I am trying to create a template application where the user will use buttons to show the open file dialog box and select two files, and I want these files to open in the same workbook, in different sheets.
View 6 RepliesI have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB:
Sub OpenWorkbooks()
Dim WorkbookOpen()
Dim WBnames() As String 'Array of WorkBooks to be Open
Dim WorkbookCnt As Integer
[Code] .....
I have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
open macro-
Private Sub Workbook_Open()
Dim dTime As Date
dTime = Time
If dTime >= TimeValue("9:30 PM") And _
dTime < TimeValue("9:40 PM") Then
ImportData
End If
End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I have the code below. It openes all csv files within a folder, then delete rows depending on the value of a cell. Now it needs to save the file as a xls file ....
View 9 Replies View RelatedI have a presentation that I open from a short-cut. After the "Welcome Page" is opened, I want to open a second workbook in a new instance of Excel after 4 seconds.
I think that I can open the new instance of excel, but I don't know how to activate the macro after 4 seconds.
I'm sure there is a function someplace for this that can be used in a macro.
Then, after the second Workbook is opened, I want the Welcome Page "Workbook" closed, leaving the second Worbook open.
My Splash screen opens a few seconds after the workbook has loaded. Is there a way to make the workbook open minimzed until the the splash screen closes then open properly? What I trying to say is that only the splash screen is visible until it closes.
View 5 Replies View RelatedI would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
View 5 Replies View Relatedthis is a relatively straightforward query, would be obliged for any tips on same. I have the following piece of -
View 2 Replies View RelatedCreate a full copy of an open workbook (eg. activeworkbook MyFile.xls) using VBA, with the new copy (eg Book1.xls) open as well ,without having to save a copy first then open it ?
View 9 Replies View RelatedI did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet()
If ActiveSheet.Index <> Sheets.Count Then
Application.DisplayAlerts = False
Set ws = ActiveSheet
Sheets(ws.Index + 1).Delete
ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2")
'Moves active sheet to beginning of named workbook.
'Replace Test.xls with the full name of the target workbook you want.
Application.DisplayAlerts = True
End If
End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
When I open some csv files with this code : "Workbooks.Open myDir & "" & strFilename" it will open all messy.
View 1 Replies View RelatedI quite often bring spreadsheets home to work on, but in the last few days it seems that any sheet with a macro produces an error message when I try to open it on my home pc.
(Excel has encountered a problem and needs to close) The files are created with excel 2003 and my home version is 2002. Previously this has not been a problem. I can still load versions of the same spreadsheet from a week ago, but not any recent sheets containing macros. Macro security is set to medium - always was.
Is there a setting somewhere that could have inadvertantly been changed that is causing this problem?
I was trying to read BMP file. But when ever there are NULL char in File Left,Right doesn't work. Does any one have any alternative for this. For Eg. here are first 10 bytes of a BMP file. 42 4D 4E 01 00 00 00 00 00 00 3E
Open [C2].Value For Input As #BMP_Src 'Read BMP As Input File
While EOF(BMP_Src) = 0
Line Input #BMP_Src, sTemp
While Len(sTemp)
ActiveSheet. Cells(iRow, iCol).Value = Left(sTemp, 1) 'Update readed Char
x = Left(sTemp, 1) 'Temp Var to see Char
sTemp = Right(sTemp, Len(sTemp) - 1) 'Remove Updatd Char
iCol = iCol + 1 'Update Col Count
If iCol > 10 Then 'Init Col Count
iCol = 1 '
iRow = iRow + 1 'Inc Row Count
End If
Wend
Wend
In this code after reading 4th Byte Code jump to 10th Byte. because Left, Right consider NULL as endof string. I asked this Question to know if there is any alternative way to read NULL char in VBA.
I have an Excel application in which I use the Workbook Open event to show a userform.
This works fine when Excel is not already open, but if another Excel workbook is already open, the Workbook Open event does not work.
