Inserting Values In Cell Depending On Content In Adjacent Cell
Mar 20, 2014
I have the names of companies in one column, and the amount they owe in cells in the column beside them. I then have a second list of companies that is a subset of the first. Is there a formula that would place the amount they owe in teh corresponding cell adjacent to the compny in the second list? I've attached a sample workbook, Full Company List in column A, amount owing in B, trimmed down list in D and ideally I'd like the corresponding values in E.
View 3 Replies
ADVERTISEMENT
Jul 24, 2008
I'd like help writing a single formula that assigns either a numerical 1 or 0 to a cell based on values from two other cells.
By way of background, I'm working with three columns. Cells in column F contains values from 1 to 4. Cells in column G contain values from 5 to 11. Cells in column H are currently blank.
I need a single formula that will insert either a numerical 1 or a 0 into column H according to the following conditions.If F3 = 1 and G3 = 5 or 6 or 7 then let H3=1 otherwise let H3=0
If F3 = 2 and G3 = 7 or 8 or 9 then let H3=1 otherwise let H3=0
If F3 = 3 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0
If F3 = 4 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0
View 11 Replies
View Related
Nov 19, 2008
What I need to do is have a cell that will be say yellow until there is information put into this cell. The information could be in the format of text or numbers. The information would not always be the same so it would need to be yellow when there is no information in the cell and another colour or white when there is information in the cell.
View 6 Replies
View Related
Mar 6, 2009
I have a file consisting of two columns, called, "bom ref" and "material"
I need to show the data as indicated in the file, headed required format required.
In effect where I have a 0, that is the material I need to show for every row with a bom ref. of 1,2 or 3, down as far as the next 0 but not including the 0, when I reach the next 0, the material is a new letter, and that letter needs to repeat down as far as the next 0, but not including the 0 and so on.
View 4 Replies
View Related
Jul 14, 2009
on sheet1 cell a1 is there a way to make sheet1,s name appear as the contents of cell a1
View 9 Replies
View Related
Jan 4, 2007
With code I enter text by double clicking in any cell in a range.(column A,B,C are excleded)
What I need is to clear the content of the cell adjacent to the left of the one I choose to dbl click AND the one below that.
Example: I dbl click in E1 and the content of cells D1 and D2 is cleared.
View 9 Replies
View Related
Jun 26, 2008
I have a list of sales enquiries 1600 rows long. Each has a brand recorded in cell J (from j4 above is headers)
I have 4 brands
A, B, C & D
I would like to copy the data from the master sheet into 4 tabs lables A, B, C & D depending on the brand recorded in J
View 9 Replies
View Related
May 1, 2008
I have a template I have been asked to amend and I know I need to use Conditional Formatting I just can't crack the formula I need to use. Cell A2 will have either "CD" or "CW" or "IN" input into it
When user inputs either "CD" or "CW" into cell A2, I want cell G2 to have "Margin Movement" automatically displayed. When user inputs "IN" into cell A2, I want cell F2 to have "MV" automatically displayed, and I want cell G2 to be coloured in bright red fill. Then user is to go to cell G2 and input some text as a description, and I want the red fill to disappear once they have input something in there.
I thought I had it licked using IF statements for the "Margin Movement" and the "MV" cells, but I can't get the conditional formatting to work - I assume this is because the cells aren't technically "blank", as they have IF statements in them.
View 3 Replies
View Related
Mar 20, 2014
I have six complex functions, which I would like to place in [A2] depending on what is placed in [A1], The functions themselves are quite extensive and I don't want to use any active functions (like INDIRECT) as this will cause slow calculations. [A1] will just be a given name to each of these functions.
View 3 Replies
View Related
Jun 5, 2014
I request you to write a code for me to fill the cell values as "Not Applicable" in Column "AZ", if the "B" Column cell values = "Justified", "Approved LSAR" & "Approved SDAR".
I have attached the work book of what I am trying to accomplish.
View 14 Replies
View Related
Oct 27, 2009
Here's an example of what i'm working with,...
Range is C40:D48
View 4 Replies
View Related
May 31, 2014
See the attached excel table. I need the cell E4 to keep adding the values typed in the cell D4 on daily basis.The cumulative shouldn't be changed if there is no value in the cell D4. E4 should accumulate and keep the totals typed in D4...
Cumulative Input.xlsx
View 5 Replies
View Related
Nov 10, 2012
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies
View Related
Feb 20, 2014
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
View 4 Replies
View Related
Mar 22, 2009
I have data in two columns
Column A has values with names like -
John, Paul, Hena, Kumar, Paul, Hena, John in different rows
Colum B has day values - eg , sun, mon, tue, wed , thu, fri and sat
I want to insert a new column C with formula that returns
1. for every John, concatenate of all the day values adjacent to row of John eg "sunmonfri"
Similarly for all the values in Column A, Column C should reflect the concatenate values of Column B.
View 9 Replies
View Related
May 22, 2014
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
View 4 Replies
View Related
Feb 16, 2007
how to insert the value of a single cell into a text box... is it possible to insert a range of cells into a text box, and keep the same formatting, spacing, control boxes etc?
Reason behind this:
I have some information in a range of cells, let's say A10:D20 and I want to have a nice fill colour for that range... my thoughts were to copy this data into a text box, and use the fill properties to make it look pretty. but I've found that I can't do that..
