Open Workbook, Find Last Row & Paste, Save And Close
Jun 13, 2008
What i need to do is Open a Closed workbook (which i have done in the code below)
1 . When this book opens there is a msgbox that needs to have "template" pasted in to then ok automatically clicked ( i have no clue if this can even be done)
2. Then go to Sheet("contactor info") find last row then paste certain info. Below is a peice of code i have from the open workbook but of corse it doesnt work. The red is where it hangs up.
openpath = ActiveWorkbook.Path & ""
Set wb = Workbooks.Open(openpath & "Template.xls")
With wb.Sheets("Contractor Info")
. Cells(Sheets("Contractor info").Rows.Count, "B").End(xlUp)(2, 1).Select
ActiveCell.Value = Msg1
ActiveCell.Offset(0, 4).Value = Msg2
ActiveCell.Offset(0, 5).Value = Msg3
ActiveCell.Offset(0, 3).Value = Msg5
ActiveCell.Offset(0, 2).Value = Msg4
ActiveCell.Offset(0, 1).Value = Msg6
ActiveCell.Offset(0, 6).Value = Msg7
Application.Calculation = xlCalculationManual..................
View 2 Replies
ADVERTISEMENT
Mar 14, 2014
I need to have a workbook (all of them in a folder, ideally) refresh in the middle of the night. The file is large so the refresh takes a full minute. I know I can't auto refresh a closed workbook (pretty sure anyway), and I can't leave the workbook open for various reasons.
So I'm thinking I could have a macro in an open excel (it kicks off on open) that will open a particular workbook elsewhere (the one I need refreshed), open it, refresh it and close/save it. Ideally it would do this for the entire group of workbooks in the folder but I'd be happy to start with just one. I would like to set it to occur every twelve hours (so at midnight, say, this would occur - I would just have to leave the workbook with the macro in it open on a computer so that it runs and completes this task every night).
View 7 Replies
View Related
Mar 12, 2014
I've got a kind of "menu" sheet that will pull up various reports from Excel spreadsheets. Rather than having the user work with the live data, the menu opens the file and saves it as a copy, closing the original. This is working fine.
The tweak I want to add is, since the user is looking at a copy rather than the live data, I don't want them to save when closing. Is it possible to programatically add a bit of code to the new copy to handle this?
Here's a sample of one of the menu button's code:
Code:
Private Sub CommandButton18_Click()
Dim wb As Workbook
Set wb = Workbooks.Open(Filename:="J:Z PII OvensRack Repair TrackingRack Repair List.xlsx")
With wb.Worksheets("Sheet1")
.Unprotect Password:="pass"
ActiveWorkbook.Worksheets("Sheet1").Copy
End With
[Code].....
View 7 Replies
View Related
Mar 8, 2013
I have a macro that opens all workbooks from one directory and runs a macro for each workbook to clean up the data. I cannot figure out how to take all those open workbooks and save them to another directory and close the workbook. Also, I do not want the macro workbook (xlsm) to save. I only want it to close. I am working in 2007 Excel.
View 8 Replies
View Related
Feb 11, 2013
Using the developer tab I inserted an Active X combo box. Under properties I referenced a 'linked cell' that I want the data to appear in. This box works great as long as I keep the sheet open. Once I save and close the workbook and re-open, that reference is lost. It shows #REF! in that field. Why does it lose the reference? I have tried to reference a cell on the same sheet as well as a cell in a different sheet and it keeps the sheet name but not the individual cell.
View 13 Replies
View Related
Aug 3, 2009
I have a 'Summary' workbook which collates values from a series of 'sub-workbooks', (and can also update values in those sub workbooks).
the subworkbooks are setup so that when they are saved they also copy certain values out to another 'backup' file.
So there are 2 possible routes that the files will be used in:
1) SubWorkbook opened directly
- User opens SubWorkbook and makes some changes.
- User closes the SubWorkbook saving changes, or clicks the save button. The BeforeSave event opens the "restore" workbook, copies over the key values from the subworkbook, then saves & closes the "restore" workbook.
2) SubWorkbook opened remotely
- User / Admin opens the "Summary" workbook and changes an option.
- The summary workbook opens a subworkbook and makes changes, then saves it. The subworkbook should (as before), then open the restore workbook and save the key values etc.
The problem is in the second scenario the 'restore' workbook doesn't get opened.
I have created a set of 3 workbooks to illustrate the problem here.
