Multiple Find And Replace Cell Content Based On Another Cell?
Mar 25, 2014
multiple search match and replace content in a different column so for example
new workbook (look up table)
sku
search1
search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?
I have a file consisting of two columns, called, "bom ref" and "material" I need to show the data as indicated in the file, headed required format required.
In effect where I have a 0, that is the material I need to show for every row with a bom ref. of 1,2 or 3, down as far as the next 0 but not including the 0, when I reach the next 0, the material is a new letter, and that letter needs to repeat down as far as the next 0, but not including the 0 and so on.
Been trying to work this one out and have ended up banging my head against the wall.
Basically I have a spreadsheet, in the first column is the person's name, in the secon which team they are in and following this a cell for each day of the month with their availability.
The team name is a selection from a list, the availability is 1-6 (different levels of availability)
I'm trying to do subtotals at the bottom for each separate team, so the very last row each of the cells for each is added up:
Name Team 1st 2nd 3rd 4th 5th 6th 7th etc. Mr X ___1st___1______2__1 Mr Y ___2nd_______2________5__5__5 Mr Z ___1st___1____________3__3__3
Total 1st: 2 2 1 3 3 3 Total 2nd: 2 5 5 5
So basically the formula in the last row goes along the lines of:
Add each cell in the column IF the team name = 1st
Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
How to determine the correct formula for this requirement?
Assuming I have 2 individual excel files and an index excel file (in reality, there are more than hundreds of file). For index excel, once the user enter part number (eg. 1 or 2), the excel will look for the part number excel file and determine vlookup function.
The only problem I have here is I can not make the index file automatically add the part number shown on most left column into the required formula (replace the part number file section).
I tried use the indirect function but this require each file to be opened, which is not possible for actual use. I am looking for a function that can work in closed worksheet.
I am working on developing QR Codes using some MATLAB code and it would be really convenient if I could create an excel program which changed the background color of a cell containing a 1 to black and a cell containing a 0 to white.
I am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B XXXX PRODUCT 1 YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
I have a sheet that I fill out with customer data then print and start over with the next customer. This requires me to tab and delete through the sheet before starting the next entry and I am wondering if there is some way to auto clear the unlocked cells based on a single entry IE when we entered new data in the 1st field this would clear the unlocked cells and make them ready for new data?
I have a cell A1 in sheet2 linked cell A1 in sheet1 (simply A1='sheet1'!A1). A1 in sheet1 is a data validation drop down menu.
I want to clear the content of A2 in sheet 2 everytime the content of A1 in sheet2 changes/is updated. That is everytime the value of A1 in sheet1 is changed using the drop down menu.
I tried using a Worksheet_Change event macro (which I do not fully understand) but it won't work with a cell that updates from a calculation. It also doesn't work if triggered from a cell from another worksheet (I tried linking it to cell A1 on sheet1 in this case).
Private Sub Worksheet_Change(ByVal Target As Range) If Intersect(Target, Range("A1")) Is Nothing Then Exit Sub If Target.Count > 1 Then Exit Sub Range("A2").ClearContents End Sub
Any simple solution to clear the content of cell A2 in sheet2 when A1 in sheet2 updates?
I have a chart full of different names which I need to separate them by color when a specific entry is found in a Cell. For example the list has the store name "ZELLERS" + its branch number. (ex. ZELLERS #276 PL or ZELLERS #295 SL and so on). I would like to modify the below code so that It only check for the name ZELLERS and not the branch number. If it finds ZELLERS in any cell In the Range of C1:C500 then color it Red.
Below Code does that but I have to write the exact name as it appears in the cell otherwise it wont find it for me. Is there any way to resolve the issue? I am not an Excel Programmer but Only an Excel user.
Option Compare Text Private Sub Worksheet_Change(ByVal Target As Range) Set r = Range("C1:C500") If Intersect(Target, r) Is Nothing Then Exit Sub End If On Error GoTo Endit Application.EnableEvents = False vals = Array("ZELLERS #276 PL", "ZELLERS #295 SL", "Gopher", "Hyena", "Ibex", "Lynx") nums = Array(3, 46, 6, 3, 7, 4, 20, 10, 23, 15) For Each rr In r..........................
I am trying to create a formula that will compute a variance between the numeric value in a given cell with the value in one of 3 other cells depending on the condition of the 1st cell. Example: If the Value in cell F4 has a condition defined as "PMR" in cell C4, subtract the value in cell F19 from F4. If the condition is defined as "DBR" in cell C4, subtract the value in F20 from F4. And if the condition is "OTH", subtarct the value in F21 from F4.
