = 16
End With
End If
End Sub
HOW can I change this vba-code so it leave's the content of the cell like it is and add some content with the use of let's say TexBox1 and ONLY use different font properties for the newely added content?
Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
For a table like the one below produced for the sake of example (actual is much much bigger) I want to make it list rows that are true for a certain column for a certain variable in the matrix. So for say water terrain, which types of activity can I do i.e. swimming. Or for Offroad the activites which I can't do i.e. Run and Swim.
ActivityWaterRoadOffroad
Jog nym
Run nyn
Walk nyy
Swim ynn
y=yes
n=no
m=maybe
I am using VBA to create a word document (.docx). This word document contains plain text content controls as well as picture content controls. I then use VBA to automatically select a picture based on the code below
Code:
Set oCC = Word.ActiveDocument.SelectContentControlsByTitle("TabPic").Item(1)
On Error GoTo TabErrorHandler
oCC.Range.InlineShapes.AddPicture Filename:="X:XFERANDREW-TDCD " & LblVL &
[Code].....
After the document has been closed down I try to open it again and I am told "The file cannot be opened because there are problems with the contents."
When I click details it says "Unspecified error" and "Location: Part: /word/document.xml, Line: 2, Column: 0"
If I click ok it says "Word found unreadable content in "". Do you want to recover the contents of this document? If you turst the source of this document, click Yes.
Clicking Yes opens the document with all the contents and it is now renamed to Document 1. If I click no it does not open.
how to combine the content of 2 cells into one cell and have the information separated by a comma.
For example:
CELL 1:
Software 1
CELL 2:
Spreadsheet Software
The desired results is:
CELL 3:
Software 1, Spreadsheet Software
How to determine the correct formula for this requirement?
Assuming I have 2 individual excel files and an index excel file (in reality, there are more than hundreds of file). For index excel, once the user enter part number (eg. 1 or 2), the excel will look for the part number excel file and determine vlookup function.
The only problem I have here is I can not make the index file automatically add the part number shown on most left column into the required formula (replace the part number file section).
I tried use the indirect function but this require each file to be opened, which is not possible for actual use. I am looking for a function that can work in closed worksheet.
Attached files :
index.xlsx‎
1.xlsx‎
2.xlsx‎
I am working on developing QR Codes using some MATLAB code and it would be really convenient if I could create an excel program which changed the background color of a cell containing a 1 to black and a cell containing a 0 to white.
View 2 Replies View RelatedI am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B
XXXX PRODUCT 1
YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
multiple search match and replace content in a different column so for example
new workbook (look up table)
sku
search1
search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?
I have the names of companies in one column, and the amount they owe in cells in the column beside them. I then have a second list of companies that is a subset of the first. Is there a formula that would place the amount they owe in teh corresponding cell adjacent to the compny in the second list? I've attached a sample workbook, Full Company List in column A, amount owing in B, trimmed down list in D and ideally I'd like the corresponding values in E.
View 3 Replies View RelatedI have 2 worksheets, let's call them "Sheet1" and "sheet2".
Sheet 1 has 2 columns (A, and B)
Ie. "Sheet1:"
Col A, Col B
Red
Green Yes
Blue
Yellow
Orange Yes
For each entry in Column "B" that has a "Yes" value, I need to copy the color value in column "A" into the next available empty cell in "Sheet2" in column A.
"Sheet2"
Col A, Col B
Red 3
Blue 5
Yellow 6
Final Result:
Col A, Col B
Red 3
Blue 5
Yellow 6
Green
Orange
how to do this particular challenge? For Sheet2, I think I'll need a function to determine the first available blank cell in column A.
What I need to do is have a cell that will be say yellow until there is information put into this cell. The information could be in the format of text or numbers. The information would not always be the same so it would need to be yellow when there is no information in the cell and another colour or white when there is information in the cell.
View 6 Replies View RelatedI have a sheet that I fill out with customer data then print and start over with the next customer. This requires me to tab and delete through the sheet before starting the next entry and I am wondering if there is some way to auto clear the unlocked cells based on a single entry IE when we entered new data in the 1st field this would clear the unlocked cells and make them ready for new data?
View 14 Replies View RelatedThis formula counts the number of spaces between words in a cell:
View 5 Replies View RelatedI have a file consisting of two columns, called, "bom ref" and "material"
I need to show the data as indicated in the file, headed required format required.
In effect where I have a 0, that is the material I need to show for every row with a bom ref. of 1,2 or 3, down as far as the next 0 but not including the 0, when I reach the next 0, the material is a new letter, and that letter needs to repeat down as far as the next 0, but not including the 0 and so on.
I need a macro or formula that can parse a column of data and if it finds a specific string of text ,then it changes another cell on that row to zero. It can have multiple text variables but all return the same value. For Example,
if
artisan - matte - flat black
artisan - matte brushed gold
small - canvas - flat black
is found in a longer string of text
then it should change another cell on the same row to have a value of 0. Also i should mention that i need it to loop as it will be parsing through potentially thousands of rows.