I receive excel reports every day. But the last couple of days when downloading the reports I get them as csv. Also older reports I have saved on the hard disk open as csv.
Well, the ones I have saved have are now csv files and I haven't done anything (knowingly) to change them to csv.
I would like to create a button that will open a file in a location based on the date of the file. So if I click the button the file with the latest date is activated as read only. The file name is always the same except, the date is added to the file name each day.
View 14 Replies View RelatedWhat I am trying to do is set up a few command buttons on my userform that will allow the user to open a specific folder, browse, and then open the file of their choice.
Is this possible?
I have created a Spreadsheet that does all of the calculations, analysis, graphs, etc. that i need; however every time I wish to use this spreadsheet I need to first open up a spreadsheet with data, copy it and then paste it into the original spreadsheet. While this is not horrible, it is quite tedious to do several thousand times.
Thus, I was wondering if it were possible to create a Macro that would open up all files in a specific folder, then select each one and paste the relevant data into my original spreadsheet. I know this possible for specific files; for example, I have created a Macro that will select files data.xls, dats1.xls, data2.xls, and paste these into the spreadsheet, but I was wondering if there was a way to generalize this so that it will simply open every file regardless of the name or how many files there are in the specific folder.
I have files stored at C:KLQ1. Some with .xls and some with .xlsm. Now I want to same all the files under C:KLQ2 with .xlsm extension. Then replace all the 2005 with 2006 in the saved-as file. Then close all the files in Q1 without saving and all the files in Q2 with saving. The following code is modified from somewhere but does not work.
Code:
Sub OpenCloseFile()
Dim i As Integer
Dim wbResults As Workbook
Dim ws As Worksheet
[Code]....
I have a prompt for the user to select a folder and then assign the path a variable. I would then like the VBA macro to open all files within that folder (no sub folders) that end in .xls.
View 3 Replies View RelatedI want open excel files in a folder with ascending order how can I do this,
Eg:- In C:6-11-28 folder there are files as F1.xls, F2.xls , F3.xls......
I want to open above files and get some data from each excel file
Folder name change as System date
If i have a folder with multiple csv files in it, all with different names can i get a macro to open all these files.
I know that i can if they are always the same name each time i run the macro but what i would like to do is to change the name of the csv files daily.
The reason is because i could have upto 50 different files a day.
So basically i'd like to click a button and open all the contents of the folder regardless of the name of the files inside.
What is the code to oepn notepad files?
Get error if uses code below:
Dim noteApp As Object
Set noteApp = CreateObject("notepad.Application")
The background is that I only use macros for a few limited files to save me some time spent on monotonous clicking. Well, yesterday I made three little macros that clear the info in three weekly files and save each with a new date (in preparation for me adding the new info). When I left yesterday, the macros worked as intended. I come in to work this morning, and each of those files now open automatically whenever I open any other file in Excel (just for the first one, nothing happens if I open a second).
View 3 Replies View RelatedI am writing to see if this can be done. I have a master file that I want to open up to 80 files in a directory. For example, if I select Janauary as the Master file month to process for it to open up all files lastname_firstname_Jan01_15 and lastname_firstname_Jan16_Jan31.
I want it to populate the Master file based on criteria set in column A for that file.
Also, two of the fields need to be a sum from all of the files.
i have this code below that opens a prn file. What i want it to do now is to open the next prn file within the folder. I want it to continue until it opens all of them in the folder.
Sub Macro1()
Dir ("D:FTP dataOrder Assessment*.prn")
Workbooks.OpenText Filename:="D:FTP dataOrder Assessment*.prn", _
Origin:=xlWindows, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:= _
Array(Array(0, 1), Array(8, 1), Array(12, 1), Array(31, 1), Array(44, 1), Array(59, 1), _ Array(72, 1), Array(84, 1), Array(93, 1), Array(103, 1), Array(114, 1), Array(123, 1))
End Sub