My next attempt was to set the transparency of the text box to 100%, put some fill in it with a nice orange colour, and place the text box over the cells I wanted to look pretty... When I did this, it worked ok for the cells in the lighter portion of the colour, but when the colour became darker it would block the cell data underneath it...
View 3 Replies
View Related
Oct 23, 2008
I have a workbook with several drop down boxes and formulas already set up and working. I want to improve it though. My question is.... is there a formula that will make the drop down list change based on a cell value....
For example: If B6 equals vegetables then C6 equals list (potato, carrot, pea, etc.) If B6 equals fruit then C6 equals list (apple, banana, grape)
View 6 Replies
View Related
Jan 23, 2004
Does anyone know the code to send an email to a set list of six recipients when cells in a certain column in a worksheet reach a certain value greater than another. Let me explain a little - The action to be performed is date-based.
For Example:
When the date cell L2 is 30 days later than the date in K2, send an email with subject containing data from cells B2 and C3.
However, this has to work for columns K and L in their entirety, as both columns contain a list of dates...
View 9 Replies
View Related
Aug 25, 2008
Depending upon a figure entered e.g. = $ 895.00 and also Depending upon a state being entered e.g. = NSW. Then Excel will lookup a series of cells to produce the correct figure depending upon the correct data ciritera being met. I have a data table sitting behind the spreadsheet with all relevant values.
View 3 Replies
View Related
Dec 5, 2009
i had data in html format.i want the data to be splitted into columns in excel.
HTML FORMAT
Employee name
Emp id
johnabraham wesley peter neiljohn and so on....... 254800 254801 254802 254803
i tried copying the data from html to excel. Then applied text to columns but i m getting incomplete names from this step.
My problem is how would i get the full name in one Column(Column B) & the emp id in the next Column (COLUMN C).Column A will have the data copied from html page. The length of the employee name differs. The only saving tip is that the employee name will suffix with sno like
Johnabraham -1
254800
View 11 Replies
View Related
Mar 12, 2013
I'm looking for a formula to sum three adjacent cell values in a specific row and then sum up all of the rows.
A B C
1 0 2
3 1 2
4 4 0
For example, the value for the above would return 17 = [(1+0+2)+(3+1+2)+(4+4+0)]
View 5 Replies
View Related
Dec 18, 2007
I would Like to define each row in a spreadsheet to the value of the first cell in each row and I have no idea how to go about this.
Code Customer
_0888 Williams
_0435 Smith
So basiclally I would like to name the first row "_0888" being 2:2. But without doing each row manually via Insert --> Names --> Define..
View 4 Replies
View Related
Aug 2, 2007
In what would be Cell E2 I want to post the Total posted set Assuming that the Order Numbers and the OP Numbers are the Same, but only if there is a value in the allowed set, So I'd expect E2 in the case below to read 1.83,
Order No OP Posted Set Allowed Set
30761157 00100.731.500
3076115700100.500.000
3076115700100.600.000
3076461000100.000.000
3076461000101.050.500
3076524400100.000.000
3076524400100.550.500
3076639600100.000.000
3076639600101.180.500
3076810900100.000.000
3076862900100.000.000
3076862900100.000.000
3076862900100.000.000
View 9 Replies
View Related
Nov 22, 2007
I want to change the colour of a cell depending on its value, when compared to another row of data identiified by a value in another cell. To try an clarify:
b3 = 1 b5=4 Because b3 = 1 then compare cell b5 with the row g1 as b3=g1 then depending on its postion set a colour
g1= 1 g2:g5 = 2,3,4,5,6
h2= 2 h2:h5 = 7,8,9,10
View 2 Replies
View Related
Apr 3, 2014
I have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case).
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
View 2 Replies
View Related
Apr 4, 2013
I have a list of data:
2
140
1
660
10
140
0.92
660
2
130
0.18
660
4
510
0.44
820
4
510
I want to have a formula that finds the sum of the values in Col 1 (Qty) for the rows that equal, eg: 140, in Col 2 (Product) So that I can have a list of Products of the Qty that relates to each product. (there are products in increments of 10 from 10 to 920, that is, 92 products)
View 2 Replies
View Related
Apr 30, 2014
In the picture below, I need a formula in column E to count the unique occurrences in column A (excluding blanks) if its corresponding value in column B (B1 value) matches that in column D (B2 value). Currently column E is showing the values I would want the formula to return.
Capture.PNG
At the moment I have a formula as below:
=SUMPRODUCT(--(B:B=$D2),--(A:A<>""))
this will do a countif in column A if column B matches the value in column D, but would not weed out duplicates for me.
Modifying my formula. I have attached the sample workbook below.
Book1.xlsx
View 7 Replies
View Related
May 24, 2013
I have a large workbook with 2 rows of data I want to format (R25:R530, M25:M530). Row M is already populated, row R is new data that I am entering. When the value of a cell in row R is larger than its adjacent cell (R25:M25) in row M, I would like the font to turn red. When the value is smaller, I would like the font to turn green.
With the amount of time I've spent attempting to conditionally format, I could have gone through and formatted each cell individually by now!
View 8 Replies
View Related
May 22, 2007
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range
Dim WB As Workbook
Dim MyPath As String
Dim lastCol As Integer
Dim newRange As Range
lastCol = Cells(6, Columns.Count).End(xlToLeft).Column
Set newRange = Range(Cells(6, 1), Cells(6, lastCol))
MyPath = "F:AccountingAPAdvertising AccountsLA TimesAgentExtractorCompletedLIST"
For Each Rng In newRange '
View 9 Replies
View Related