I have tried to these through formulas without success but i think i need VBA also which i am not very experienced.
I want to paste a list in the "InsertList" sheet. This list will only contain the word "Correct" or "False". From then on i need a way to search for the word "Correct" or "False" in the columnS P,Q,R,S,T,U,V.
e.g. If in the column "P" on the "InsertList" sheet the word "Correct" is found, i need that entire row from A to V to be copied onto it's destination, in this case "sheet1".
If the word "Correct" is found on the column "Q" on the "InsertList" sheet, the rows from A to V need to be copied in the Sheet2. And so on..
I would like to be able to find all cells in row 2 that are "greater than 0". Then I would like to return the coresponding job number in row 4. I need to create a list of each job with the number of hous spent on that job next to it. I may have 30 different jobs but only 5 jobs that have hours for the specific week.
How I attemted to solve this is to create a table that listed all the hours from the largest number in row 2 to the smallest. Then I found the job number corresponding to that number of hours. The problem with this meathod is that if two jobs have the same amount of hours then the first job number is returned for both values that are the same. See attached example.
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
I have a named range (D:16 F:800) called “NameRange” which contains names. I’d like to create a macro which offsets a letter “x”, 10 columns to the right everywhere that name appears within the range. As an example: If I’m trying to find the name Tom, A dropdown menu shows the name “Tom” ( which I’ve created) whereby it calls upon a script to search within the named range from this:
Bob Kim Tom Tom Sue Mary Bill Ted Tom Sue Bob Fred Bill Sue Bob Tom Kim
I have a file that I import into excel and append to the end of the last free position, However my totals are slightly out when compared to the main system.
I have found the reason why, they randomly slips in a Credit or credits.
So I have the scenario column P has a txt field and the majority of the time it has SI (Invoice) however when they issue a credit the txt becomes SC.
The annoying bit is that Column L has a value but it is not a negative number i.e. 75 where it should be -75
I can do an iF then and find the SC or SC's and I can place some text in Column L but I would like to be able to take the value in L and make it a negative number.
I am trying to search the cells in Column A around rows 54 to 77. And if the cell says "Yes" it should hide the row. I think I'm on the right track, but can't seem to get it work.
I am working on a spread sheet for work were we have to test certain items on certain days, e.g. one item needs to be tested every Tuesday & Thursday, when the test is completed you click on a drop down box and click on completed or in progress.
What I would like are a couple of things to happen as follows:
A message box would pop up when you open the file to inform the employee that the test is due today only on Tuesday & Thursday if not completed or in progress from the drop down box. Once you select completed or in progress from the drop down box the message box no longer appears. Every Tuesday & Thursday when it's first open it deletes the cell content, thus triggering the message box test is due today, and once completed or in progress it no longer appears until next Tuesday or Thursday.
The spread sheet is on shared drive and used by several users, let's just say cell A1 is the cell I have the drop down box
I have a drop down list made from the Forms toolbar with a list of items: 1, 2, 3, 4, 5. I have set it with a linked cell, so when you choose, say 3, from the dropdown, 3 appears in B10.
I was hoping to add a 'Go' button, which would run another macro depending on what is in B10, i.e. so if 3 was chosen, then you press 'Go', Macro3 would be run.
So I have 5 macros called Macro1 - Macro5, and I need some code for the 'Go' button which will run the right macro depending on what number is in cell B10.
As part of a macro i do a find and replace on a range cells that replaces "/1" with nothing (""). Therefore 2/1 becomes 2, what i don't want though is if the de-nominator includes a 1 but not only 1 to keep the whole of the de-nominator, say 8/11 does not want to become 8/1.
I have standardized each existing worksheets and any new worksheet to have certain parameters. The purpose of the Macro requested is ensure these worksheets are sorted alphabetically (and only these worksheets). The code I have been working with is contained below. It is working as expected but now I need to incorporate a statement which places the following condition:
Sort worksheets only if A3 has cell value of eCRF NameIgnore worksheet name: TOC & ENTER ECRF NAME
VB: Sub Sort_Tabs() 'declare our variables Dim i, j As Integer
I want to format a range of cells based on the name listed in a cell in column A (starting @A6). I currently do this manually. It is to help me visually see the line I am working with and for what person.
I am almost certain that is going to take a VBA, but I know little to nothing about setting one up.
I just ordered vba for dummies, in the meantime I will have to get my info from the experts on this board. I want to use a name I have in a cell in a msgbox routine.