Book1.xls = Summary workbook
Book2.xls = Subworkbook
Book3.xls = Restore workbook.
If you open book2 and then save it the 'BeforeSave' event will cause it to open book3 and write the output of 'Now()' to the next free row of book3-columnA, before then closing and saving book3,......
View 3 Replies
View Related
Aug 16, 2008
I need to open about 2000 documents one at a time, and save them with a different name.
they are a mix of word documents, PDFs and .jpg pictures.
some VBA like:
Open.file strPath & nextfile
where strpath = C:Temp
and nextfile = picture01.jpg
What should the line be? or is it more complex than a single line ?
View 9 Replies
View Related
Feb 15, 2010
Created a new tab and menu buttons on the Ribbon in Excel in 3 separate .xltm files. Everything worked great through all of the development and testing, but when we went live we got reports of a bug. Here is what is happening...
User opens the template file and immediately saves it as a .xlsm file with a new name in a new location. The user then does various amounts of work in the file. When the user needs to use one of the tools on the custom tab, it is as if the buttons are inactive or not associated with any actions. The tab and buttons are all visible, the animation of the button being pressed works when any of the buttons are clicked, but nothing happens. The user can close and reopen the file and the ribbon buttons will work correctly, but not until they close and reopen.
Upon digging into the problem, we found that if the user clicks on the custom tab before they save the file, all of the buttons will work correctly after the save. But if the tab is not activated before the save, they dont work until a close and reopen.
The XML code is good because if I place it in a add on file (.xlam) and trigger it from the main file, there is no problem. But this is not a good solution since the add on file needs to be located in the same file that the main file is run from which can be any number of places.
View 3 Replies
View Related
Apr 6, 2013
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
View 7 Replies
View Related
Mar 25, 2014
I am using Task scheduler to open a workbook which has some connections to an ODBC that are set to refresh on opening.
I need to automate:-
One of the sheets needs to recalculate for the sort by ascending code to run on the sheet.
Save and then close after say 2 minutes of opening (to give the ODBC connections enough time to finish).
View 2 Replies
View Related
Jan 23, 2014
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
View 4 Replies
View Related
Dec 11, 2013
How can i save and close one workbook in excel with vba code.
View 2 Replies
View Related
Jul 8, 2006
One of my computers pulls info from my cash register once everyday (sales info). Then I have a excel monthly sales sheet that pulls the info from the register info and puts it in the right places. So the computer pulls the register info at 9:20pm everyday, then I have my task manager open excel at 9:25 everyday and it has a workbook open macro to automatically pull the info into the excel spreadsheet. Here's my problem-- I need to close it.
I'm sure I could use a workbook close macro, but when it tries to close it won't it come up with a save, don't save, cancel prompt? Nobody will be there to hit SAVE so it won't close? Is there just a macro that could save it then close it?
View 9 Replies
View Related
Dec 15, 2009
I call the macro below from a Workbook_BeforeClose sub; however, if the user has not saved changes before they hit the close then the Sub SaveFile runs and then after the backup save they are then asked do you want to save changes.
I initially had this sub run with Workbook_BeforeSave, but I don't really want to run this everytime the user selects save.
Any ideas on how to how the save changes first and then the backup?
View 6 Replies
View Related
Oct 2, 2007
I am testing the following section of code.
Sub Macro1()
Dim NewWB As Workbook, NewName As String
Set NewWb = Workbooks.Add
NewName = Application.GetSaveAsFilename(ThisWorkbook.Name)
NewWb.SaveAs NewName
NewWb.Close False
Workbooks.Open (ThisWorkbook.Path & "/" & ThisWorkbook.Name)
End Sub
It seems like I need to rename the sheet I am working on in order for this code to work. If I do not, it tells me that it "cannot save this workbook with the same name as another open workbook".
I am trying to use this code to get around an error with Excel described here: [url]
I would like to have the sheet save itself (not "Save As"), close, reopen, and continue running the macro. What adjustments do I need to make to this code to do this. I have tried different things, but I must be getting the syntax wrong.
View 9 Replies
View Related
Jan 9, 2009
I'm not sure what I'm missing here, but I am trying to exit a spreadsheet using VBA code without saving changes.
The following code, to my mind, should work, but I keep getting a dialog asking if I want to save changes.
'* ensure workbook does not request user to save it...
ThisWorkbook.Saved = True
'* exit Excel...