I have a cell A1 in sheet2 linked cell A1 in sheet1 (simply A1='sheet1'!A1). A1 in sheet1 is a data validation drop down menu.
I want to clear the content of A2 in sheet 2 everytime the content of A1 in sheet2 changes/is updated. That is everytime the value of A1 in sheet1 is changed using the drop down menu.
I tried using a Worksheet_Change event macro (which I do not fully understand) but it won't work with a cell that updates from a calculation. It also doesn't work if triggered from a cell from another worksheet (I tried linking it to cell A1 on sheet1 in this case).
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("A1")) Is Nothing Then Exit Sub
If Target.Count > 1 Then Exit Sub
Range("A2").ClearContents
End Sub
Any simple solution to clear the content of cell A2 in sheet2 when A1 in sheet2 updates?
I need to copy a cell content to a Comment into another worksheet in
the same cell ref.
sheet1
A1 = apple
A2 = orange
Sheet2 - target
A1 = comment (apple)
A2 = comment (orange)
I have a chart full of different names which I need to separate them by color when a specific entry is found in a Cell. For example the list has the store name "ZELLERS" + its branch number. (ex. ZELLERS #276 PL or ZELLERS #295 SL and so on). I would like to modify the below code so that It only check for the name ZELLERS and not the branch number. If it finds ZELLERS in any cell In the Range of C1:C500 then color it Red.
Below Code does that but I have to write the exact name as it appears in the cell otherwise it wont find it for me. Is there any way to resolve the issue? I am not an Excel Programmer but Only an Excel user.
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)
Set r = Range("C1:C500")
If Intersect(Target, r) Is Nothing Then
Exit Sub
End If
On Error GoTo Endit
Application.EnableEvents = False
vals = Array("ZELLERS #276 PL", "ZELLERS #295 SL", "Gopher", "Hyena", "Ibex", "Lynx")
nums = Array(3, 46, 6, 3, 7, 4, 20, 10, 23, 15)
For Each rr In r..........................
How Can I Get First Cell Content ? here is my sheet
.... A
1 Color
2 Red
3 Blue
4 Yellow
note : Color has filter
I want to make the cell B1 = first cell of column A - I try type in B1 =A2 ، but when i make filter (example i select blue) the cell B2 show nothing (i want B1 to show the filtered data on first column )
I have been supplied a list of names. The format is Smith J Mr, I would like this to read Mr J Smith.
Is there a command in excel I could use?
I am looking for a vba to offset the cells.
The code I have currently is:
[Code] ........
This is only moving the selected cells across one, however - the content of the cells is what I wish to move so cell C25 has data pointing to another sheet cell A1 i.e. =Sheet1!$A$1 - can I edit this code so it alters the cell to reference B1, C1 etc....
I want a macro to show a message with a content in the cell B3.
For EG: "Rec as of 'B3' is created"
This has to be the message and 'B3' has to be the content in the cell B3.
I tried doing it but i am unable to show the content in B3 in the message.
I have 10000 data in my column A. i can genterate random number from 1 to 10000 through function "randbetween".
Now i want to display the particular data which column a and row as per that random number. in short i want to display data of "column A row (generated random number) for lucky draw selection.
I am attempting to use a cell reference generated using the "address" function and text function (so the cell displays text only, not formula) as a means of defining the top left cell into which I want to paste a column of formulas. The reference cell is static, but the contents is dynamic.
View 3 Replies View RelatedI have a named range (D:16 F:800) called “NameRange” which contains names.
I’d like to create a macro which offsets a letter “x”, 10 columns to the right everywhere that name appears within the range. As an example: If I’m trying to find the name Tom, A dropdown menu shows the name “Tom” ( which I’ve created) whereby it calls upon a script to search within the named range from this:
Bob Kim Tom
Tom Sue
Mary Bill Ted
Tom Sue Bob
Fred Bill Sue
Bob Tom Kim
and offset “x” to look like this:.......
Cell A1 needs to contain the contents of A3 without the user having to go and type the entry in each time the next cell along changes.
For example, let's say that last week 1.81 was typed in A2. The user then had to go in to A1 and also type 1.81. This week 1.83 has been entered in A3 so the user will manually have to go in to A1 and type 1.83. Next week when something is entered in A4, the contents of A1 will again need to match the contents of A4 and so on for the next 52 weeks. We'd like a formula in A1 that automatically shows the contents of the next cell along as soon as the content exceeds Zero.
A1 A2 A3 A4 etc
1.81 1.81 1.83 0.00
I have done a search on the forum for the performing this task and I have come up with the following ....
View 9 Replies View RelatedI am trying to find something that will let me look at a Log Book Page (a Worksheet). I need it to look through Cells E4 trough E15 I want it to look for the 1st entry of 3 different materials.
3/4" Plywood
1/4" Plywood
3/4" Particle
These names are in a drop down menu from a different sheet in the same work book
Sheet Name link '.'!
'.'!A2 3/4" Plywood
'.'!A3 1/4" Plywood
'.'!A4 3/4" Particle..............