Application.Quit
View 9 Replies
View Related
May 13, 2009
I am trying to create a form button that will save as and close the active workbook. I have the Save As code working but I can't find any code to close the workbook that will work. A couple of issues: I don't have control of what the workbook is called - the user will name it - so I can't do a simple Workbooks (" ").Close. Also, I don't want to quit the application. I don't know if the user will have other worksheets open. I also tried ActiveWorkbook.Close and that didn't seem to work either. Not sure what I am doing wrong.
View 9 Replies
View Related
Oct 2, 2007
Workbook 1 has references to workbooks 2,3,4,5,6. When I click the top cross and choose Save All with Workbook 1 active, the deactivate event in workbook 6 runs to the end as it tries to close, but it can't close because workbook 1 references it. So nothing further happens until I click the top cross again. Then everything closes without any more prompts. Not good. If I could ensure workbook 1 closes first that should solve the problem. There may be another way of course.
I have attached 2 blank files to show the problem. test1 references test2. Open test1. It will open test2. Make a change to both files, activate test 1 and click the top cross, choose save all. Nothing happens usually.
View 4 Replies
View Related
Sep 22, 2007
Code to check if a workbook is open, and close it, if it is.
View 4 Replies
View Related
Jan 30, 2008
Two workbooks named"test1.xls"test2.xls
I have a userform in "text1.xls" workbook when I click on commandButton it validates Staff name and Staff number stored in sheet1 of "test1.xls" workbook and opens test2.xls file which is in different folder. Problem is how do I code to close or unload "test1.xls" after opening test2.xls
Private Sub goButton_Click()
F$ = "D: estFiles est2.xls"
' can I use Path so I don't need to type the full directory path
Workbooks.Open Filename:=F$
End Sub
View 5 Replies
View Related
Nov 13, 2011
I am relatively new to writing script in excel. I have a 34 sheet workbook that includes inputs, intermediate calculations and then reporting outputs.
I am trying to write macros to do the following
1. On opening - all sheets except a contents page (with macro buttons on it) are hidden
2. One of the macros on this page will unhide all sheets (i.e. a 'developer mode')
3. One of the macros will unhide all relevant input and reporting sheets (i.e. a 'user mode')
I originally set up macros to run on workbook opening that hid all sheets except the contents page and this was working but ran into trouble when I opened up the 'User Mode' saved my changes and exited - the macro didnt work when I went to open again (I think because some of the sheets were visible and some werent and it was trying to hide sheets that were already hidden).
To counter this I set up a macro that made all worksheets visible on workbook closing - this works except I keep getting a 'Save' prompt from excel because the location of selected cells (or the sheet I am viewing) has changed from last opening (not to mention the inputs may change).
I am thinking the best way to fix this as follows:
1. Keep the opening macro the same
2. Keep the user/developer macros the same
3. On closing - develop a macro that unhides all sheets after the user has selected whether or not they have made changes to the sheet in a pop up message box - if they choose yes then they are prompted to save as and then the macro to hide all sheets runs on the new version - if they choose no then they are not prompted to save the document (i.e. next time they open they will be opening back at the contents page with the same inputs they started with in the previous session).
View 1 Replies
View Related
Nov 26, 2012
I have a menu workbook with macro buttons that call different workbooks. Call the menu workbook (switchgear.xlsm). Switchgear contains 2 buttons. Button 1 closes switchgear and opens Book1. Button 2 closes switchgear and opens book 2.
If book1 is open and nothing has changed for 3 minutes I would like it to close and open switchgear.xlsm. I do not want it to just close in 3 minutes... I want it to close after 3 minutes of inactivity.
I have search all over and tried and tried to achieve this without success...
I have been able to get the timer to work but it gets caught in a loop. If I open book1 and close it in less than a min then 3 minutes later out of nowhere the code tries to run???
Secondly when this happens I see several book1 vba projects loaded in the editor window???
View 9 Replies
View Related
Dec 21, 2006
I have an excel file stored on a network drive for the purpose of information sharing. (File protected with a password)
But some the guys leave the file open for quiet long time and hence I cannot open the file for updating the data.
-I need to have a macro that runs every 5 minutes and displays an alert message saying "Please close the File" as long as the file is kept open.
-A second macro with a modified version of the above to close the file automatically after 5 minutes from file opening time after showing an alert message "You cannot leave the File Open, File is Closed Automatically!"
View 9 Replies
View Related
Jul 31, 2007
I want code to:
Open EstimatingSheet.xls
SaveAs current workbook as Range B13 &".xls"
Open EstimatingSheet.xls workbook from somewhere on C:
Then close the one with B13.xls
View 9 Replies
View Related
Jan 10, 2008
I have a userform that opens a woorkbook and fills some textbox from that woorkbook. Although that it goes very fast it is still visible (sometime just in the toolbar) and flickers the screen. Is it possible to open it "hidden"?
Private Sub UserForm_Initialize()
Application.ScreenUpdating = False
On Error Resume Next
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True
Sheets("Calc").Activate
Label4 = Range("K7")
Label5 = Range("L7")
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Caption = Now
TextBox1.SetFocus
Application.ScreenUpdating = True
End Sub
View 3 Replies
View Related
May 3, 2007
I have a sheet that users fill out and there is a macro on that sheet to copy the info to another workbook, save and close.
for some reason, the date, which originates from a cell with the value "=Today()", and when pasted in to the new book, it is pasted values.
the issue is, every so often, the date will say 09/26/10 and continue to do so for quite a few entries.
i have tried almost everything. I checked the dates on the computers, and all are fine. i even went through it step by step, and when the data pasted it, it was 09/26/10.
View 9 Replies
View Related
Jul 26, 2007
I have create a menu with buttons that are attached to the different projects of vba. This menu will be put in the server of my department so all my colleagues can take profit of the macros. Is a menu in an excel file that only contains the vba projects, not the sheets where the macros are supposed to run. My problem start when you want to open the file. It will always be in the same disk "P:COAP", and then there are more subdirectories (year, month)... so the total path, for example, this month is:"P:COAP2007200706". But every month, it changes, logically.
The problem is that i need to open a file with the name "COAP-200706 Concentració Empresa Emissora" in this case... the only thing that changes is month, and year...
I want to close the booke i choose, to avoid errors, if the name of the workbook chosen is different to a part of this string. In this case, i'm trying to close the book if the name of the file or the book don't contains the string "Concentració Empresa Emissora", without saving changes, of course... because sometimes people have chosen badly the files and they've made a disaster. If the file chosen contains this string in the name i want to continue with all the code that is written after.
ChDrive "P:"
ChDir "P:COAP2007"
NouFitxer = Application. GetOpenFilename
If NouFitxer = "" Then Exit Sub
Workbooks.Open Filename:=NouFitxer
If ActiveWorkbook.Name <> "*" & "Concentració Empresa Emissora" & ".xls" Then
Msg = MsgBox("Error in the file opened. Look at the name of the file next time." _
& vbCrLf & "The program will close without finishing the process. Start again. Thanks", _
vbOKOnly + vbCritical, ("END OF PROCESS"))
ActiveWorkbook.Close Savechanges:=False
Exit Sub
End If
View 2 Replies
View Related
Aug 26, 2006
I snagged this code out from another project I wrote, and it works fine in that one, but doesn't in the new project.
What I want, is when the person presses the exit button, it will save whatever was done, its running as a form printer and database. The code below is the code for my exit button.
Private Sub CommandButton4_Click()
Dim sAnswer As String
Dim i As Integer
' ****************
' ** Exit Button**
' ****************
When it gets to "If ActiveWorkbook.Saved = False Then" it does put the question out "Do you want to save changes" I click Yes and it doesn't save it.. I have tried both activeworkbook and thisworkbook ... I copied the code and verified all is good to go..
View 9 Replies
View Related
Dec 5, 2008
I have a workbook, "A", that while open I need to be able to detect any type of activity within other open Excel workbooks "B...Z" that are simultaneously open.
I understand that I would need to use the Class Module with a Public WithEvents function but I am stuck here.
View 5 Replies
View Related
Feb 9, 2007
I have Excel 2002. If I start the program it opens with a blank workbook, called "Book 1".
If I then open an existing workbook, I have two Excel buttons in the Windows taskbar: the one I just opened, and the blank one titled Book 1.
At work I have Excel 2003. The blank "Book 1" is also there when I start the program, but if I then open an existing workbook, the Book 1 goes away. I like this way better.
My question is: Is this just the way versions 2002 vs. 2003 work, or can I change a setting somewhere to make Excel 2002 close its default blank workbook when I open an existing one?
View 9 Replies
View Related
